Dell PowerEdge 2950 クイックスタートガイド

カテゴリー
サーバー
タイプ
クイックスタートガイド
www.dell.com | support.dell.com
Dell™ PowerEdge™ 2950 Systems
Getting Started
With Your System
系统使用入门
はじめに
시스템시작하기
Model EMS01
www.dell.com | support.dell.com
Dell™ PowerEdge™ 2950 Systems
Getting Started With
Your System
Notes, Notices, and Cautions
NOTE: A NOTE indicates important information that helps you make better use of your computer.
NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid
the problem.
CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.
____________________
Information in this document is subject to change without notice.
© 2005 Dell Inc. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.; Intel and Xeon are registered trademarks of Intel Corporation;
Microsoft and Windows are registered trademarks and Windows Server is a trademark of Microsoft Corporation; Novell and NetWare are
registered trademarks of Novell, Inc.; Red Hat is a registered trademark of Red Hat, Inc.; SUSE is a registered trademark of SUSE LINUX
Products GmbH.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products.
Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
Model EMS01
November 2005 P/N DD247 Rev. A00
Getting Started With Your System 3
System Features
The major hardware and software features of your system include:
One or two Dual-Core Intel
®
Xeon
®
Processors 5000 Sequence.
Support for symmetric multiprocessing (SMP), which is available on systems with two Intel Xeon
processors. SMP greatly improves overall system performance by dividing processor operations
between independent processors. To take advantage of this feature, you must use an operating
system that supports multiprocessing.
NOTE: If you decide to upgrade your system by installing a second processor, you must order the
processor upgrade kits from Dell. Not all versions of the Intel Xeon processor will work properly as
additional processors. The upgrade kit from Dell contains the correct version of the processor, heat sink,
and fan as well as the instructions for performing the upgrade.
A minimum of 512 MB of 533 or 667 (when available) MHz, Fully Buffered DIMMs (FBD),
upgradable to a maximum of 32 GB by installing combinations of 256-MB, 512-MB, 1-GB, 2-GB,
or 4-GB memory modules in the eight memory module sockets on the system board.
The system also features redundant memory, which provides memory sparing or memory
mirroring. Either feature is available if eight identical memory modules are installed.
Support for up to six 3.5-inch, internal hot-pluggable Serial Attached SCSI (SAS) or SATA hard
drives without optional media bay, or up to four 3.5-inch internal hot-pluggable SAS or SATA hard
drives with optional media bay, or eight 2.5-inch internal hot-pluggable SAS hard drives.
The optional media bay (available with the 3.5-inch x4 and 2.5-inch x8 backplane configurations)
provides support for an optional half-height tape backup unit (TBU) and an optional single,
1.44-MB, 3.5-inch diskette drive.
An optional slim-line IDE CD, DVD, or combination CD-RW/DVD drive.
NOTE: DVD devices are data only.
An intrusion switch that signals the appropriate systems management software if the top cover is
opened.
Up to two hot-pluggable, 750-W power supplies in an optional 1 + 1 redundant configuration.
Four hot-pluggable system cooling fans.
4 Getting Started With Your System
The system board includes the following features:
One of the following left riser card options:
A left riser card that has one full-length PCIe x8 lane slot and one full-length PCIe x4 lane slot.
OR
A left riser card that has two full-length PCI-X 3.3-V, 64-bit,133-MHz slots on separate PCI-X buses
(capable of throttling back to support legacy PCI add-in cards).
A center riser card that has one half-length PCIe x8 lane slot.
Dedicated slot for an integrated SAS host bus adapter or an optional RAID controller card with
256 MB of cache memory and a RAID battery. The internal channel supports up to eight 2.5-inch SAS
or six 3.5-inch SATA hard drives.
NOTE: System boot is not supported from an external device attached to a SAS or SCSI adapter, including
SAS 5/E, PERC 5/E, or PERC 4e/DC. See support.dell.com for the latest support information about booting
from external devices.
Two integrated Gigabit Ethernet NICs, capable of supporting 10-Mbps, 100-Mbps, and 1000-Mbps
data rates.
Four USB 2.0-compliant connectors (two on the front and two on the back) capable of supporting
a diskette drive, a CD-ROM drive, a keyboard, a mouse, or a USB flash drive.
Optional remote access controller (RAC) for remote systems management.
An integrated VGA-compatible video subsystem with an ATI ES1000, 33-MHz PCI video controller.
This video subsystem contains 16 MB of DDR SDRAM video memory (nonupgradable). Maximum
resolution is 1600 x 1200 with 64 K colors; true-color graphics are supported in the following
resolutions: 640 x 480, 800 x 600, 1024 x 768, 1152 x 864, and 1280 x 1024. When the optional RAC
is installed, the video resolution is 1280 X 1024.
Systems management circuitry that monitors operation of the system fans as well as critical system
voltages and temperatures. The systems management circuitry works in conjunction with the systems
management software.
Standard baseboard management controller with serial access.
Back-panel connectors include one serial, one video, two USB, and two NIC connectors.
Front-panel connectors include a video and two USB connectors.
Front-panel 1x5 LCD for system ID and error messaging.
System ID button on the front and back panels.
For more information about specific features, see "Technical Specifications" on page 10.
Getting Started With Your System 5
Supported Operating Systems
Microsoft
®
Windows Server
2003 Standard, Enterprise, and Web Editions
Microsoft Windows Server 2003 Standard and Enterprise x64 Editions
•Red Hat
®
Enterprise Linux AS and ES for Intel x86 (versions 3 and 4)
Red Hat Enterprise Linux AS and ES for Intel Extended Memory 64 Technology (Intel EM64T)
(version 4)
•SUSE
®
Linux Enterprise Server 9 for Intel EM64T
•Novell
®
NetWare
®
6.5 (when available) (not available factory-installed)
Other Information You May Need
CAUTION: The Product Information Guide provides important safety and regulatory information. Warranty
information may be included within this document or as a separate document.
The
Rack Installation Instructions
or
Rack Installation Guide
included with your rack solution
describes how to install your system into a rack.
The
Hardware Owner’s Manual
provides information about system features and describes how to
troubleshoot the system and install or replace system components. This document may be found on
the CDs that came with your system, or on
support.dell.com
.
CDs included with your system provide documentation and tools for configuring and managing your
system.
Release notes or readme files may be included to provide last-minute updates to the system or
documentation or advanced technical reference material intended for experienced users or
technicians.
Obtaining Technical Assistance
If you do not understand a procedure in this guide or if the system does not perform as expected, see
your Hardware Owner’s Manual.
Dell™ Enterprise Training and Certification is available; see www.dell.com/training for more
information. This service may not be offered in all locations.
Installation and Configuration
CAUTION: Before performing the following procedure, read and follow the safety instructions and important
regulatory information in your Product Information Guide.
This section describes the steps to set up your system for the first time.
6 Getting Started With Your System
Unpacking the System
Unpack your system and identify each item.
Keep all shipping materials in case you need them later.
Installing the Rails and System in a Rack
Once you have read the "Safety Instructions" located in the rack installation documentation
for your system, install the rails and the system in the rack.
See your rack installation documentation for instructions on installing your system in a rack.
Getting Started With Your System 7
Connecting the Keyboard, Mouse, and Monitor
Connect the keyboard, mouse, and monitor (optional).
The connectors on the back of your system have icons indicating which cable to plug into each
connector. Be sure to tighten the screws (if any) on the monitor's cable connector.
Connecting the Power
Connect the monitor (optional) and system power, and connect the system’s power cable(s) to
the system. If your system has an expansion card with a video output connector,
do not
connect
the monitor to system’s integrated video connector. Instead, connect the monitor cable to the
connector on the expansion card.
Plug the other end of the cable into a grounded electrical outlet or a separate power source
such as an uninterrupted power supply (UPS) or a power distribution unit (PDU).
8 Getting Started With Your System
Installing the Power Cord Retention Bracket
Attach the power cord retention bracket on the right bend of the power supply handle. Bend the
system power cable into a loop as shown in the illustration and attach to the bracket’s cable clasp.
Repeat the procedure for the second power supply.
Plug the other end of the power cables into a grounded electrical outlet or a separate power source
such as an uninterrupted power supply (UPS) or a power distribution unit (PDU).
Turning on the System
Turn on the system and monitor (optional).
Press the power button on the system and the monitor. The power indicators should light.
Adjust the monitor's controls until the displayed image is satisfactory.
Getting Started With Your System 9
Installing the Bezel
Install the bezel (optional).
Complete the 0perating System Setup
If you purchased a preinstalled operating system, see the operating system documentation that ships
with your system. To install an operating system for the first time, see the Quick Installation Guide.
Be sure the operating system is installed before installing hardware or software not purchased with
the system.
10 Getting Started With Your System
Technical Specifications
Processor
Processor type One or two Dual-Core Intel Xeon Processors 5000
Sequence.
Expansion Bus
Bus type PCI-X, PCIe
Expansion slots
Center riser:
PCIe
one half-height x8 lane 3.3-V (slot 1)
Left riser
PCI-X option:
PCIe option:
two full-height, full-length 3.3-V, 64-bit, 133-MHz
(slots 2 and 3)
OR
one full-height x8 lane 3.3-V (slot 2) and one full-
height x4 lane 3.3-V (slot 3)
Memory
Architecture 533 or 667 (when available) MHz Fully Buffered
DIMMs (FBD)
Memory module sockets eight 240-pin
Memory module capacities 256 MB, 512 MB, 1 GB, 2 GB, or 4 GB
Minimum RAM 512 MB (two 256-MB modules)
Maximum RAM 32 GB
Drives
Hard drives up to six 3.5-inch, internal hot-pluggable SAS
or SATA hard drives without optional media bay,
OR
up to four 3.5-inch internal hot-pluggable SAS
or SATA hard drives with optional media bay
OR
eight 2.5-inch internal hot-pluggable SAS hard
drives
Diskette drive one optional 3.5-inch, 1.44-MB
external optional USB 3.5-inch, 1.44-MB
Getting Started With Your System 11
Optical drive one optional slimline IDE CD, DVD,
or combination CD-RW/DVD
NOTE:
DVD devices are data only.
external optional USB CD
Tape drive one optional internal half height tape backup
device
Flash drive external optional USB
Connectors
Back
NIC
Two RJ-45 (for integrated 1-GB NICs)
Serial
9-pin, DTE, 16550-compatible
USB
Two 4-pin, USB 2.0-compliant
Video
15-pin VGA
Front
Video
15-pin VGA
USB
Two 4-pin, USB 2.0-compliant
Video
Video type ATI ES1000 video controller; VGA connectors
Video memory 16 MB of DDR SDRAM
Power
AC power supply (per power supply)
Wattage
750 W
Voltage
85–264 VAC, autoranging, 47–63 Hz
Heat dissipation
2697 BTU/hr maximum
Maximum inrush current
Under typical line conditions and over the entire
system ambient operating range, the inrush
current may reach 55 A per power supply for
10 ms or less.
Batteries
System battery
CR 2032 3.0-V lithium ion coin cell
RAID battery (optional)
4.1-V lithium ion
Drives (continued)
12 Getting Started With Your System
Physical
Rack
Height
8.656 cm (3.40 in)
Width
44.7 cm (17.6 in)
Depth
75.68 cm (29.79 in)
Weight (maximum configuration)
26.76 kg (59 lb)
Environmental
NOTE: For additional information about environmental measurements for specific system configurations,
see www.dell.com/environmental_datasheets.
Temperatur e
Operating
10° to 35°C (50° to 95°F) with a maximum
temperature gradation of 10°C per hour
Storage
–40° to 65°C (–40° to 149°F) with a maximum
temperature gradation of 20°C per hour
Relative humidity
Operating
20% to 80% (noncondensing) with a maximum
humidity gradation of 10% per hour
Storage
5% to 95% (noncondensing) with a maximum
humidity gradation of 10% per hour
Maximum vibration
Operating
0.25 G at 3–200 Hz for 15 min
Storage
0.5 G at 3–200 Hz for 15 min
Maximum shock
Operating
One shock pulse in the positive z axis (one pulse
on each side of the system) of 41 G for up to 2 ms
Storage
Six consecutively executed shock pulses in the
positive and negative x, y, and z axes (one pulse
on each side of the system) of 71 G for up to 2 ms
Altitude
Operating
–16 to 3048 m (–50 to 10,000 ft)
Storage
–16 to 10,600 m (–50 to 35,000 ft)
www.dell.com | support.dell.com
Dell™ PowerEdge™ 2950 系统
系统使用入门
注、注意和警告
注:注表示可以帮助您更好地使用计算机的重要信息。
注意:
注意表示可能会损坏硬件或导致数据丢失,并告诉您如何避免此类问题。
警告:
警告表示可能会导致财产损失、人身伤害甚至死亡。
____________________
本说明文件中的信息如有更改,恕不另行通知。
© 2005 Dell Inc.
版权所有,翻印必究。
未经
Dell Inc.
书面许可,严禁以任何形式进行复制。
本文中使用的商标
Dell
DELL
徽标是
Dell Inc.
的商标;
Intel
Xeon
Intel Corporation
的注册商标;
Microsoft
Windows
Microsoft Corporation
的注册商标,
Windows Server
Microsoft Corporation
的商标;
Novell
NetWare
Novell, Inc.
的注册
商标;
Red Hat
Red Hat, Inc.
的注册商标;
SUSE
SUSE LINUX Products GmbH
的注册商标。
本文件中述及的其它商标和产品名称是指拥有相应商标和名称的公司或其制造的产品。
Dell Inc.
对本公司的商标和产品名称之外
的其它商标和产品名称不拥有任何专有权。
型号
EMS01
2005
11
P/N DD247
修订版
A00
系统使用入门 15
系统配置
系统的主要硬件和软件配置包括:
一个或两个双核心
Intel
®
Xeon
®
处理器
5000
序列。
支持对称多处理
(SMP)
,配备两个
Intel Xeon
处理器的系统具有此功能。
SMP
通过在独立
的处理器之间分配处理器操作,从而极大地改善了整体的系统性能。要使用此功能,必须
使用支持多处理的操作系统。
注:如果您准备安装第二个处理器来升级系统,则必须向 Dell 订购处理器升级套件。并非所有
版本的 Intel Xeon 处理器均可作为附加处理器正常工作。Dell 的升级套件包含正确版本的处理
器、散热器和风扇,以及执行升级的说明。
至少
512 MB
533
667
(可用时)
MHz
全缓冲
DIMM (FBD)
,通过在系统板上的八个
内存模块插槽中安装
256 MB
512 MB
1 GB
2 GB
4 GB
内存模块组合,最大可升级
32 GB
系统还配置了冗余内存,可提供内存冗余或内存镜像功能。如果安装了八个完全相同的内
存模块,则同时提供内存冗余或内存镜像功能。
支持多达六个
3.5
英寸、内部热插拔、串行连接的
SCSI (SAS)
SATA
且未配备可选介质
托架的硬盘驱动器,或支持多达四个
3.5
英寸、内部热插拔
SAS
SATA
且配备了可选介
质托架的硬盘驱动器,或八个
2.5
英寸内部热插拔
SAS
硬盘驱动器。
可选介质托盘(可提供
3.5
英寸
x4
2.5
英寸
x8
的背板配置)支持一个可选半高磁带备
份装置
(TBU)
和一个可选
1.44 MB
3.5
英寸软盘驱动器。
一个可选的细长型
IDE CD
DVD
或组合
CD-RW/DVD
驱动器。
注:DVD 设备仅用于数据。
防盗开关,在顶盖被打开时会向相应的系统管理软件发送信号。
多达两个
750 W
热插拔电源设备(可选
1 + 1
冗余配置)。
四个热插拔系统冷却风扇。
系统板包含以下配置:
以下左提升卡选件之一:
- 具有一个全长
PCIe x8
信道插槽和一个全长
PCIe x4
信道插槽的左提升卡。
- 在单独的
PCI-X
总线上具有两个全长
PCI-X 3.3 V
64
位、
133 MHz
插槽的左提升卡
(能够节流以支持传统的内插式
PCI
卡)。
具有一个半长
PCIe x8
信道插槽的中心提升卡。
16 系统使用入门
专用插槽,用于安装集成的
SAS
主机总线适配器或配有
256 MB
高速缓存和
RAID
电池的可选
RAID
控制器卡。内部信道支持多达八个
2.5
英寸
SAS
硬盘驱动器或六个
3.5
英寸
SATA
硬盘
驱动器。
注:不支持从连接到 SAS SCSI 适配器的外部设备引导系统,包括 SAS 5/EPERC 5/E PERC
4e/DC。有关支持从外部设备引导的最新信息,请参阅 support.dell.com
两个集成的千兆位以太网
NIC
,可支持
10 Mbps
100 Mbps
1000 Mbps
数据速率。
四个
USB 2.0
兼容连接器(两个在正面,两个在背面),可以支持软盘驱动器、
CD-ROM
驱动器、键盘、鼠标或
USB
快擦写驱动器。
可选的远程访问控制器
(RAC)
,用于远程系统管理。
VGA
兼容集成视频子系统,带有
ATI ES1000
33 MHz PCI
视频控制器。此视频子系统包含
16 MB
DDR SDRAM
视频内存(不可升级)。使用
64 K
色时最大分辨率为
1600 x 1200
以下分辨率支持真彩色图形:
640 x 480
800 x 600
1024 x 768
1152 x 864
1280 x 1024
如果安装了可选的
RAC
,则视频分辨率为
1280 x 1024
系统管理电路,可监测系统风扇的运行以及系统临界电压和温度。系统管理电路需要与系统管
理软件配合工作。
标准底板管理控制器,支持串行访问。
背面板连接器包括一个串行连接器、一个视频连接器、两个
USB
连接器和两个
NIC
连接器。
前面板连接器包括一个视频连接器和两个
USB
连接器。
前面板
1x5 LCD
显示屏,用于显示系统
ID
和错误信息。
系统
ID
按钮,位于前面板和背面板上。
有关特定配置的详细信息,请参阅第
22
页的“技术规格”。
支持的操作系统
Microsoft
®
Windows Server
2003
标准企业版
Web
Microsoft Windows Server 2003
标准企业版
64
位)
用于
Intel x86
Red Hat
®
Enterprise Linux AS
ES
(第
3
和第
4
用于
Intel 64
扩展内存技术
(Intel EM64T)
Red Hat Enterprise Linux AS
ES
(第
4
用于
Intel EM64T
SUSE
®
Linux Enterprise Server 9
Novell
®
NetWare
®
6.5
(可用时)(安装)
系统使用入门 17
您可能需要的其它信息
警告:
《产品信息指南》,提供了重要的安全信息和管制信息。保修信息可能包括在该说明文件中,
也可能作为单独的说明文件提供。
机架解决方案附带的机架安装说明》机架安装指南》,介了如在机架中安装系
统。
硬件用户手册》提供有关系统部件的信息,何排除系统故障以及如安装或更换
统组件。此说明文件可在系统提供的
CD
找到,或通过
support.dell.com
获得
系统带的
CD
提供了用于配置和管理系统的说明文件和工具。
系统可能带发布注释自述文件,以提供系统或说明文件的最新更新内容,或为有经验
或技术人员提供高级技术参考资料
获得技术帮助
如果本指南中的步骤问,或系统运行无法到预期效果,请参阅硬件用户手册》
Della
可以提供企业培训认证;有关详,请访问
www.dell.com/training
并非国家和地
可提供此服务
安装和配置
警告:
在执行以下过程之前,请阅读并遵循《产品信息指南》中的安全说明和重要的管制信息。
节介绍初次安装系统时的步骤
18 系统使用入门
打开系统包装
打开系统包装并识别每项物品
有运包装材料,以备将来使用。
在机架中安装滑轨和系统
细阅了系统的机架安装说明文件中的“安全说明”之,在机架中安装滑轨和系统。
有关在机架中安装系统的说明,请参阅机架安装说明文件。
1 / 1

Dell PowerEdge 2950 クイックスタートガイド

カテゴリー
サーバー
タイプ
クイックスタートガイド

他の言語で