Dell Latitude D830 クイックスタートガイド

www.dell.com | support.dell.com

Dell™ Latitude™ D830

Quick Reference Guide

Model PP04X

Notes, Notices, and Cautions

NOTE: A NOTE indicates important information that helps you make better use of your computer.

NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.

CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.

Abbreviations and Acronyms

For a complete list of abbreviations and acronyms, see the Glossary in your online

User’s Guide

.

If you purchased a Dell™ n Series computer, any references in this document to Microsoft

®

Windows

®

operating systems are not applicable.

NOTE: Some features or media may be optional and may not ship with your computer. Some features or media may not

be available in certain countries.

____________________

Information in this document is subject to change without notice.

Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text: Dell, the DELL logo, Latitude, and ExpressCharge are trademarks of Dell Inc.; Intel is a registered trademark of

Intel Corporation; Microsoft and Windows are registered trademarks of Microsoft Corporation.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products.

Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

Model PP04X

April 2007 P/N HM307 Rev. A00

Contents 3

Contents

Finding Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Setting Up Your Computer

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

About Your Computer

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Front View

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Left View

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Right View

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Back View

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Bottom View

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Using a Battery

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Battery Performance

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Checking the Battery Charge

. . . . . . . . . . . . . . . . . . . . . . . . 14

Conserving Battery Power

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Power Management Modes

. . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Standby Mode

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Hibernate Mode

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Configuring Power Management Settings

. . . . . . . . . . . . . . . . . . . 17

Charging the Battery

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Replacing the Battery

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Storing a Battery

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Troubleshooting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Lockups and Software Problems

. . . . . . . . . . . . . . . . . . . . . . 19

Dell Diagnostics

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

When to Use the Dell Diagnostics

. . . . . . . . . . . . . . . . . . . . . 20

Starting the Dell Diagnostics From Your Hard Drive

. . . . . . . . . . . . 21

Starting the Dell Diagnostics From the Drivers and Utilities Media

. . . . 21

Dell Diagnostics Main Menu

. . . . . . . . . . . . . . . . . . . . . . . . 22

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

4 Contents

Quick Reference Guide 5

Finding Information

NOTE: Some features or media may be optional and may not ship with your computer. Some features or media may

not be available in certain countries.

NOTE: Additional information may ship with your computer.

What Are You Looking For? Find It Here

• A diagnostic program for my computer

• Drivers for my computer

• My device documentation

• Notebook System Software (NSS)

Drivers and Utilities Media

NOTE: The Drivers and Utilities media may be optional and

may not ship with your computer.

Documentation and drivers are already installed on your

computer. You can use the media to reinstall drivers (see

"Reinstalling Drivers and Utilities" in your online User’s

Guide) or to run the Dell Diagnostics (see "Dell

Diagnostics" on page 20).

Readme files may be

included on your media to

provide last-minute

updates about technical

changes to your computer

or advanced technical-

reference material for

technicians or experienced

users.

NOTE: Drivers and documentation updates can be found at

support.dell.com.

• Warranty information

• Terms and Conditions (U.S. only)

• Safety instructions

• Regulatory information

• Ergonomics information

• End User License Agreement

Dell™ Product Information Guide

6 Quick Reference Guide

• How to remove and replace parts

• Specifications

• How to configure system settings

• How to troubleshoot and solve problems

Dell™ Latitude™ User’s Guide

Microsoft Windows Help and Support Center

1

Click

Start

or

→

Help and Support

→

Dell User and

System Guides

→

System Guides

.

2

Click the

User’s Guide

for your computer.

• Service Tag and Express Service Code

• Microsoft Windows License Label

Service Tag and Microsoft

®

Windows

®

License

These labels are located on your computer.

• Use the Service Tag to identify your computer when you

use

support.dell.com

or contact support.

• Enter the Express

Service Code to direct

your call when

contacting support.

NOTE: The Microsoft Windows License label has been

redesigned with a hole, or "security portal," as an increased

security measure.

What Are You Looking For? Find It Here

Quick Reference Guide 7

• Solutions — Troubleshooting hints and tips, articles

from technicians, online courses, and frequently

asked questions

• Community — Online discussion with other Dell

customers

• Upgrades — Upgrade information for components,

such as memory, the hard drive, and the operating

system

• Customer Care — Contact information, service call

and order status, warranty, and repair information

• Service and support — Service call status and support

history, service contract, online discussions with

technical support

• Reference — Computer documentation, details on

my computer configuration, product specifications,

and white papers

• Downloads — Certified drivers, patches, and software

updates

• Notebook System Software (NSS) — If you reinstall

the operating system for your computer, you should

also reinstall the NSS utility. NSS provides critical

updates for your operating system and support for

Dell™ 3.5-inch USB floppy drives, Intel

®

processors,

optical drives, and USB devices. NSS is necessary for

correct operation of your Dell computer. The software

automatically detects your computer and operating

system and installs the updates appropriate for your

configuration.

Dell Support Website — support.dell.com

NOTE: Select your region or business segment to view the

appropriate support site.

To download Notebook System Software:

1

Go to

support.dell.com

, select your region or business

segment, and enter your Service Tag.

2

Select

Drivers & Downloads

and click

Go

.

3

Click your operating system and search for the keyword

Notebook System Software

.

NOTE: The support.dell.com user interface may vary

depending on your selections.

• Software upgrades and troubleshooting hints —

Frequently asked questions, hot topics, and general

health of your computing environment

Dell Support Utility

The Dell Support Utility is an automated upgrade and

notification system installed on your computer. This

support provides real-time health scans of your computing

environment, software updates, and relevant self-support

information. Access the Dell Support Utility from the

icon in the taskbar. For more information, see "Dell Support

Utility" in your

User’s Guide

.

• How to use Windows XP

• How to work with programs and files

• How to personalize my desktop

Windows Help and Support Center

1

Click

Start

or

→

Help and Support

.

2

Type a word or phrase that describes your problem and

click the arrow icon.

3

Click the topic that describes your problem.

4

Follow the instructions on the screen.

What Are You Looking For? Find It Here

8 Quick Reference Guide

• Information on network activity, the Power

Management Wizard, hotkeys, and other items

controlled by Dell QuickSet.

Dell QuickSet Help

To view

Dell QuickSet Help

,

right-click the QuickSet icon

in the Microsoft

®

Windows

®

taskbar.

For more information on Dell QuickSet, see "Dell™

QuickSet" in your online User’s Guide.

• How to reinstall my operating system

Operating System Media

NOTE: The Operating System media may be optional and may

not ship with your computer.

The operating system is already installed on your computer.

To reinstall your operating system, use the Operating

System media. See "Restoring Your Operating System" in

your online User’s Guide.

After you reinstall your

operating system, use the

optional Drivers and

Utilities media to reinstall

drivers for the devices that

came with your computer.

Your operating system

product key label is located

on your computer.

NOTE: The color of your CD or DVD varies based on the

operating system you ordered.

What Are You Looking For? Find It Here

Quick Reference Guide 9

Setting Up Your Computer

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the

Product Information Guide.

1

Unpack the accessories box.

2

Set aside the contents of the accessories box, which you will need to complete the setup of your computer.

The accessories box also contains user documentation and any software or additional hardware

(such as PC Cards, drives, or batteries) that you have ordered.

3

Connect the AC adapter to the AC adapter connector on the computer and to the electrical outlet.

4

Open the computer display and press the power button to turn on the computer (see "Front View" on

page 10).

NOTE: It is recommended that you turn on and shut down your computer at least once before you install any cards

or connect the computer to a docking device or other external device, such as a printer.

10 Quick Reference Guide

About Your Computer

Front View

1

display latch

2

display

3

power button

4

device status lights

5

speakers (2)

6

keyboard

7

touch pad

8

touch pad/track stick buttons

9

track stick

10

keyboard status lights

11

volume control buttons

12

mute button

13

ambient light sensor

1

5

2

10

7

11

4

12

3

6

8

13

9

Quick Reference Guide 11

Left View

Right View

CAUTION: Do not block, push objects into, or allow dust to accumulate in the air vents. Do not store your

computer in a low-airflow environment, such as a closed briefcase, while it is running. Restricting the airflow

can damage the computer or cause a fire.

1

security cable slot

2

air vents

3

IEEE 1394 connector

4

audio connectors

5

ExpressCard slot

6

wireless switch

7

Wi-Fi Catcher™ light

8

PC Card slot

9

smart card slot

1

media bay

2

USB connectors (2)

1 2 3 4 65 7 8 9

1

2

12 Quick Reference Guide

Back View

Bottom View

CAUTION: Do not block, push objects into, or allow dust to accumulate in the air vents. Do not store your

computer in a low-airflow environment, such as a closed briefcase, while it is running. Restricting the airflow

can damage the computer or cause a fire.

1

network connector (RJ-45)

2

S-video TV-out connector

3

powered USB connector

4

modem connector (RJ-11)

5

serial connector

6

video connector

7

AC adapter connector

8

air vents

1

battery-bay latch release

2

battery

3

memory module cover

4

docking-device connector

5

fan air vents

6

hard drive

1 2 63 4 75 8

5

4

1

3

2

6

Quick Reference Guide 13

Using a Battery

Battery Performance

NOTE: For information about the Dell warranty for your computer, see the Product Information Guide or separate

paper warranty document that shipped with your computer.

For optimal computer performance and to help preserve BIOS settings, operate your Dell™ portable

computer with the main battery installed at all times. One battery is supplied as standard equipment in

the battery bay.

NOTE: Because the battery may not be fully charged, use the AC adapter to connect your new computer to an

electrical outlet the first time you use the computer. For best results, operate the computer with the AC adapter

until the battery is fully charged. To view battery charge status, access the Control Panel

→

Power Options, and

then click the Power Meter tab.

NOTE: Battery operating time (the time the battery can hold a charge) decreases over time. Depending on how

often the battery is used and the conditions under which it is used, you may need to purchase a new battery during

the life of your computer.

Battery operating time varies depending on operating conditions. You can install an optional second

battery in the media bay to significantly increase operating time.

Operating time is significantly reduced when you perform operations including, but not limited to,

the following:

• Using optical drives

• Using wireless communications devices, PC Cards, ExpressCards, media memory cards, or USB devices

• Using high-brightness display settings, 3D screen savers, or other power-intensive programs such as

3D games

• Running the computer in maximum performance mode (see "Configuring Power Management

Settings" on page 17)

NOTE: It is recommended that you connect your computer to an electrical outlet when writing to a CD or DVD.

You can check the battery charge before you insert the battery into the computer (see "Checking the

Battery Charge" on page 14). You can also set power management options to alert you when the battery

charge is low (see "Configuring Power Management Settings" on page 17).

CAUTION: Using an incompatible battery may increase the risk of fire or explosion. Replace the battery only

with a compatible battery purchased from Dell. The lithium ion battery is designed to work with your Dell

computer. Do not use a battery from other computers with your computer.

CAUTION: Do not dispose of batteries with household waste. When your battery no longer holds a charge, call

your local waste disposal or environmental agency for advice on disposing of a lithium-ion battery. See "Battery

Disposal" in the Product Information Guide.

CAUTION: Misuse of the battery may increase the risk of fire or chemical burn. Do not puncture, incinerate,

disassemble, or expose the battery to temperatures above 65°C (149°F). Keep the battery away from children.

Handle damaged or leaking batteries with extreme care. Damaged batteries may leak and cause personal injury

or equipment damage.

14 Quick Reference Guide

Checking the Battery Charge

The Dell QuickSet Battery Meter, the Microsoft Windows Power Meter window and icon, the battery

charge gauge and health gauge, and the low-battery warning provide information on the battery charge.

Dell™ QuickSet Battery Meter

If Dell QuickSet is installed, press <Fn><F3> to display the QuickSet Battery Meter. The Battery Meter

displays status, battery health, charge level, and charge completion time for the battery in your computer.

For more information about QuickSet, click the QuickSet icon in the Microsoft

®

Windows

®

taskbar,

and click Help.

Microsoft

®

Windows

®

Power Meter

The Windows Power Meter indicates the remaining battery charge. To check the Power Meter, double-

click the icon on the taskbar.

If the computer is connected to an electrical outlet, a icon appears.

Charge Gauge

By either pressing once or pressing and holding the status button on the charge gauge on the battery, you

can check:

• Battery charge (check by pressing and

releasing

the status button)

• Battery health (check by pressing and

holding

the status button)

The battery operating time is largely determined by the number of times it is charged. After hundreds of

charge and discharge cycles, batteries lose some charge capacity—or battery health. That is, a battery can

show a status of "charged" but maintain a reduced charge capacity (health).

Check the Battery Charge

To check the battery charge, press and release the status button on the battery charge gauge to illuminate

the charge-level lights. Each light represents approximately 20 percent of the total battery charge. For

example, if the battery has 80 percent of its charge remaining, four of the lights are on. If no lights

appear, the battery has no charge.

Quick Reference Guide 15

Check the Battery Health

NOTE: You can check battery health in one of two ways: by using the charge gauge on the battery as described

below and by using the Battery Meter in Dell QuickSet. For information about QuickSet, right-click the QuickSet

icon in the Microsoft

®

Windows

®

taskbar, and click Help.

To check the battery health using the charge gauge, press and hold the status button on the battery

charge gauge for at least 3 seconds. If no lights appear, the battery is in good condition, and more than

80 percent of its original charge capacity remains. Each light represents incremental degradation. If

five lights appear, less than 60 percent of the charge capacity remains, and you should consider replacing

the battery. See "Specifications" in your online User’s Guide for more information about the battery

operating time.

Low-Battery Warning

NOTICE: To avoid losing or corrupting data, save your work immediately after a low-battery warning. Then

connect the computer to an electrical outlet. If the battery runs completely out of power, hibernate mode begins

automatically.

By default, a pop-up window warns you when the battery charge is approximately 90 percent depleted.

You can change the settings for the battery alarms in QuickSet or the Power Options Properties window.

See "Configuring Power Management Settings" on page 17 for information about accessing QuickSet or

the Power Options Properties window.

Conserving Battery Power

Perform the following actions to conserve battery power:

• Connect the computer to an electrical outlet when possible because battery life is largely determined

by the number of times the battery is used and recharged.

• Place the computer in standby mode or hibernate mode when you leave the computer unattended for

long periods of time (see "Power Management Modes" on page 15).

• Use the Power Management Wizard

to select options to optimize your computer’s power usage.

These options can also be set to change when you press the power button, close the display, or

press <Fn><Esc>.

NOTE: See "Power Management Modes" on page 15 for more information on conserving battery power.

Power Management Modes

Standby Mode

Standby mode conserves power by turning off the display and the hard drive after a predetermined

period of inactivity (a time-out). When the computer exits standby mode, it returns to the same

operating state it was in before entering standby mode.

NOTICE: If your computer loses AC and battery power while in standby mode, it may lose data.

16 Quick Reference Guide

To enter standby mode:

• Click

Start

or

→

Shut Down

→

Stand by

.

or

• Depending on how you set the power management options in the

Power Options Properties

window

or the QuickSet Power Management Wizard, use one of the following methods:

– Press the power button.

– Close the display.

– Press <Fn><Esc>.

To exit standby mode, press the power button or open the display depending on how you set the power

management options. You cannot make the computer exit standby mode by pressing a key or touching

the touch pad or track stick.

Hibernate Mode

Hibernate mode conserves power by copying system data to a reserved area on the hard drive and then

completely turning off the computer. When the computer exits hibernate mode, it returns to the same

operating state it was in before entering hibernate mode.

NOTICE: You cannot remove devices or undock your computer while your computer is in hibernate mode.

Your computer enters hibernate mode if the battery charge level becomes critically low.

To manually enter hibernate mode:

• Click

Start

or

→

Turn off computer

, press and hold <Shift>, and then click

Hibernate

.

or

• Depending on how you set the power management options in the

Power Options Properties

window or

the QuickSet Power Management Wizard, use one of the following methods to enter hibernate mode:

– Press the power button.

– Close the display.

– Press <Fn><Esc>.

NOTE: Some PC Cards or ExpressCards may not operate correctly after the computer exits hibernate mode.

Remove and reinsert the card (see "Installing a PC Card or Express Card" in your online User’s Guide), or simply

restart (reboot) your computer.

To exit hibernate mode, press the power button. The computer may take a short time to exit hibernate

mode. You cannot make the computer exit hibernate mode by pressing a key or touching the touch pad

or track stick. For more information on hibernate mode, see the documentation that came with your

operating system.

Quick Reference Guide 17

Configuring Power Management Settings

You can use the QuickSet Power Management Wizard or Windows Power Options Properties to

configure the power management settings on your computer.

• To access the QuickSet Power Management Wizard, double-click the

QuickSet icon in the

Microsoft

®

Windows

®

taskbar

. For more information about QuickSet, click the

Help

button in the

Power Management Wizard.

• To access the

Power Options Properties

window, click

Start

or

→

Control Panel

→

Performance

and Maintenance

→

Power Options

. For information on any field in the

Power Options Properties

window, click the question mark icon on the title bar and then click on the area where you need

information.

Charging the Battery

NOTE: With Dell™ ExpressCharge™, when the computer is turned off, the AC adapter charges a completely

discharged battery to 80 percent in about 1 hour and to 100 percent in approximately 2 hours. Charge time is longer

with the computer turned on. You can leave the battery in the computer for as long as you like. The battery’s internal

circuitry prevents the battery from overcharging.

When you connect the computer to an electrical outlet or install a battery while the computer is

connected to an electrical outlet, the computer checks the battery charge and temperature. If necessary,

the AC adapter then charges the battery and maintains the battery charge.

If the battery is hot from being used in your computer or being in a hot environment, the battery may

not charge when you connect the computer to an electrical outlet.

The battery is too hot to start charging if the light flashes alternately green and orange. Disconnect

the computer from the electrical outlet and allow the computer and the battery to cool to room

temperature. Then connect the computer to an electrical outlet to continue charging the battery.

For more information about resolving problems with a battery, see "Power Problems" in your online

User’s Guide.

Replacing the Battery

CAUTION: Before performing these procedures, turn off the computer, disconnect the AC adapter from the

electrical outlet and the computer, disconnect the modem from the wall connector and computer, and remove any

other external cables from the computer.

CAUTION: Using an incompatible battery may increase the risk of fire or explosion. Replace the battery only

with a compatible battery purchased from Dell. The battery is designed to work with your Dell™ computer. Do not

use a battery from other computers with your computer.

NOTICE: You must remove all external cables from the computer to avoid possible connector damage.

For information about replacing the second battery, which is located in the media bay, see "Using

Multimedia" in your online User’s Guide.

18 Quick Reference Guide

To remove the battery:

1

If the computer is connected to a docking device (docked), undock it. See the documentation that

came with your docking device for instructions.

2

Ensure that the computer is turned off.

3

Slide the battery-bay latch release on the bottom of the computer until the release clicks.

4

Using the tab on the battery, lift the battery out of the computer.

To replace the battery, place the battery in the bay and press down until the battery-bay latch

release clicks.

Storing a Battery

Remove the battery when you store your computer for an extended period of time. A battery discharges

during prolonged storage. After a long storage period, recharge the battery fully before you use it (see

"Charging the Battery" on page 17).

1 battery tab 2 battery 3 battery-bay latch release

2

3

1

Quick Reference Guide 19

Troubleshooting

Lockups and Software Problems

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the

Product Information Guide.

The computer does not start up

ENSURE THAT THE AC ADAPTER IS FIRMLY CONNECTED TO THE COMPUTER AND TO THE ELECTRICAL OUTLET.

The computer stops responding

NOTICE: You might lose data if you are unable to perform an operating system shutdown.

T

URN THE COMPUTER OFF — If you are unable to get a response by pressing a key on your keyboard or moving your

mouse, press and hold the power button for at least 8 to 10 seconds until the computer turns off. Then restart your

computer.

A program stops responding or crashes repeatedly

NOTE: Software usually includes installation instructions in its documentation or on a floppy disk, CD, or DVD.

E

ND THE PROGRAM —

1

Press <Ctrl><Shift><Esc> simultaneously.

2

Click

Task Manager

.

3

Click

Applications

.

4

Click the program that is no longer responding.

5

Click

End Task

.

CHECK THE SOFTWARE DOCUMENTATION — If necessary, uninstall and then reinstall the program.

A program is designed for an earlier Microsoft

®

Windows

®

operating system

RUN THE PROGRAM COMPATIBILITY WIZARD — The Program Compatibility Wizard configures a program so it

runs in an environment similar to non-Windows XP operating system environments.

1

Click

Start

→

All Programs

→

Accessories

→

Program Compatibility Wizard

→

2

Follow the instructions on the screen.

A solid blue screen appears

TURN THE COMPUTER OFF — If you are unable to get a response by pressing a key on your keyboard or moving your

mouse, press and hold the power button for at least 8 to 10 seconds until the computer turns off. Then restart your

computer.

20 Quick Reference Guide

Dell Latitude D830 クイックスタートガイド

Dell Latitude D830 クイックスタートガイド

関連論文