GA-7DX+

Gigabyte GA-7DX+, GA-7DXR+ 取扱説明書

  • こんにちは! GIGABYTE GA-7DXR+, GA-7DX+, GA-7DXE マザーボードのユーザーマニュアルの内容を読み込みました。このマザーボードのFCC準拠、無線干渉への対策、使用方法などについてご質問があれば、お気軽にお尋ねください。
  • このマザーボードは、どのようなFCC規制に準拠していますか?
    無線通信への干渉が発生した場合、どうすればよいですか?
    このマザーボードのモデル番号は何ですか?
FCC Compliance Statement:
This equipment has been tested and found to
comply with limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable
protection against harmful interference in
residential installations. This equipment
generates, uses, and can radiate radio
frequency energy, and if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause interference to radio or
television equipment reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna
-Move the equipment away from the receiver
-Plug the equipment into an outlet on a circuit different from that to which
the receiver is connected
-Consult the dealer or an experienced radio/television technician for
additional suggestions
You are cautioned that any change or modifications to the equipment not
expressly approve by the party responsible for compliance could void Your
authority to operate such equipment.
This device complies with Part 15 of the FCC Rules. Operation is subjected to
the following two conditions 1) this device may not cause harmful interference
and 2) this device must accept any interference received, including interference
that may cause undesired operation.
DECLARATION OF CONFORMITY
Per FCC Part 2 Section 2. 1077(a)
Responsible Party Name: G.B.T. INC. (U.S.A.)
Address: 17358 Railroad Street
City of Industry, CA91748
Phone/Fax No: (818) 854-9338/ (818) 854-9339
hereby declares that the product
Product Name:
Model Number:
Mother Board
Conforms to the following specifications:
FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a),
Class B Digital Device
Supplementary Information:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful
and (2) this device must accept any inference received, including
that may cause undesired operation.
Representative Person's Name: ERIC LU
Signature:
Date: Dec.14, 2001
Eric Lu
GA-7DXR+
Declaration of Conformity
We, Manufacturer/Importer
(full address)
G.B.T. Technology Träding GMbH
Ausschlager Weg 41, 1F, 20537 Hamburg, Germany
declare that the product
( description of the apparatus, system, installation to which it refers)
Mother Board
GA-7DXR+
is in conformity with
(reference to the specification under which conformity is declared)
in accordance with 89/336 EEC-EMC Directive
EN 55011 Limits and methods of measurement EN 61000-3-2* Disturbances in supply systems caused
of radio disturbance characteristics of EN60555-2 by household appliances and similar
industrial, scientific and medical (ISM electrical equipment “Harmonics”
high frequency equipment
EN55013 Limits and methods of measurement EN61000-3-3* Disturbances in supply systems caused
of radio disturbance characteristics of EN60555-3 by household appliances and similar
broadcast receivers and associated electrical equipment “Voltage fluctuations”
equipment
EN 55014 Limits and methods of measurement EN 50081-1 Generic emission standard Part 1:
of radio disturbance characteristics of Residual, commercial and light industry
household electrical appliances,
portable tools and similar electrical EN 50082-1 Generic immunity standard Part 1:
apparatus Residual, commercial and light industry
EN 55015 Limits and methods of measurement EN 55081-2 Generic emission standard Part 2:
of radio disturbance characteristics of Industrial environment
fluorescent lamps and luminaries
EN 55020 Immunity from radio interference of EN 55082-2 Generic immunity standard Part 2:
broadcast receivers and associated Industrial environment
equipment
EN 55022 Limits and methods of measurement ENV 55104 Immunity requirements for household
of radio disturbance characteristics of appliances tools and similar apparatus
information technology equipment
DIN VDE 0855 Cabled distribution systems; Equipment EN 50091- 2 EMC requirements for uninterruptible
part 10 for receiving and/or distribution from power systems (UPS)
part 12 sound and television signals
CE marking (EC conformity marking)
The manufacturer also declares the conformity of above mentioned product
with the actual required safety standards in accordance with LVD 73/23 EEC
EN 60065 Safety requirements for mains operated EN 60950 Safety for information technology equipment
electronic and related apparatus for including electrical business equipment
household and similar general use
EN 60335 Safety of household and similar EN 50091-1 General and Safety requirements for
electrical appliances uninterruptible power systems (UPS)
Manufacturer/Importer
Signature : Timmy Huang
(Stamp) Date : Dec. 14, 2001 Name : Timmy Huang
FCC Compliance Statement:
This equipment has been tested and found to
comply with limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable
protection against harmful interference in
residential installations. This equipment
generates, uses, and can radiate radio
frequency energy, and if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause interference to radio or
television equipment reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna
-Move the equipment away from the receiver
-Plug the equipment into an outlet on a circuit different from that to which
the receiver is connected
-Consult the dealer or an experienced radio/television technician for
additional suggestions
You are cautioned that any change or modifications to the equipment not
expressly approve by the party responsible for compliance could void Your
authority to operate such equipment.
This device complies with Part 15 of the FCC Rules. Operation is subjected to
the following two conditions 1) this device may not cause harmful interference
and 2) this device must accept any interference received, including interference
that may cause undesired operation.
DECLARATION OF CONFORMITY
Per FCC Part 2 Section 2. 1077(a)
Responsible Party Name: G.B.T. INC. (U.S.A.)
Address: 17358 Railroad Street
City of Industry, CA91748
Phone/Fax No: (818) 854-9338/ (818) 854-9339
hereby declares that the product
Product Name:
Model Number:
Mother Board
Conforms to the following specifications:
FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a),
Class B Digital Device
Supplementary Information:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful
and (2) this device must accept any inference received, including
that may cause undesired operation.
Representative Person's Name: ERIC LU
Signature:
Date: Jan. 4, 2002
Eric Lu
GA-7DX+
Declaration of Conformity
We, Manufacturer/Importer
(full address)
G.B.T. Technology Träding GMbH
Ausschlager Weg 41, 1F, 20537 Hamburg, Germany
declare that the product
( description of the apparatus, system, installation to which it refers)
Mother Board
GA-7DX+
is in conformity with
(reference to the specification under which conformity is declared)
in accordance with 89/336 EEC-EMC Directive
EN 55011 Limits and methods of measurement EN 61000-3-2* Disturbances in supply systems caused
of radio disturbance characteristics of EN60555-2 by household appliances and similar
industrial, scientific and medical (ISM electrical equipment “Harmonics”
high frequency equipment
EN55013 Limits and methods of measurement EN61000-3-3* Disturbances in supply systems caused
of radio disturbance characteristics of EN60555-3 by household appliances and similar
broadcast receivers and associated electrical equipment “Voltage fluctuations”
equipment
EN 55014 Limits and methods of measurement EN 50081-1 Generic emission standard Part 1:
of radio disturbance characteristics of Residual, commercial and light industry
household electrical appliances,
portable tools and similar electrical EN 50082-1 Generic immunity standard Part 1:
apparatus Residual, commercial and light industry
EN 55015 Limits and methods of measurement EN 55081-2 Generic emission standard Part 2:
of radio disturbance characteristics of Industrial environment
fluorescent lamps and luminaries
EN 55020 Immunity from radio interference of EN 55082-2 Generic immunity standard Part 2:
broadcast receivers and associated Industrial environment
equipment
EN 55022 Limits and methods of measurement ENV 55104 Immunity requirements for household
of radio disturbance characteristics of appliances tools and similar apparatus
information technology equipment
DIN VDE 0855 Cabled distribution systems; Equipment EN 50091- 2 EMC requirements for uninterruptible
part 10 for receiving and/or distribution from power systems (UPS)
part 12 sound and television signals
CE marking (EC conformity marking)
The manufacturer also declares the conformity of above mentioned product
with the actual required safety standards in accordance with LVD 73/23 EEC
EN 60065 Safety requirements for mains operated EN 60950 Safety for information technology equipment
electronic and related apparatus for including electrical business equipment
household and similar general use
EN 60335 Safety of household and similar EN 50091-1 General and Safety requirements for
electrical appliances uninterruptible power systems (UPS)
Manufacturer/Importer
Signature : Timmy Huang
(Stamp) Date : Jan. 4, 2002 Name : Timmy Huang
FCC Compliance Statement:
This equipment has been tested and found to
comply with limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable
protection against harmful interference in
residential installations. This equipment
generates, uses, and can radiate radio
frequency energy, and if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause interference to radio or
television equipment reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna
-Move the equipment away from the receiver
-Plug the equipment into an outlet on a circuit different from that to which
the receiver is connected
-Consult the dealer or an experienced radio/television technician for
additional suggestions
You are cautioned that any change or modifications to the equipment not
expressly approve by the party responsible for compliance could void Your
authority to operate such equipment.
This device complies with Part 15 of the FCC Rules. Operation is subjected to
the following two conditions 1) this device may not cause harmful interference
and 2) this device must accept any interference received, including interference
that may cause undesired operation.
DECLARATION OF CONFORMITY
Per FCC Part 2 Section 2. 1077(a)
Responsible Party Name: G.B.T. INC. (U.S.A.)
Address: 17358 Railroad Street
City of Industry, CA91748
Phone/Fax No: (818) 854-9338/ (818) 854-9339
hereby declares that the product
Product Name:
Model Number:
Mother Board
Conforms to the following specifications:
FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a),
Class B Digital Device
Supplementary Information:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful
and (2) this device must accept any inference received, including
that may cause undesired operation.
Representative Person's Name: ERIC LU
Signature:
Date: Mar. 22, 2002
Eric Lu
GA-7DXE
Declaration of Conformity
We, Manufacturer/Importer
(full address)
G.B.T. Technology Träding GMbH
Ausschlager Weg 41, 1F, 20537 Hamburg, Germany
declare that the product
( description of the apparatus, system, installation to which it refers)
Mother Board
GA-7DXE
is in conformity with
(reference to the specification under which conformity is declared)
in accordance with 89/336 EEC-EMC Directive
EN 55011 Limits and methods of measurement EN 61000-3-2* Disturbances in supply systems caused
of radio disturbance characteristics of EN60555-2 by household appliances and similar
industrial, scientific and medical (ISM electrical equipment “Harmonics”
high frequency equipment
EN55013 Limits and methods of measurement EN61000-3-3* Disturbances in supply systems caused
of radio disturbance characteristics of EN60555-3 by household appliances and similar
broadcast receivers and associated electrical equipment “Voltage fluctuations”
equipment
EN 55014 Limits and methods of measurement EN 50081-1 Generic emission standard Part 1:
of radio disturbance characteristics of Residual, commercial and light industry
household electrical appliances,
portable tools and similar electrical EN 50082-1 Generic immunity standard Part 1:
apparatus Residual, commercial and light industry
EN 55015 Limits and methods of measurement EN 55081-2 Generic emission standard Part 2:
of radio disturbance characteristics of Industrial environment
fluorescent lamps and luminaries
EN 55020 Immunity from radio interference of EN 55082-2 Generic immunity standard Part 2:
broadcast receivers and associated Industrial environment
equipment
EN 55022 Limits and methods of measurement ENV 55104 Immunity requirements for household
of radio disturbance characteristics of appliances tools and similar apparatus
information technology equipment
DIN VDE 0855 Cabled distribution systems; Equipment EN 50091- 2 EMC requirements for uninterruptible
part 10 for receiving and/or distribution from power systems (UPS)
part 12 sound and television signals
CE marking (EC conformity marking)
The manufacturer also declares the conformity of above mentioned product
with the actual required safety standards in accordance with LVD 73/23 EEC
EN 60065 Safety requirements for mains operated EN 60950 Safety for information technology equipment
electronic and related apparatus for including electrical business equipment
household and similar general use
EN 60335 Safety of household and similar EN 50091-1 General and Safety requirements for
electrical appliances uninterruptible power systems (UPS)
Manufacturer/Importer
Signature : Timmy Huang
(Stamp) Date : Mar. 22, 2002 Name : Timmy Huang
7DX(R)+/7DXE
AMD AthlonTM/AthlonTM XP/DuronTM Socket A
處理器主機板
中文安裝手冊
AMD AthlonTM/AthlonTM XP/DuronTM Socket A 處理器主機板
REV. 1004
12MC-7DXRP-1004
使用手冊之組織架構
此安裝手冊是依下列章節組織而成:
1) 版本修改摘要 使用手冊版本修改資訊
2) 清點附件 產品盒內附件清單
3) 特色彙總 主機板詳細資訊和規格
4) 安裝指南 主機板安裝指南
5) 效能測試和晶片組功能方塊
主機板效能測試結果和晶片組功能方
塊圖
6) Suspend to RAM
Dual BIOS*/**/Q-Flash
STR Dual BIOS/Q-Flash 安裝使用說
7) Four Speaker SPDIF* Four Speaker SPDIF 安裝說明
8) @BIOSTM EasyTuneIIITM @BIOSTM EasyTuneIIITM 功能介紹
9) RAID* RAID 功能介紹
10) BIOS 功能設定 BIOS 功能設定指南
11) 技術支援送修單 記錄使用配備,提供快速服
12) 附錄 參考資料
"*" GA-7DXR+才支援此功能
"**" GA-7DX+才支援此功能
版本修改摘要 P.1
清點附件 P.2
特色彙總 P.3
7DX(R)+/7DXE 主機板的元件配置圖 P.5
安裝指南 P.6
插座及接腳設定的快速安裝指南 P.14
晶片組功能方塊圖 P.26
安裝 Suspend to RAM 功能 P.27
BIOS(Dual BIOS)*/**/Q-Flash 功能介紹 P.32
Four Speaker SPDIF 功能介紹* P.40
@BIOSTM 功能介紹 P.46
EasyTuneIIITM 功能介紹 P.47
RAID 功能介紹* P.48
BIOS 組態設定目錄 P.64
技術支援/送修單 P.98
附錄 P.99
"*" GA-7DXR+才支援此功能
"**" GA-7DX+才支援此功能
7DX(R)+/7DXE 主機板
1
版本修改摘要
版本 修改摘要 日期
1.0 7DXR+主機板中文安裝手冊首版發行 Dec. 2001
1.0 7DXR+/7DX+主機板中文安裝手冊第二版發行。 Dec. 2001
1.0 7DXR+/7DX+主機板中文安裝手冊第三版發行。 Jan. 2002
1.0 7DX(R)+/7DXE 主機板中文安裝手冊第四版發行。 Mar. 2002
本手冊所有提及之商標與名稱皆屬該公司所有。
主機板上的任何貼紙請勿自行撕毀,否則會影響到產品保固期限的認定標準。
本手冊若有任何內容修改,恕不另行通知。
2002 3 15 台北,台灣
清點附件
2
清點附件
! 7DXR+7DX+7DXE主機板一片
! 硬碟插座排線 x 1 x 2* (綠色插座為ATA133,紅色插座為ATA100)
! 軟碟插座排線 x 1
! 主機板驅動程式光碟片
! 7DX(R)+/7DXE 中文使用手冊
! 4 x通用串列埠插座排線x 1(USB2.0)*
! 電腦組裝秘笈
"*" GA-7DXR+才支援此功能
7DX(R)+/7DXE 主機板
3
特色彙總
規格 # 主機板採四層設計 ATX 規格 30.5 公分 x 24.5 公分
中央處理器 # AMD AthlonTM/AthlonTM XP/DuronTM (K7) Socket A
處理器
128K 第一層快取記憶體及 256K/64K 第二層快
取記憶體內含於 CPU
# 支援 1.4 GHz 以上或更快
# 系統匯流排支援 200/266 MHz FSB
晶片組 7DX(R)+/7DXE由以下晶片組成:
# AMD 761 Memory/PCI/AGP 北橋控制晶片
# VT82C686B 超級南橋(內含 I/O 晶片)
記憶體 # 3 184-pin DDR DIMM 插槽
# 支援 PC1600 DDR PC2100 DDR SDRAM
# 最高可支援到 3GB DRAM
# 僅支援 2.5V DDR SDRAM
# 支援 64bit ECC type DRAM integrity 模式
I/O 控制器 # VT82C686B
擴充槽 # 1AGP 擴充槽,支援 4倍及 AGP 2.0 規格**/***
# 1AGP Pro 擴充槽,支援 4/2 (1.5V/3.3V)*
# 532-bit PCI Bus 擴充槽
(支援 33MHz 及相容 PCI 2.2 規格)
# 1AMR (Audio Modem Riser) 擴充槽*/**
內建 IDE # IDE 1 IDE 2 支援 PIO mode 3, 4 UDMA 33 /
ATA 66 / ATA100 IDE & ATAPI CD-ROM
# IDE3 IDE4 適用於 RAID, Ultra ATA-133, Ultra
ATA-100, EIDE*
# 4 IDE bus master IDE 插座可連接 8個裝置*
續下頁
"*" GA-7DXR+才支援此功能
"**" GA-7DX+才支援此功能
"***" GA-7DXE 才支援此功能
特色彙總
4
內建周邊設備 # 1 個軟碟插座支援兩台碟機
(360K720K1.2M1.44M 2.88M bytes)
# 1 列插座可支援 Normal/EPP/ECP 模式
# 2個串列插座 (COM A COM B)
# 支援 USB 2.0 x 4*USB 1.1 x 2 及內建 USB
1.1 x 2
# 1個紅線連接(可連接 IR )
內建 RAID 功能* # Promise PDC20276
# 支援資料 striping (RAID 0) or mirroring (RAID 1)
# 支援雙 IDE 道並作業
# 符合 IDE bus master 標準
# 時顯示狀態及錯誤檢查
# Mirroring 功能支援自動背景重
# 內建的BIOS LBA 延伸13h 碟機容
量轉換
內建 USB 2.0* # NEC D720100AS1 晶片
硬體 # 中央處理器/系統風扇轉
# 中央處理器/系統溫度偵
# 系統電自動
# 測中央處理器過溫警告
內建 # CODEC 效晶片
# Creative CT5880 效晶片*
# Line In/Line Out/Mic In/CD_In/Game Port
/Four Speaker*SPDIF *
PS/2 插座 # PS/2 鍵盤連接埠及 PS/2 滑鼠連接埠
BIOS # 使用經授權 AWARD BIOS2M bit 記憶體
# 支援雙 BIOS (Dual BIOS)*/**
特色 # 網路遠端開機功能*/**
# 型數據機功能
# 支援 USB PS/2 鍵盤從 STR 模式喚醒功能
# 4散熱風扇接腳*/**
# 鍵盤過電流保
# 支援 STR 功能(Suspend-To-RAM)
# 支援 @BIOSEasyTuneIII
"*" GA-7DXR+才支援此功能
"**" GA-7DX+才支援此功能
7DX(R)+/7DXE 主機板
5
7DX(R)+/7DXE 主機板的元件配置圖
7DX(R)+/7DXE
PCI1
PCI2
VT82C686B
AMD 761
Game & Audio
COM
A
LPT
KB_MS
Main
BIOS
PWR_FAN*/**
BAT1
FDD
IDE2
IDE1
CPU_FAN
F_PANEL
WOL*/**
USB1
AMR*/**
PCI3
PCI4
PCI5 USB2
Creative
CT5880*
CD_IN
CODEC
COM B
A
TX POWER
IR
SYS_FAN
DDR3
DDR2
DDR1
AGP_12V*
Backup
BIOS*/**
IDE4*
IDE3*
PDC
20276*
SW1
NB_FAN
Socket A
CPU
SW2*/**
AGP_PRO*
USB4*
USB3*
NEC*
注意GA-7DX+ /GA-7DXE 支援 AGP 4X 擴充槽
"*" GA-7DXR+才支援此功能
"**" GA-7DX+才支援此功能
安裝指南
6
安裝指南
開始
警告!
主機板由許多精密體電其他元件所構成,這些積體電路很
易因電影響而損失。所以請在正式安裝做好下列準
備。
1. 電腦的電源關閉,最好拔除
2. 取主機板儘量避免觸碰金屬接線部份
3. 體電元件(中央處理器RAM),最夠戴上有防靜電手
4. 在積體電路未安裝需將元件置放在靜防靜內。
5. 當您將主機板中的 ATX 器插座上的插頭拔除時,請認電
開關關閉狀況
安裝主機板
大多數電腦機底部會有個固定孔孔位,可使主機板確實固定並且不會
小心不要讓螺絲到任何 PCB 板上的線件,當印刷主機板表面
固定孔時可使用塑膠墊來讓螺絲與主機板表面隔離過避免造成主
機板損壞故障
7DX(R)+/7DXE 主機板
7
請依下列方式,成電腦的安裝:
步驟 1 參考手冊內容調整 Jumper
步驟 2 安裝中央處理器 (CPU)
步驟 3 安裝記憶體模組
步驟 4 安裝所有介面卡
步驟 5 連接所有訊排線線及版控制線
步驟 6 BIOS 組態設定
步驟 7 安裝軟體驅動程式
步驟 3
步驟 2
步驟 5
步驟 5
步驟 1
步驟 4
安裝指南
8
中央處理器速設定
可以DIP switch SW1 來做中央處理器外頻切換選擇100/133MHz(
於中央處理器設計)
SW1: CPU FREQ.
100 MHz ()
OFF ON
2 100MHz 133MHz
133 MHz
ON
2
ON
2
!我們議您選購之中央處理器選擇外頻
SW2 選擇中央處理器的倍*/** OONXOFF
Ratio 1 2 3 4 5
Auto () X X X X O
5X O O X O X
5.5X X O X O X
6X O X X O X
6.5X X X X O X
7X O O O X X
7.5X X O O X X
8X O X O X X
8.5X X X O X X
9X O O X X X
9.5X X O X X X
10X O X X X X
10.5X X X X X X
11X O O O O X
11.5X X O O O X
12X O X O O X
12.5X X X O O X
!的中央處理器為鎖頻,此功能則無作用。
"*" GA-7DXR+才支援此功能 "**" GA-7DX+才支援此功能
7DX(R)+/7DXE 主機板
9
安裝中央處理器(CPU)
使用的中央處理器為本主機板的支援範圍
中央處理器正面
中央處理器背面
1.桿向外拉出並昇起
2.中央處理器的斜角對齊於插座的
行插插座(中央處理器安裝是有方
)
安裝指南
10
AMD 中央處理器散熱裝置安裝:
在你啟動電腦之,請先確認是否裝妥散熱裝置,否則將導致中央處理器過熱
毀。
3.桿往按至原位
(塗抹散熱膏於處理器上,可使處理器與
散熱風扇較好散熱效果。
以上動請參考散熱風的使用手冊。)
4.使用AMD 證過散熱風扇
5.箭頭序將風扇確實扣緊
6.認中央處理器散熱風扇線接中央處理器散熱風扇,安裝成。
安裝步驟請參考散熱風扇的使用手冊。
/