Sony Walkman NW-A37HN ユーザーマニュアル

タイプ
ユーザーマニュアル
NW-A35/A35HN/A36HN/A37HN
©2016 Sony Corporation Printed in Malaysia
English
About the manuals
1. Instruction Manual (this manual)
2.
(Startup Guide)
The Startup Guide describes the following:
Basic operating instructions of your WALKMAN®
How to access useful PC applications websites on the internet
3. Help Guide (web document for a PC/smartphone)
The Help Guide contains more detailed operating
instructions, specifications and customer support
website URL, etc.
http://rd1.sony.net/help/dmp/nwa30/h_ww/
While browsing is free, you may be charged a
communication fee according to your carrier contract.
Depending on the country/region in which you have purchased your
Walkman, some models may not be available.
Notes for using Walkman
Note for battery
To prevent battery deterioration, charge the battery at least once every six
months.
Formatting a microSD card
Be sure to read the instructions for microSD cards in the Help Guide on
the Internet before you store content on a microSD card (not supplied).
Bluetooth capabilities
You can listen to music stored on your Walkman from Bluetooth audio
devices such as headphones or speakers.
Pairing (first time the device is used)
1. Set the Bluetooth audio device to pairing mode. (Refer to the
device’s instruction manual.)
2. Tap
- [
Settings] – [Connect to/Add Audio Device] under
[Bluetooth].
3. Tap the Bluetooth switch to turn on the Bluetooth function.
4. Tap [Add Device (Pairing)] to start paring.
5. Select the device from the paired device list to make the Bluetooth
connection.
After the Bluetooth connection is established, [Connected.] is
displayed.
Connecting (subsequent uses)
1. Turn on the paired Bluetooth audio device and set it to standby.
2. Tap
- [ Settings] – [Connect to/Add Audio Device] under
[Bluetooth].
3. Tap the Bluetooth switch to turn on the Bluetooth function.
4. Select the device from the paired device list to make the Bluetooth
connection.
Disconnecting
1. Tap
- [ Settings] – [Connect to/Add Audio Device] under
[Bluetooth].
2. Tap the connecting device name on the paired device list, and tap
[OK] on the disconnection dialog.
Turning the Bluetooth function on or off
1. Tap - [ Settings] – [Connect to/Add Audio Device] under
[Bluetooth].
2. Tap the Bluetooth switch to turn on or off.
Turning the NFC function on or off
1. Tap - [ Settings].
2. Tap [NFC] under [Bluetooth] and add or remove a check mark to turn
the NFC function on or off.
Symptom & Remedy
Your Walkman cannot charge the battery or is not recognized on
your computer.
The USB cable (supplied) is not connected to a USB connector
on your computer properly. Disconnect the USB cable, and then
reconnect it.
The charge lamp on the Walkman lights up in red while the battery is
charging, and goes off when the charging is completed.
When you use your Walkman for the first time, or if you have not
used the Walkman for a long time, it may take a few minutes to be
recognized by the computer. Check that the computer recognizes the
Walkman after you have connected it to the computer for about 10
minutes.
If the approaches listed above fail to resolve the issue, turn off
your computer completely and disconnect your Walkman. Then
disconnect the power cable, battery, and anything else connected
to the computer and discharge it for five minutes. After discharging,
turn on the computer again and reconnect the Walkman.
Compliance & Information
Information on laws and trademarks
For information on laws, regulations and trademark rights, refer to
“Important Information” contained in the supplied software. To read it,
install the supplied software on your computer.
To install it, open [WALKMAN] in your Walkman’s system storage after
connecting to your computer.
Windows user: [FOR_WINDOWS] - [Help_Guide_Installer(.exe)]
Mac user: [FOR_MAC] - [Help_Guide_Installer_for_mac]
After installing the software, double-click the shortcut or the alias icon
generated on your desktop.
About the in-ear headphones
The earbuds seal your ears. Therefore, be aware that there is a risk of
damage to your ears or eardrums if strong pressure is applied to the
earbuds or the earbuds are suddenly removed from your ears. After
use, be sure to take the earbuds off your ears gently.
About the headphones
Avoid playing the unit at so loud a volume that extended play might
affect your hearing.
At a high volume outside sounds may become inaudible. Avoid
listening to the unit in situations where hearing must not be
impaired, for example, while driving or cycling.
As the headphones are of open-air design, sounds go out through
the headphones. Remember not to disturb those close to you.
Design and specifications are subject to change without notice.
简体中文
使用产品前请仔细阅读本使用说明书,并请妥善
保管
关于手册
1.说明书手册(本手册)
2.
(入门指南)
入门指南描述下列内容:
您的WALKMAN®的基本使用说明
如何访问互联⽹上有用的电脑应用程序⽹站
3.
帮助指南
电脑
/
智能手机用⽹络文档
帮助指南包含更详细的使用说明、规格
和客户支持⽹站URL等。
http://rd1.sony.net/help/dmp/nwa30/h_ww/
虽然浏览是免费的,但根据您的运营商合同,您
可能会被收取通信费。
根据您购买Walkman的国家/地区的不同,可能不
提供某些型号。
4-593-954-41(1)
Instruction Manual
数码音频播放器
出版年月:2016/9
说明书手册
CS
请勿把本机安装在书橱或嵌入墙壁的机架内。
请勿将电池(安装的电池组或多个电池)长时间
暴露在直射阳光、火焰或类似的过热热源附近。
有关使用Walkman的注意事项
有关电池的注意事项
为防止电池性能降低,请每六个月对电池至少充
电一次。
格式化microSD卡
在microSD卡(不提供)上存储内容之前,请务必
阅读互联⽹上帮助指南中有关microSD卡的说明。
Bluetooth功能
可以从⽿机或扬声器等Bluetooth音频设备收听存
储在Walkman上的音乐。
配对(⾸次使用设备时)
1.将Bluetooth音频设备设置为配对模式。(参阅
设备的说明书手册。)
2.点击
-[ 设置]–[Bluetooth]下的[连
接到/添加音频设备]。
3.点击Bluetooth开关打开Bluetooth功能。
4.点击[添加设备(配对)]开始配对。
5.
从已配对设备列表中选择设备进行Bluetooth连接。
建立Bluetooth连接后,会显示[已连接。]。
连接(后续使用时)
1.打开已配对的Bluetooth音频设备并将其设为待
机状态。
2.点击
-[ 设置]–[Bluetooth]下的[连
接到/添加音频设备]。
3.点击Bluetooth开关打开Bluetooth功能。
4.
从已配对设备列表中选择设备进行Bluetooth连接。
断开连接
1.点击 -[ 设置]–[Bluetooth]下的[连
接到/添加音频设备]。
2.点击已配对设备列表上的连接设备名称,然后
点击断开连接对话框上的[确定]。
打开或关闭Bluetooth功能
1.点击
-[ 设置]–[Bluetooth]下的[连
接到/添加音频设备]。
2.点击Bluetooth开关以打开或关闭。
打开或关闭NFC功能
1.点击
-[ 设置]。
2.点击[Bluetooth]下的[NFC]并添加或移除
复选标记以打开或关闭NFC功能。
症状和纠正方法
Walkman无法对电池充电或被电脑识别。
USB连接线(提供)未正确连接到电脑的USB接
⼝。断开USB连接线,然后再重新连接。
电池充电期间Walkman上的充电指示灯以红色点
亮,当充电结束时熄灭。
首次使用Walkman时,或者长时间未使用Walkman
时,可能需要几分钟才能被电脑识别。查看
Walkman与电脑相连约10分钟后能否被电脑识别。
如果上述措施无法解决问题,请完全关闭电脑电源
并断开Walkman的连接。然后断开电源连接线、电
池和连接在电脑上的任何其他设备,令其放电5分
钟。放电后,再次打开电脑并重新连接Walkman。
合规性和信息
有关法律和商标的信息
有关法律、法规和商标权的信息,请参阅随附软
件中包含的“重要信息”。若要阅读该信息,请
在电脑上安装随附软件。
要安装时,将Walkman连接到电脑后,打开Walkman
的系统存储中的[WALKMAN]。
Windows用户:[FOR_WINDOWS]-[Help_Guide_
Installer(.exe)]
Mac用户:[FOR_MAC]-[Help_Guide_Installer_
for_mac]
安装软件后,双击桌面上生成的快捷方式或别名
图标。
关于入耳式耳机
⽿塞会封住您的⽿朵。因此请注意,如果对⽿塞
施加较强压力或从⽿中猛然取出⽿塞,则存在损
伤⽿朵或⽿膜的风险。使用后,请务必将⽿塞轻
轻地从⽿朵中取出。
额定电流800mA
锂电池用户不可自行更换,如电池损坏需要更
换,请联系专业人员。
也可以连接适用本型号的SonyUSB充电交流电源
适配器(另购)对电池进行充电。
关于耳机
避免以高音量播放设备,否则长时间播放可能会
影响听力。
室外使用高音量可能会听不见周围声音。在不得
影响听力的情况下,如开车或骑车时,请勿收听
设备。
由于⽿机是设计成可在户外使用的,声音会透过
⽿机传到外面来。请注意不要打扰周围的人。
无线功能
频率范围:2400-2483.5MHz
13.56MHz
发射功率:
≤20dBm(EIRP)
[2400
-2483.5MHz]
≤42dBμA/m(10米处场强,准
峰值)[13.56MHz]
不得擅自更改发射频率、加⼤发射功率(包括额
外加装射频功率放⼤器),不得擅自外接天线或改
用其它发射天线。
使用时不得对各种合法的无线电业务产生有害⼲
扰。一旦发现有⼲扰现象时,应立即停止使用,
并采取措施消除⼲扰后方可继续使用。
使用微功率无线电设备,必须忍受各种无线电业务
的⼲扰或⼯业、科学及医疗应用设备的辐射⼲扰。
不得在飞机和机场附近使用。
设计和规格如有变更,恕不另行通知。
中国⼤陆地区的用户
制造商:索尼公司
总经销商:索尼(中国)有限公司
地址:北京市朝阳区太阳宫中路12号楼冠城⼤厦701
原产地:马来西亚
  • Page 1 1
  • Page 2 2

Sony Walkman NW-A37HN ユーザーマニュアル

タイプ
ユーザーマニュアル

他の言語で