Dell Precision M4300 仕様

www.dell.com | support.dell.com

Dell Precision™ M4300

Quick Reference Guide

Model PP04X

Notes, Notices, and Cautions

NOTE: A NOTE indicates important information that helps you make better use of your computer.

NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.

CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.

Abbreviations and Acronyms

For a complete list of abbreviations and acronyms, see the Glossary in your online

User’s Guide

.

If you purchased a Dell™ n Series computer, any references in this document to Microsoft

®

Windows

®

operating systems are not applicable.

NOTE: Some features or media may be optional and may not ship with your computer. Some features or media may not

be available in certain countries.

____________________

Information in this document is subject to change without notice.

Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text: Dell, the DELL logo, Dell Precision, Wi-Fi Catcher, and ExpressCharge are trademarks of Dell Inc.; Intel is a

registered trademark of Intel Corporation; Windows Vista is a trademark and Microsoft and Windows are registered trademarks of

Microsoft Corporation.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products.

Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

Model PP04X

April 2007 P/N XP474 Rev. A00

Contents 3

Contents

Finding Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Setting Up Your Computer

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

About Your Computer

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Front View

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Left View

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Right View

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Back View

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Bottom View

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Using a Battery

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Battery Performance

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Checking the Battery Charge

. . . . . . . . . . . . . . . . . . . . . . . . 13

Conserving Battery Power

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Power Management Modes

. . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Standby Mode

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Hibernate Mode

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Configuring Power Management Settings

. . . . . . . . . . . . . . . . . . . 16

Charging the Battery

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Replacing the Battery

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Storing a Battery

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Troubleshooting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Lockups and Software Problems

. . . . . . . . . . . . . . . . . . . . . . 18

Dell Diagnostics

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

When to Use the Dell Diagnostics

. . . . . . . . . . . . . . . . . . . . . 19

Starting the Dell Diagnostics From Your Hard Drive

. . . . . . . . . . . . 20

Starting the Dell Diagnostics From the Drivers and Utilities Media

. . . . 20

Dell Diagnostics Main Menu

. . . . . . . . . . . . . . . . . . . . . . . . 21

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

4 Contents

Quick Reference Guide 5

Finding Information

NOTE: Some features or media may be optional and may not ship with your computer. Some features or media may

not be available in certain countries.

NOTE: Additional information may ship with your computer.

What Are You Looking For? Find It Here

• A diagnostic program for my computer

• Drivers for my computer

• My device documentation

• Notebook System Software (NSS)

Drivers and Utilities Media

NOTE: The Drivers and Utilities media may be optional and

may not ship with your computer.

Documentation and drivers are already installed on your

computer. You can use the media to reinstall drivers (see

"Reinstalling Drivers and Utilities" in your online User’s

Guide) or to run the Dell Diagnostics (see "Dell

Diagnostics" on page 19).

Readme files may be included

on your media to provide last-

minute updates about

technical changes to your

computer or advanced

technical-reference material

for technicians or experienced

users.

NOTE: Drivers and documentation updates can be found at

support.dell.com.

• Warranty information

• Terms and Conditions (U.S. only)

• Safety instructions

• Regulatory information

• Ergonomics information

• End User License Agreement

Dell™ Product Information Guide

• How to remove and replace parts

• Specifications

• How to configure system settings

• How to troubleshoot and solve problems

Dell™ Precision™ User’s Guide

Microsoft Windows Help and Support Center

1

Click

Start

or the Windows Vista

™

start button,

→

Help and Support

→

Dell User and System Guides

→

System Guides

.

2

Click the

User’s Guide

for your computer.

6 Quick Reference Guide

• Service Tag and Express Service Code

• Microsoft Windows License Label

Service Tag and Microsoft

®

Windows

®

License

These labels are located on your computer.

• Use the Service Tag to

identify your computer

when you use

support.dell.com

or

contact support.

• Enter the Express Service Code to direct your call when

contacting support.

NOTE: The Microsoft Windows License label has been

redesigned with a hole, or "security portal," as an increased

security measure.

• Solutions — Troubleshooting hints and tips, articles

from technicians, online courses, and frequently

asked questions

• Community — Online discussion with other Dell

customers

• Upgrades — Upgrade information for components,

such as memory, the hard drive, and the operating

system

• Customer Care — Contact information, service call

and order status, warranty, and repair information

• Service and support — Service call status and

support history, service contract, online discussions

with technical support

• Reference — Computer documentation, details on

my computer configuration, product specifications,

and white papers

• Downloads — Certified drivers, patches, and

software updates

• Notebook System Software (NSS) — If you reinstall

the operating system for your computer, you should

also reinstall the NSS utility. NSS provides critical

updates for your operating system and support for

Dell™ 3.5-inch USB floppy drives, Intel

®

processors,

optical drives, and USB devices. NSS is necessary for

correct operation of your Dell computer. The

software automatically detects your computer and

operating system and installs the updates appropriate

for your configuration.

Dell Support Website — support.dell.com

NOTE: Select your region or business segment to view the

appropriate support site.

To download Notebook System Software:

1

Go to

support.dell.com

, select your region or business

segment, and enter your Service Tag.

2

Select

Drivers & Downloads

and click

Go

.

3

Click your operating system and search for the keyword

Notebook System Software

.

NOTE: The support.dell.com user interface may vary

depending on your selections.

What Are You Looking For? Find It Here

Quick Reference Guide 7

• Software upgrades and troubleshooting hints —

Frequently asked questions, hot topics, and general

health of your computing environment

Dell Support Utility

The Dell Support Utility is an automated upgrade and

notification system installed on your computer. This

support provides real-time health scans of your computing

environment, software updates, and relevant self-support

information. Access the Dell Support Utility from the

icon in the taskbar. For more information, see "Dell Support

Utility" in your

User’s Guide

.

• How to use Windows

• How to work with programs and files

• How to personalize my desktop

Windows Help and Support Center

1

Click

Start

or

→

Help and Support

.

2

Type a word or phrase that describes your problem and

click the arrow icon.

3

Click the topic that describes your problem.

4

Follow the instructions on the screen.

• Information on network activity, the Power

Management Wizard, hotkeys, and other items

controlled by Dell QuickSet.

Dell QuickSet Help

To view

Dell QuickSet Help

,

right-click the QuickSet icon

in the Microsoft

®

Windows

®

taskbar.

For more information on Dell QuickSet, see "Dell™

QuickSet" in your online User’s Guide.

• How to reinstall my operating system

Operating System Media

NOTE: The Operating System media may be optional and may

not ship with your computer.

The operating system is already installed on your computer.

To reinstall your operating system, use the Operating

System media. See "Restoring Your Operating System" in

your online User’s Guide.

After you reinstall your

operating system, use the

optional Drivers and

Utilities media to reinstall

drivers for the devices that

came with your computer.

Your operating system

product key label is located

on your computer.

NOTE: The color of your CD or DVD varies based on the

operating system you ordered.

What Are You Looking For? Find It Here

8 Quick Reference Guide

Setting Up Your Computer

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the

Product Information Guide.

1

Unpack the accessories box.

2

Set aside the contents of the accessories box, which you will need to complete the setup of your computer.

The accessories box also contains user documentation and any software or additional hardware

(such as PC Cards, drives, or batteries) that you have ordered.

3

Connect the AC adapter to the AC adapter connector on the computer and to the electrical outlet.

4

Open the computer display and press the power button to turn on the computer (see "Front View" on

page 9).

NOTE: It is recommended that you turn on and shut down your computer at least once before you install any cards

or connect the computer to a docking device or other external device, such as a printer.

Quick Reference Guide 9

About Your Computer

Front View

1

display latch

2

display

3

power button

4

omni-directional microphone

5

device status lights

6

speakers (2)

7

keyboard

8

touch pad

9

fingerprint reader (optional)

10

touch pad/track stick buttons

11

track stick

12

keyboard status lights

13

volume control buttons

14

mute button

15

ambient light sensor

1

6

2

12

8

13

5

14

3

7

10

15

11

9

4

10 Quick Reference Guide

Left View

Right View

CAUTION: Do not block, push objects into, or allow dust to accumulate in the air vents. Do not store your

computer in a low-airflow environment, such as a closed briefcase, while it is running. Restricting the airflow

can damage the computer or cause a fire.

1

security cable slot

2

air vents

3

IEEE 1394 connector

4

audio connectors

5

ExpressCard slot

6

wireless switch

7

Wi-Fi Catcher™ light

8

PC Card slot

9

smart card slot

1

media bay

2

USB connectors (2)

1 2 3 4 65 7 8 9

1

2

Quick Reference Guide 11

Back View

Bottom View

CAUTION: Do not block, push objects into, or allow dust to accumulate in the air vents. Do not store your

computer in a low-airflow environment, such as a closed briefcase, while it is running. Restricting the airflow

can damage the computer or cause a fire.

1

network connector (RJ-45)

2

S-video TV-out connector

3

powered USB connector

4

modem connector (RJ-11)

5

serial connector

6

video connector

7

AC adapter connector

8

air vents

1

battery-bay latch release

2

battery

3

memory module cover

4

docking-device connector

5

fan air vents

6

hard drive

1 2 63 4 75 8

5

4

1

3

2

6

12 Quick Reference Guide

Using a Battery

Battery Performance

NOTE: For information about the Dell warranty for your computer, see the Product Information Guide or separate

paper warranty document that shipped with your computer.

For optimal computer performance and to help preserve BIOS settings, operate your Dell™ portable

computer with the main battery installed at all times. One battery is supplied as standard equipment in

the battery bay.

NOTE: Because the battery may not be fully charged, use the AC adapter to connect your new computer to an

electrical outlet the first time you use the computer. For best results, operate the computer with the AC adapter

until the battery is fully charged. To view battery charge status, access the Control Panel→ Power Options, and

then click the Power Meter tab.

NOTE: Battery operating time (the time the battery can hold a charge) decreases over time. Depending on how

often the battery is used and the conditions under which it is used, you may need to purchase a new battery during

the life of your computer.

Battery operating time varies depending on operating conditions. You can install an optional second

battery in the media bay to significantly increase operating time.

Operating time is significantly reduced when you perform operations including, but not limited to,

the following:

• Using optical drives

• Using wireless communications devices, PC Cards, ExpressCards, media memory cards, or USB devices

• Using high-brightness display settings, 3D screen savers, or other power-intensive programs such as 3D games

• Running the computer in maximum performance mode (see "Configuring Power Management

Settings" on page 16)

NOTE: It is recommended that you connect your computer to an electrical outlet when writing to a CD or DVD.

You can check the battery charge before you insert the battery into the computer (see "Checking the

Battery Charge" on page 13). You can also set power management options to alert you when the battery

charge is low (see "Configuring Power Management Settings" on page 16).

CAUTION: Using an incompatible battery may increase the risk of fire or explosion. Replace the battery only

with a compatible battery purchased from Dell. The lithium ion battery is designed to work with your Dell

computer. Do not use a battery from other computers with your computer.

CAUTION: Do not dispose of batteries with household waste. When your battery no longer holds a charge, call

your local waste disposal or environmental agency for advice on disposing of a lithium-ion battery. See "Battery

Disposal" in the Product Information Guide.

CAUTION: Misuse of the battery may increase the risk of fire or chemical burn. Do not puncture, incinerate,

disassemble, or expose the battery to temperatures above 65°C (149°F). Keep the battery away from children.

Handle damaged or leaking batteries with extreme care. Damaged batteries may leak and cause personal injury

or equipment damage.

Quick Reference Guide 13

Checking the Battery Charge

The Dell QuickSet Battery Meter, the Microsoft Windows Power Meter window and icon, the

battery charge gauge and health gauge, and the low-battery warning provide information on the battery

charge.

Dell™ QuickSet Battery Meter

If Dell QuickSet is installed, press <Fn><F3> to display the QuickSet Battery Meter. The Battery Meter

displays status, battery health, charge level, and charge completion time for the battery in your computer.

For more information about QuickSet, click the QuickSet icon in the Microsoft

®

Windows

®

taskbar,

and click Help.

Microsoft

®

Windows

®

Power Meter

The Windows Power Meter indicates the remaining battery charge. To check the Power Meter, double-click

the icon on the taskbar.

If the computer is connected to an electrical outlet, a icon appears.

Charge Gauge

By either pressing once or pressing and holding the status button on the charge gauge on the battery, you

can check:

• Battery charge (check by pressing and

releasing

the status button)

• Battery health (check by pressing and

holding

the status button)

The battery operating time is largely determined by the number of times it is charged. After hundreds of

charge and discharge cycles, batteries lose some charge capacity—or battery health. That is, a battery can

show a status of "charged" but maintain a reduced charge capacity (health).

Check the Battery Charge

To check the battery charge, press and release the status button on the battery charge gauge to illuminate

the charge-level lights. Each light represents approximately 20 percent of the total battery charge.

For example, if the battery has 80 percent of its charge remaining, four of the lights are on. If no lights

appear, the battery has no charge.

Check the Battery Health

NOTE: You can check battery health in one of two ways: by using the charge gauge on the battery as described

below and by using the Battery Meter in Dell QuickSet. For information about QuickSet, right-click the QuickSet

icon in the Microsoft

®

Windows

®

taskbar, and click Help.

14 Quick Reference Guide

To check the battery health using the charge gauge, press and hold the status button on the battery charge

gauge for at least 3 seconds. If no lights appear, the battery is in good condition, and more than 80 percent of

its original charge capacity remains. Each light represents incremental degradation. If five lights appear, less

than 60 percent of the charge capacity remains, and you should consider replacing the battery. See

"Specifications" in your online User’s Guide for more information about the battery operating time.

Low-Battery Warning

NOTICE: To avoid losing or corrupting data, save your work immediately after a low-battery warning. Then connect

the computer to an electrical outlet. If the battery runs completely out of power, hibernate mode begins automatically.

By default, a pop-up window warns you when the battery charge is approximately 90 percent depleted.

You can change the settings for the battery alarms in QuickSet or the Power Options Properties window.

See "Configuring Power Management Settings" on page 16 for information about accessing QuickSet or

the Power Options Properties window.

Conserving Battery Power

Perform the following actions to conserve battery power:

• Connect the computer to an electrical outlet when possible because battery life is largely determined

by the number of times the battery is used and recharged.

• Place the computer in standby mode or hibernate mode when you leave the computer unattended for

long periods of time (see "Power Management Modes" on page 14).

• Use the Power Management Wizard

to select options to optimize your computer’s power usage. These

options can also be set to change when you press the power button, close the display, or press <Fn><Esc>.

NOTE: See "Power Management Modes" on page 14 for more information on conserving battery power.

Power Management Modes

Standby Mode

Standby mode conserves power by turning off the display and the hard drive after a predetermined

period of inactivity (a time-out). When the computer exits standby mode, it returns to the same

operating state it was in before entering standby mode.

NOTICE: If your computer loses AC and battery power while in standby mode, it may lose data.

To enter standby mode:

• Click

Start

or

→

Shut Down

→

Stand by

.

or

Quick Reference Guide 15

• Depending on how you set the power management options in the

Power Options Properties

window

or the QuickSet Power Management Wizard, use one of the following methods:

– Press the power button.

– Close the display.

– Press <Fn><Esc>.

To exit standby mode, press the power button or open the display depending on how you set the power

management options. You cannot make the computer exit standby mode by pressing a key or touching

the touch pad or track stick.

Hibernate Mode

Hibernate mode conserves power by copying system data to a reserved area on the hard drive and then

completely turning off the computer. When the computer exits hibernate mode, it returns to the same

operating state it was in before entering hibernate mode.

NOTICE: You cannot remove devices or undock your computer while your computer is in hibernate mode.

Your computer enters hibernate mode if the battery charge level becomes critically low.

To manually enter hibernate mode:

• Click

Start

or

→

Turn off computer

, press and hold <Shift>, and then click

Hibernate

.

or

• Depending on how you set the power management options in the

Power Options Properties

window

or the QuickSet Power Management Wizard, use one of the following methods to enter hibernate

mode:

– Press the power button.

– Close the display.

– Press <Fn><Esc>.

NOTE: Some PC Cards or ExpressCards may not operate correctly after the computer exits hibernate mode.

Remove and reinsert the card (see "Installing a PC Card or Express Card" in your online User’s Guide), or simply

restart (reboot) your computer.

To exit hibernate mode, press the power button. The computer may take a short time to exit hibernate

mode. You cannot make the computer exit hibernate mode by pressing a key or touching the touch pad

or track stick. For more information on hibernate mode, see the documentation that came with your

operating system.

16 Quick Reference Guide

Configuring Power Management Settings

You can use the QuickSet Power Management Wizard or Windows Power Options Properties to

configure the power management settings on your computer.

• To access the QuickSet Power Management Wizard, double-click the

QuickSet icon in the

Microsoft

®

Windows

®

taskbar

. For more information about QuickSet, click the

Help

button in the

Power Management Wizard.

• To access the

Power Options Properties

window, click

Start

or

→

Control Panel

→

Performance

and Maintenance

→

Power Options

. For information on any field in the

Power Options Properties

window, click the question mark icon on the title bar and then click on the area where you need

information.

Charging the Battery

NOTE: With Dell™ ExpressCharge™, when the computer is turned off, the AC adapter charges a completely

discharged battery to 80 percent in about 1 hour and to 100 percent in approximately 2 hours. Charge time is longer

with the computer turned on. You can leave the battery in the computer for as long as you like. The battery’s internal

circuitry prevents the battery from overcharging.

When you connect the computer to an electrical outlet or install a battery while the computer is

connected to an electrical outlet, the computer checks the battery charge and temperature. If necessary,

the AC adapter then charges the battery and maintains the battery charge.

If the battery is hot from being used in your computer or being in a hot environment, the battery may

not charge when you connect the computer to an electrical outlet.

The battery is too hot to start charging if the light flashes alternately green and orange. Disconnect

the computer from the electrical outlet and allow the computer and the battery to cool to room

temperature. Then connect the computer to an electrical outlet to continue charging the battery.

For more information about resolving problems with a battery, see "Power Problems" in your online

User’s Guide.

Replacing the Battery

CAUTION: Before performing these procedures, turn off the computer, disconnect the AC adapter from the

electrical outlet and the computer, disconnect the modem from the wall connector and computer, and remove any

other external cables from the computer.

CAUTION: Using an incompatible battery may increase the risk of fire or explosion. Replace the battery only

with a compatible battery purchased from Dell. The battery is designed to work with your Dell™ computer. Do not

use a battery from other computers with your computer.

NOTICE: You must remove all external cables from the computer to avoid possible connector damage.

For information about replacing the second battery, which is located in the media bay, see "Using

Multimedia" in your online User’s Guide.

Quick Reference Guide 17

To remove the battery:

1

If the computer is connected to a docking device (docked), undock it. See the documentation that

came with your docking device for instructions.

2

Ensure that the computer is turned off.

3

Slide the battery-bay latch release on the bottom of the computer until the release clicks.

4

Using the tab on the battery, lift the battery out of the computer.

To replace the battery, place the battery in the bay and press down until the battery-bay latch

release clicks.

Storing a Battery

Remove the battery when you store your computer for an extended period of time. A battery discharges

during prolonged storage. After a long storage period, recharge the battery fully before you use it (see

"Charging the Battery" on page 16).

1 battery tab 2 battery 3 battery-bay latch release

2

3

1

18 Quick Reference Guide

Troubleshooting

Lockups and Software Problems

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the

Product Information Guide.

The computer does not start up

ENSURE THAT THE AC ADAPTER IS FIRMLY CONNECTED TO THE COMPUTER AND TO THE ELECTRICAL OUTLET.

The computer stops responding

NOTICE: You might lose data if you are unable to perform an operating system shutdown.

T

URN THE COMPUTER OFF — If you are unable to get a response by pressing a key on your keyboard or moving your

mouse, press and hold the power button for at least 8 to 10 seconds until the computer turns off. Then restart your

computer.

A program stops responding or crashes repeatedly

NOTE: Software usually includes installation instructions in its documentation or on a floppy disk, CD, or DVD.

E

ND THE PROGRAM —

1

Press <Ctrl><Shift><Esc> simultaneously.

2

Click

Task Manager

.

3

Click

Applications

.

4

Click the program that is no longer responding.

5

Click

End Task

.

CHECK THE SOFTWARE DOCUMENTATION — If necessary, uninstall and then reinstall the program.

A program is designed for an earlier Microsoft

®

Windows

®

operating system

RUN THE PROGRAM COMPATIBILITY WIZARD — The Program Compatibility Wizard configures a program so it

runs in an environment similar to non-Windows XP operating system environments.

1

Click

Start

→

All Programs

→

Accessories

→

Program Compatibility Wizard

→

2

Follow the instructions on the screen.

A solid blue screen appears

TURN THE COMPUTER OFF — If you are unable to get a response by pressing a key on your keyboard or moving your

mouse, press and hold the power button for at least 8 to 10 seconds until the computer turns off. Then restart your

computer.

Quick Reference Guide 19

Other software problems

CHECK THE SOFTWARE DOCUMENTATION OR CONTACT THE SOFTWARE MANUFACTURER FOR TROUBLESHOOTING

INFORMATION —

• Ensure that the program is compatible with the operating system installed on your computer.

• Ensure that your computer meets the minimum hardware requirements needed to run the software.

See the software documentation for information.

• Ensure that the program is installed and configured properly.

• Verify that the device drivers do not conflict with the program.

• If necessary, uninstall and then reinstall the program.

BACK UP YOUR FILES IMMEDIATELY

USE A VIRUS-SCANNING PROGRAM TO CHECK THE HARD DRIVE, FLOPPY DISKS, CDS , AND DVDS

SAVE AND CLOSE ANY OPEN FILES OR PROGRAMS AND SHUT DOWN YOUR COMPUTER THROUGH THE Start MENU

SCAN THE COMPUTER FOR SPYWARE — If you are experiencing slow computer performance, you frequently receive

pop-up advertisements, or you are having problems connecting to the Internet, your computer might be infected

with spyware. Use an anti-virus program that includes anti-spyware protection (your program may require an

upgrade) to scan the computer and remove spyware. For more information, go to support.dell.com and search for

the keyword spyware.

R

UN THE DELL DIAGNOSTICS — See "Dell Diagnostics" on page 19. If all tests run successfully, the error condition

is related to a software problem.

Dell Diagnostics

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the

Product Information Guide.

When to Use the Dell Diagnostics

If you experience a problem with your computer, run the Dell Diagnostics before you contact Dell for

technical assistance.

It is recommended that you print these procedures before you begin.

NOTICE: The Dell Diagnostics works only on Dell™ computers.

NOTE: The Drivers and Utilities media is optional and may not ship with your computer.

Enter the system setup program, review your computer’s configuration information, and ensure that the

device you want to test displays in the system setup program and is active.

Start the Dell Diagnostics from your hard drive or from the Drivers and Utilities media.

20 Quick Reference Guide

Starting the Dell Diagnostics From Your Hard Drive

The Dell Diagnostics is located on a hidden diagnostic utility partition on your hard drive.

NOTE: If your computer cannot display a screen image, contact Dell (see "Contacting Dell" in your online User’s Guide

for details).

NOTE: If the computer is connected to a docking device (docked), undock it. See the documentation that came

with your docking device for instructions.

1

Ensure that the computer is connected to an electrical outlet that is known to be working properly.

2

Turn on (or restart) your computer.

3

Start the Dell Diagnostics in one of the following two ways:

• When the DELL™ logo appears, press <F12> immediately. Select Diagnostics from the boot

menu and press <Enter>.

NOTE: If you wait too long and the operating system logo appears, continue to wait until you see the

Microsoft

®

Windows

®

desktop; then, shut down your computer and try again.

• Ensure that the computer is powered down completely. Press and hold the <Fn> key while

powering the computer on.

NOTE: If you see a message stating that no diagnostics utility partition has been found, run the Dell

Diagnostics from the Drivers and Utilities media.

The computer runs the Pre-boot System Assessment (PSA), a series of initial tests of your system

board, keyboard, display, memory, hard drive, etc.

• During the assessment, answer any questions that appear.

• If failures are detected during the Pre-boot System Assessment, write down the error code(s)

and see "Contacting Dell" in your online

User’s Guide

.

If the Pre-boot System Assessment completes successfully, you will receive the message,

"

Booting Dell Diagnostic Utility Partition

.

Press any key to

continue"

.

4

Press any key to start the Dell Diagnostics from the diagnostics utility partition on your hard drive.

Starting the Dell Diagnostics From the Drivers and Utilities Media

1

Insert the

Drivers and Utilities

media.

2

Shut down and restart the computer.

When the DELL logo appears, press <F12> immediately.

NOTE: If you wait too long and the operating system logo appears, continue to wait until you see the

Microsoft

®

Windows

®

desktop; then, shut down your computer and try again.

NOTE: The next steps change the boot sequence for one time only. On the next start-up, the computer boots

according to the devices specified in the system setup program.

3

When the boot device list appears, highlight

CD/DVD/CD-RW

and press <Enter>.

ページを読み込んでいます...

Dell Precision M4300 仕様

Dell Precision M4300 仕様

関連論文