If the Stand Wobbles
To prevent the stand from wobbling, proceed
as follows.
* If there is a keyboard on the stand, remove
it from the stand before you proceed.
1. Using the included Allen wrench,
loosen all eight screws
E
.
* Do not remove the screws.
2. Simultaneously press the locations
indicated by arrows (1).
3. Simultaneously press the locations
indicated by arrows (2).
Verify that the stand no longer wobbles.
4. Re-tighten all eight screws
E
.
Copyright © 2013 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in
any form without the written permission of ROLAND CORPORATION.
KS-12
-
1
