ASROCK FM2A75M-HD+ Quick Installation Manual

Version 1.0

Published September 2013

Copyright Notice:

No part of this documentation may be reproduced, transcribed, transmitted, or

translated in any language, in any form or by any means, except duplication of

documentation by the purchaser for backup purpose, without written consent of

ASRock Inc.

Products and corporate names appearing in this documentation may or may not

be registered trademarks or copyrights of their respective companies, and are used

only for identication or explanation and to the owners’ benet, without intent to

infringe.

Disclaimer:

Specications and information contained in this documentation are furnished for

informational use only and subject to change without notice, and should not be

constructed as a commitment by ASRock. ASRock assumes no responsibility for

any errors or omissions that may appear in this documentation.

With respect to the contents of this documentation, ASRock does not provide

warranty of any kind, either expressed or implied, including but not limited to

the implied warranties or conditions of merchantability or tness for a particular

purpose.

In no event shall ASRock, its directors, ocers, employees, or agents be liable for

any indirect, special, incidental, or consequential damages (including damages for

loss of prots, loss of business, loss of data, interruption of business and the like),

even if ASRock has been advised of the possibility of such damages arising from any

defect or error in the documentation or product.

e terms HDMI™ and HDMI High-Denition Multimedia Interface, and the HDMI

logo are trademarks or registered trademarks of HDMI Licensing LLC in the United

States and other countries.

is device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

CALIFORNIA, USA ONLY

e Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance

controlled in Perchlorate Best Management Practices (BMP) regulations passed by the

California Legislature. When you discard the Lithium battery in California, USA, please

follow the related regulations in advance.

“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/

perchlorate”

ASRock Website: http://www.asrock.com

PB 1

English

FM2A75M-HD+

SOCKET FM2b

AMD

A75

(Hudson-D3)

Chipset

4

1

1415

ATXPWR1

CPU_FAN1

64Mb

BIOS

FM2A75M-HD+

DDR3_A1 (64 bit, 240-pin module)

DDR3_B1 (64 bit, 240-pin module)

USB8_9

USB6_7

1213

1718192021 16

USB 3.0

T: USB0

B: USB1

RJ-45 LAN

USB 2.0

T: USB2

B: USB3

USB 2.0

T: USB4

B: USB5

PCI Express 3.0

PWR_FAN1

2

3

5

6

7

8

9

23

22

VGA1

DVI1

HDMI

CHA_FAN1

11

1

TPM S1

10

Motherboard Layout

2 3

English

No. Description

1 ATX 12V Power Connector (ATX12V1)

2 Power Fan Connector (PWR_FAN1)

3 CPU Fan Connector (CPU_FAN1)

4 2 x 240-pin DDR3 DIMM Slots (DDR3_A1, DDR3_B1)

5 ATX Power Connector (ATXPWR1)

6 Chassis Speaker Header (SPEAKER1)

7 System Panel Header (PANEL1)

8 SATA3 Connector (SATA _1)

9 SATA3 Connector (SATA _2)

10 TPM Header (TPMS1)

11 Chassis Fan Connector (CHA_FAN1)

12 SATA3 Connector (SATA_4)

13 SATA3 Connector (SATA _3)

14 SATA3 Connector (SATA_6)

15 SATA3 Connector (SATA_5)

16 USB 2.0 Header (USB6_7)

17 USB 2.0 Header (USB8_9)

18 USB 3.0 Header (USB3_2_3)

19 Print Port Header (LPT1)

20 COM Port Header (COM1)

21 Front Panel Audio Header (HD_AUDIO1)

22 Clear CMOS Jumper (CLRCMOS1)

23 Chassis Intrusion Header (CI1)

2 3

English

FM2A75M-HD+

I/O Panel

No. Description No. Description

1 PS/2 Mouse Port (Green) 7 USB 2.0 Ports (USB45)

2 D-Sub Port (VGA1) 8 USB 2.0 Ports (USB23)

3 LAN RJ-45 Port* 9 USB 3.0 Ports (USB01)

4 Line In (Light Blue) 10 HDMI Port

5 Front Speaker (Lime) 11 DVI-D Port (DVI1)

6 Microphone (Pink) 12 PS/2 Keyboard Port (Purple)

1 2

3

5

4

678910

1112

4 PB

English

* There are two LEDs on the LAN port. Please refer to the table below for the LAN port LED indica-

tions.

Activity / Link LED Speed LED

Status Description Status Description

Off No Link Off 10Mbps connection

Blinking Data Activity Orange 100Mbps connection

On Link Green 1Gbps connection

ACT/LINK LED

SPEED LED

LAN Port

PB 5

English

FM2A75M-HD+

1. Introduction

Thank you for purchasing ASRock FM2A75M-HD+ motherboard, a reliable moth-

erboard produced under ASRock’s consistently stringent quality control. It delivers

excellent performance with robust design conforming to ASRock’s commitment to

quality and endurance.

This Quick Installation Guide contains introduction of the motherboard and step-by-

step installation guide. More detailed information of the motherboard can be found

in the user manual presented in the Support CD.

 Becausethe motherboardspecications and theBIOS softwaremight

be updated, the content of this manual will be subject to change without

notice.Incaseanymodicationsofthismanualoccur,theupdatedver-

sion will be available on ASRock website without further notice. You may

ndthelatestVGAcardsandCPUsupportlistsonASRockwebsiteas

well. ASRock website http://www.asrock.com

If you require technical support related to this motherboard, please visit

ourwebsiteforspecicinformationaboutthemodelyouareusing.

www.asrock.com/support/index.asp

1.1 Package Contents

ASRock FM2A75M-HD+ Motherboard (Micro ATX Form Factor)

ASRock FM2A75M-HD+ Quick Installation Guide

ASRock FM2A75M-HD+ Support CD

2 x Serial ATA (SATA) Data Cables (Optional)

1 x I/O Panel Shield

ASRock Reminds You...

To get better performance in Windows

®

8 / 8 64-bit / 7 / 7 64-bit, it is

recommendedtosettheBIOSoptioninStorageCongurationtoAHCI

mode.

6 7

English

1.2 Specications

Platform

• Micro ATX Form Factor

• All Solid Capacitor design

CPU

• Supports Socket FM2+ 95W / FM2 100W processors

Chipset

• AMD A75 FCH (Hudson-D3)

Memory

• Dual Channel DDR3 Memory Technology

• 2 x DDR3 DIMM Slots

• Supports 2133/1866/1600/1333/1066 non-ECC, un-

buffered memory (see CAUTION 1)

• Max. capacity of system memory: 32GB (see CAUTION

2)

• Supports Intel

®

ExtremeMemoryProle(XMP)1.3/1.2

• SupportsAMDMemoryProle(AMP)

Expan-

sion

Slot

• 1 x PCI Express 3.0 x16 Slot (PCIE1 @ x16 mode)

* PCIE 3.0 is only supported with FM2+ CPU. With FM2

CPU, it only supports PCIE 2.0.

• 1 x PCI Express 2.0 x1 Slot

• 1 x PCI Slot

• Supports AMD Dual Graphics

Graphics

• Integrated AMD Radeon HD 8000/7000 series graphics

in A-series APU

• DirectX 11.1, Pixel Shader 5.6 with FM2+ CPU. DirectX

11, Pixel Shader 5.0 with FM2 CPU.

• Max. shared memory 2GB

• Three VGA output options: D-Sub, DVI-D and HDMI

Ports

• Supports Triple Monitor

• Supports HDMI Technology with max. resolution up to

1920x1200 @ 60Hz

• Supports Dual-link DVI-D with max. resolution up to

2560x1600 @ 60Hz

6 7

English

FM2A75M-HD+

Graphics

• Supports D-Sub with max. resolution up to 1920x1200 @

60Hz

• Supports Auto Lip Sync, Deep Color (12bpc), xvYCC

and HBR (High Bit Rate Audio) with HDMI Port

(Compliant HDMI monitor is required)

• Supports Blu-ray Stereoscopic 3D with HDMI Port

• Supports AMD Steady Video

TM

2.0: New video post

processing capability for automatic jitter reduction on

home/online video

• Supports HDCP with DVI-D and HDMI Ports

• Supports Full HD 1080p Blu-ray (BD) playback with

DVI-D and HDMI Ports

Audio

• 5.1 CH HD Audio (Realtek ALC662 Audio Codec)

LAN

• PCIE x1 Gigabit LAN 10/100/1000 Mb/s

• Realtek RTL8111FR

• Supports Realtek RealWoW! Technology

• Supports Wake-On-LAN

• Supports LAN Cable Detection

• SupportsEnergyEfcientEthernet802.3az

• Supports PXE

Rear

Panel I/O

• 1 x PS/2 Mouse Port

• 1 x PS/2 Keyboard Port

• 1 x D-Sub Port

• 1 x DVI-D Port

• 1 x HDMI Port

• 4 x USB 2.0 Ports

• 2 x USB 3.0 Ports (AMD A75 FCH (Hudson-D3))

• 1 x RJ-45 LAN Port with LED (ACT/LINK LED and

SPEED LED)

• HD Audio Jacks: Line in / Front Speaker / Microphone

Storage

• 6 x SATA3 6.0 Gb/s Connectors, support RAID (RAID 0,

RAID 1 and RAID 10), NCQ, AHCI and Hot Plug

8 9

English

Connec-

tor

• 1 x Print Port Header

• 1 x COM Port Header

• 1 x Chassis Intrusion Header

• 1 x CPU Fan Connector (4-pin)

• 1 x Chassis Fan Connector (4-pin)

• 1 x TPM Header

• 1 x Power Fan Connector (3-pin)

• 1 x 24 pin ATX Power Connector

• 1 x 4 pin 12V Power Connector

• 1 x Front Panel Audio Connector

• 2 x USB 2.0 Headers (Support 4 USB 2.0 ports)

• 1 x USB 3.0 Header by AMD A75 FCH (Hudson-D3)

(Supports 2 USB 3.0 ports)

BIOS

Feature

• 64Mb AMI UEFI Legal BIOS with GUI support

• Supports “Plug and Play”

• ACPI 1.1 Compliant wake up events

• Supports jumperfree

• SMBIOS 2.3.1 support

• DRAM, CPU Voltage multi-adjustment

Support

CD

• Drivers, Utilities, AntiVirus Software (Trial Version),

Google Chrome Browser and Toolbar, Start8 (30 days

trial)

Hardware

Monitor

• CPU temperature sensing

• Chassis temperature sensing

• CPU Fan Tachometer

• Chassis Fan Tachometer

• CPU/Chassis Quiet Fan

• CPU/Chassis Fan multi-speed control

• CASE OPEN detection

• Voltage monitoring: +12V, +5V, +3.3V, Vcore

OS

• Microsoft

®

Windows

®

8.1 32-bit / 8.1 64-bit / 8 32-bit / 8

64-bit / 7 32-bit / 7 64-bit / XP 32-bit

Certica-

tions

• FCC, CE, WHQL

• ErP/EuP Ready (ErP/EuP ready power supply is re-

quired)

8 9

English

FM2A75M-HD+

WARNING

Please realize that there is a certain risk involved with overclocking,

including adjusting the setting in the BIOS, applying Untied Overclocking

Technology, or using third-party overclocking tools. Overclocking may

affect your system’s stability, or even cause damage to the components

and devices of your system. It should be done at your own risk and

expense. We are not responsible for possible damage caused by

overclocking.

CAUTION!

1. Whether 2133/1866/1600MHz memory speed is supported

depends on the CPU you adopt. If you want to adopt DDR3

2133/1866/1600 memory module on this motherboard, please

refer to the memory support list on our website for the compat-

ible memory modules.

ASRock website http://www.asrock.com

2. Due to the operating system limitation, the actual memory size

may be less than 4GB for the reservation for system usage un-

der Windows

®

8 / 7. For Windows

®

64-bit OS with 64-bit CPU,

there is no such limitation. You can use ASRock XFast RAM to

utilize the memory that Windows

®

cannot use.

* For detailed product information, please visit our website: http://www.asrock.com

10 11

English

1.3 Unique Features

ASRock A-Tuning

A-Tuning is ASRock’s multi purpose software suite with a new

interface, more new features and improved utilities, including

XFast RAM, Dehumidier, Good Night LED,FAN-Tastic Tun-

ing, OC Tweaker and a whole lot more.

ASRock Instant Boot

ASRock Instant Boot allows you to turn on your PC in just a few

seconds,provides a muchmore efcientway to save energy,

time, money, and improves system running speed for your sys-

tem. It leverages the S3 and S4 ACPI features which normally

enable the Sleep/Standby and Hibernation modes in Windows

®

toshortenbootuptime.BycallingS3andS4atspecictiming

during the shutdown and startup process, Instant Boot allows

you to enter your Windows

®

desktop in a few seconds.

ASRock Instant Flash

 ASRockInstantFlashisaBIOSashutilityembeddedinFlash

ROM. This convenient BIOS update tool allows you to update

systemBIOSwithout enteringoperating systemsrstlike MS-

DOS or Windows

®

. With this utility, you can press the <F6> key

during the POST or the <F2> key to enter into the BIOS setup

menu to access ASRock Instant Flash. Just launch this tool and

savethenewBIOSletoyourUSBashdrive,oppydiskor

hard drive, then you can update your BIOS only in a few clicks

withoutpreparinganadditionaloppydisketteorothercompli-

catedashutility.PleasebenotedthattheUSBashdriveor

harddrivemustuseFAT32/16/12lesystem.

ASRock APP Charger

If you desire a faster, less restricted way of charging your

Apple devices, such as iPhone/iPad/iPod Touch, ASRock has

prepared a wonderful solution for you - ASRock APP Charger.

Simply install the APP Charger driver, it makes your iPhone

charge much quickly from your computer and up to 40% faster

than before. ASRock APP Charger allows you to quickly charge

many Apple devices simultaneously and even supports continu-

ous charging when your PC enters into Suspend to RAM (S3),

10 11

English

FM2A75M-HD+

hibernation mode (S4) or power off (S5). With APP Charger

driver installed, you can easily enjoy the marvelous charging

experience.

ASRock XFast USB

ASRock XFast USB can boost USB storage device perfor-

mance. The performance may depend on the properties of the

device.

ASRock XFast LAN

ASRock XFast LAN provides a faster internet access, which

includes the benefits listed below. LAN Application Prioritiza-

tion:Youcancongureyourapplication’spriorityideallyand/or

add new programs. Lower Latency in Game: After setting online

game’spriorityhigher,itcanlowerthelatencyingames.Trafc

Shaping: You can watch Youtube HD videos and download si-

multaneously. Real-Time Analysis of Your Data: With the status

window, you can easily recognize which data streams you are

transferring currently.

ASRock XFast RAM

ASRock XFast RAM is included in A-Tuning. It fully utilizes the

memory space that cannot be used under Windows® 32-bit

operating systems. ASRock XFast RAM shortens the loading

timeofpreviouslyvisitedwebsites,makingwebsurngfaster

than ever. And it also boosts the speed of Adobe Photoshop 5

times faster. Another advantage of ASRock XFast RAM is that

it reduces the frequency of accessing your SSDs or HDDs in

order to extend their lifespan.

ASRock Crashless BIOS

ASRock Crashless BIOS allows users to update their BIOS

without fear of failing. If power loss occurs during the BIOS up-

dateprocess,ASRockCrashlessBIOSwillautomaticallynish

the BIOS update procedure after regaining power. Please note

thatBIOS lesneed tobe placed inthe rootdirectory ofyour

USB disk. Only USB2.0 ports support this feature.

ASRock OMG (Online Management Guard)

Administrators are able to establish an internet curfew or restrict

internetaccessatspeciedtimesviaOMG.Youmayschedule

12 13

English

the starting and ending hours of internet access granted to other

users. In order to prevent users from bypassing OMG, guest

accounts without permission to modify the system time are re-

quired.

ASRock Internet Flash

ASRock Internet Flash searches for available UEFI firmware

updates from our servers. In other words, the system can auto-

detectthelatestUEFIfromourserversandashthemwithout

entering Windows

®

OS.

ASRock UEFI System Browser

ASRock UEFI system browser is a useful tool included in

graphical UEFI. It can detect the devices and configurations

that users are currently using in their PC. With the UEFI system

browser,youcaneasilyexaminethecurrentsystemcongura-

tion in UEFI setup.

ASRock UEFI Tech Service

Contact ASRock Tech Service by sending a support request

from the UEFI setup utility if you are having trouble with your

PC.

ASRock Dehumidier Function

Users may prevent motherboard damages due to dampness by

enabling“Dehumidier Function”. When enablingDehumidier

Function, the computer will power on automatically to dehumidi-

fy the system after entering S4/S5 state.

ASRock Easy RAID Installer

ASRock Easy RAID Installer can help you to copy the RAID

driver from a support CD to your USB storage device. After

copying the RAID driver to your USB storage device, please

change “SATA Mode” to “RAID”, then you can start installing the

OS in RAID mode.

ASRock Easy Driver Installer

For users that don’t have an optical disk drive to install the

drivers from our support CD, Easy Driver Installer is a handy

tool in the UEFI that installs the LAN driver to your system via

an USB storage device, then downloads and installs the other

required drivers automatically.

12 13

English

FM2A75M-HD+

ASRock Interactive UEFI

ASRock Interactive UEFI is a blend of system configuration

tools, cool sound effects and stunning visuals. The unprec-

edented UEFI provides a more attractive interface and brings a

lot more amusing.

ASRock Fast Boot

With ASRock’s exclusive Fast Boot technology, it takes less

than 1.5 seconds to logon to Windows

®

8 from a cold boot. No

more waiting! The speedy boot will completely change your user

experience and behavior.

ASRock X-Boost

Brilliantly designed for combo overclocking, ASRock X-Boost

Technology is able to unleash the hidden power of your CPUs.

Simply press “X” when turning on the PC, X-Boost will automati-

cally overclock the relative components to get up to 15.77%

performance boost! With the smart X-Boost, overclocking CPU

can become a near one-button process.

ASRock Restart to UEFI

Windows

®

8 brings the ultimate boot up experience. The light-

ning boot up speed makes it hard to access the UEFI setup. AS-

Rock Restart to UEFI technology is designed for those requiring

frequent UEFI access. It is included in ASRock’s exclusive all-

in-one A-Tuning tuning program that allows users to easily enter

the UEFI automatically when turning on the PC next time. Just

simply enable this function; the PC will be assured to access the

UEFI directly in the very beginning.

ASRock USB Key

In a world where time is money, why waste precious time

everyday typing usernames to log in to Windows? Why should

we even bother memorizing those foot long passwords? Just

plug in the USB Key and let your computer log in to windows

automatically!

ASRock FAN-Tastic Tuning

ASRock FAN-Tastic Tuning is included in A-Tuning. Congure

up to vedifferent fanspeeds using the graph. The fans will

automatically shift to the next speed level when the assigned

temperature is met.

14 15

English

2. Installation

This is an Micro ATX form factor motherboard. Before you install the motherboard,

studythecongurationofyourchassistoensurethatthemotherboardtsintoit.

Pre-installation Precautions

Take note of the following precautions before you install motherboard

components or change any motherboard settings.

Before you install or remove any component, ensure that the

power is switched off or the power cord is detached from the

power supply. Failure to do so may cause severe damage to the

motherboard, peripherals, and/or components.

1. Unplug the power cord from the wall socket before touching any

component.

2. To avoid damaging the motherboard components due to static elec-

tricity, NEVER place your motherboard directly on the carpet or the

like. Also remember to use a grounded wrist strap or touch a safety

grounded object before you handle components.

3. Hold components by the edges and do not touch the ICs.

4. Whenever you uninstall any component, place it on a grounded anti-

static pad or in the bag that comes with the component.

5. When placing screws into the screw holes to secure the mother-

board to the chassis, please do not over-tighten the screws! Doing

so may damage the motherboard.

14 15

English

FM2A75M-HD+

2.1 CPU Installation

Step 1. Unlock the socket by lifting the lever up

to a 90

o

angle.

Step 2. Position the CPU directly above the

socket such that the CPU corner with

the golden triangle matches the socket

corner with a small triangle.

Step 3. Carefully insert the CPU into the

 socketuntilittsinplace.

TheCPUtsonlyinonecorrect

orientation. DO NOT force the CPU

into the socket to avoid bending of

the pins.

Step 4. When the CPU is in place, press it

 rmlyonthesocketwhileyoupush  

down the socket lever to secure the

CPU. The lever clicks on the side tab

to indicate that it is locked.

16 17

English

2.2 Installation of CPU Fan and Heatsink

After you install the CPU into this motherboard, it is necessary to install a

larger heatsink and cooling fan to dissipate heat. You also need to spray

thermal grease between the CPU and the heatsink to improve heat dis-

sipation. Make sure that the CPU and the heatsink are securely fastened

and in good contact with each other. Then connect the CPU fan to the

CPU FAN connector (CPU_FAN1, see Page 1, No. 3). For proper instal-

lation, please kindly refer to the instruction manuals of the CPU fan and

the heatsink.

16 17

English

FM2A75M-HD+

2.3 Installation of Memory Modules (DIMM)

This motherboard provides two 240-pin DDR3 (Double Data Rate 3) DIMM

slots, and supports Dual Channel Memory Technology.

e DIMM only ts in one correct orientation. It will cause permanent damage to the

motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation.

1. For dual channel conguration, you always need to install identical (the same brand,

speed, size and chip-type) DDR3 DIMM pairs.

2. It is unable to activate Dual Channel Memory Technology with only one memory module

installed.

3. It is not allowed to install a DDR or DDR2 memory module into a DDR3 slot; otherwise,

this motherboard and DIMM may be damaged.

18 19

English

1

2

3

18 19

English

FM2A75M-HD+

2.4 Expansion Slots (PCI and PCI Express Slots)

There are 1 PCI slot and 2 PCI Express slots on this motherboard.

PCI Slot: PCI slot is used to install expansion cards that have the 32-bit PCI

interface.

PCIE Slots:

PCIE1 (PCIe 3.0 x16 slot) is used for PCI Express x16 lane width

graphics cards

PCIE2 (PCIe 2.0 x1 slot) is used for PCI Express cards with x1 lane

width cards

Before installing an expansion card, please make sure that the power supply

is switched off or the power cord is unplugged. Please read the documenta-

tion of the expansion card and make necessary hardware settings for the card

before you start the installation.

ページを読み込んでいます...

ASROCK FM2A75M-HD+, FM2A75M-HD Quick Installation Manual

関連論文

その他の書類