Philips LUMEA SC198X ユーザーマニュアル

タイプ
ユーザーマニュアル

このマニュアルも適しています

Lumea
SC198X
4222_100_3961_1_FrontCover_A5_fc.pdf 1 03-07-15 14:53
4
5
9
10
8
21 3
7 6
English 4
Czech 26
Polski 50
Romna 76
Slovenščina 101
繁體中文 124
English
Welcome
Welcome to the beauty world of Lumea! You are
only a few weeks away from silky-smooth skin.
Philips Lumea uses Intense Pulsed Light (IPL)
technology, known as one of the most effective
methods to continuously prevent hair regrowth. In
close collaboration with skin experts we adapted
this light-based technology, originally used in
professional beauty salons, for easy and effective
use in the safety of your home. Philips Lumea is
gentle and offers convenient and effective
treatment at a light intensity that you find
comfortable. Unwanted hairs are finally a thing of
the past. Enjoy the feeling of being hair-free and
look and feel amazing every day.
To fully benefit from the support that Philips offers,
register your product at
www.philips.com/welcome. For further
information, please go to www.philips.com/lumea
to find our experts' advice, tutorial videos and
FAQs and make the most of your Lumea.
Device overview
1 Light exit window with integrated UV filter
2 Integrated safety system
3 Skin tone sensor
4 Flash button
5 On/off button
6 Intensity lights (1-5)
7 'Ready to flash' light
8 Device socket
9 Adapter
10 Small plug
4
English
Who should not use Lumea? Contraindica
tions
-
Never use the device if you have skin type V
and VI (You rarely to never sunburn, very dark
tanning). In this case you run a high risk of
developing skin reactions, such as
hyperpigmentation and hypopigmentation,
strong redness or burns.
-
Never use the device if you are pregnant or
breast feeding as the device was not tested on
pregnant or breast feeding women.
-
Never use the device if you suffer from any of
the diseases listed below:
-
If you have a skin disease such as active skin
cancer, you have a history of skin cancer or
any other localized cancer in the areas to be
treated.
-
If you have pre-cancerous lesions or
multiple atypical moles in the areas to be
treated.
-
If you have a history of collagen disorder,
including a history of keloid scar formation or
a history of poor wound healing.
-
If you have a history of vascular disorder,
such as the presence of varicose veins or
vascular ectasia in the areas to be treated.
-
If your skin is sensitive to light and easily
develops a rash or an allergic reaction.
5
English
-
If you have infections, eczema, burns,
inflammation of hair follicles, open
lacerations, abrasions, herpes simplex,
wounds or lesions and haematomas in the
areas to be treated.
-
If you have had surgery in the areas to be
treatedin the last three weeks.
-
If you have epilepsy with flashlight
sensitivity.
-
If you have diabetes, lupus erythematodes,
porphyria or congestive heart disease.
-
If you have any bleeding disorder.
-
If you have a history of immunosuppressive
disease (including HIV infection or AIDS)
-
If you have received radiation therapy or
chemotherapy within the past 3 months.
-
Never use the device if you take any of the
medications listed below:
-
If your skin is currently being treated with or
has recently been treated in the past week
with Alpha-Hydroxy Acids (AHAs), Beta-
Hydroxy Acids (BHAs), topical isotretinoin
and azelaic acid.
-
If you have taken any form of isotretinoin
Accutane or Roaccutane in the last six
months. This treatment can make skin more
susceptible to tears, wounds and irritations.
-
If you are on painkillers which reduce the
skin's sensitivity to heat.
-
If you are taking photosensitising agents or
medications, check the package insert of
your medicine and never use the device if it
is stated that it can cause photo-allergic
reactions, photo-toxic reactions or if you
have to avoid sun when taking this medicine.
6
English
-
If you take anticoagulation medications,
including heavy use of aspirin, in a manner
which does not allow for a minimum 1-week
washout period prior to each treatment.
-
If you take immunosuppressive medications.
-
Never use the device on the following areas:
-
Around the eyes and near the eyebrows.
-
On nipples, areolas, labia minora, vagina,
anus and the inside of the nostrils and ears.
-
Men must not use it on the scrotum and
face.
-
Over or near anything artificial like silicone
implants, pacemakers, subcutaneous
injection ports (insulin dispenser) or
piercings.
-
On moles, freckles, large veins, darker
pigmented areas, scars, skin anomalies
without consulting your doctor. This can
result in a burn and a change in skincolor,
which makes it potentially harder to identify
skin-related diseases.
-
On warts, tattoos or permanent make-up.
This can result in a burn and a change in skin
color.
-
On areas, where you use long-lasting
deodorants. This can result in skin reactions.
-
Never use the device on sunburned, recently
tanned or fake-tanned skin.
Note: This list is not exhaustive. If you are not
sure whether you can use the device, we
advise you to consult a doctor.
7
English
Important
Danger
-
Keep the device and the adapter dry.
-
If the device is broken, do not touch any inner
part to avoid electric shock.
-
Never insert any objects into the device.
Warning
-
This device is not intended for use by persons
(including children) with reduced physical,
sensory or mental capabilities, unless they have
been given supervision or instruction
concerning use of the device by a person
responsible for their safety.
-
Children should be supervised to ensure that
they do not play with the device.
-
The device is not intended for children under
the age of 15 years. Teenagers aged between 15
and 18 years can use the device with the
consent and/or assistance of their parents or
the persons who have parental authority over
them.Adults of 18 years and older can use the
device freely.
-
Always check the device before you use it. Do
not use the device or adapter if it is damaged.
Always replace a damaged part with one of the
original type.
-
The adapter contains a transformer. Do not cut
off the adapter to replace it with another plug,
as this causes a hazardous situation.
8
English
-
Do not use the device if the UV filter of the light
exit window is broken.
Caution
-
This device is not washable. Never immerse the
device in water and do not rinse it under the
tap.
-
For hygienic reasons, the device should only be
used by one person.
-
Use the device only at settings suitable for your
skin type. Use at higher settings than those
recommended can increase the risk of skin
reactions and side effects.
-
Only use the device for its intended purpose as
shown in the user manual.
-
Never use compressed air, scouring pads,
abrasive cleaning agents or aggressive liquids
such as petrol or acetone to clean the device.
-
Always return the device to a service centre
authorised by Philips for examination or repair.
Repair by unqualified people could cause an
extremelyhazardous situation for the user.
Electromagnetic fields (EMF)
This Philips device complies with all applicable
standards and regulations regarding exposure to
electromagnetic fields.
9
English
How IPL works
With IPL technology, gentle pulses of light are
applied to the skin and absorbed by the hairroot.
The darker the hair, the better the pulses of light
are absorbed.
The pulses of light stimulate the hair follicle to go
into a resting phase. As a consequence, the hair
sheds naturally and hair regrowth is prevented,
leaving your skin continuously silky-smooth.
The cycle of hair growth consists of different
phases. IPL technology is only effective when the
hair is in its growing phase.Not all hairs are in the
growing phase at the same time. This is why we
recommend an 8-week treatment schedule
followed by touch-ups to make sure all hairs are
effectively treated in the growing phase.
Note: Treatment with Lumea is not effective if you
have light blond, blond as light hairs do not
absorb enough light. Below you can see the hair
colors for which Lumea is suitable and effective.
Suitable body hair colors
10
English
What to expect
Immediately after the 1st treatment
Afterthe first treatment, it can take 1 to 2 weeks for
the hairs to fall out. In the first weeks following the
initial treatments, you still see some hairs
growing.These are likely to be hairs that were not
in their growing phase during the first treatments.
After 2-3 treatments
After 2-3 treatments, you should see a noticeable
reduction in hair growth. However, to effectively
treat all hairs, it is important to keep on treating
according to the recommended treatment
schedule.
After 4-5 treatments
After 4-5 treatments, you should see a significant
reduction of hair growth in the areas that you
treated with Lumea. A reduction of hair density
should be visible as well. Keep on treating with
frequent touch-ups (every 4-8 weeks)to maintain
the result.
Tanning advice
Tanning with natural or artificial sunlight
Intentionally exposing your skin to natural or
artificial sunlight with the aim of developing a tan
influences the sensitivity and color of your skin.
Therefore the following is important:
11
English
-
After each treatment, wait at least 48 hours
before tanning. Even after 48 hours, make sure
that the treated skin does not show any redness
from the treatment anymore.
-
In case of exposing your skin to the sun
(without tanning intentionally) in the 48 hours
after treatment, use a sunblock SPF 50+ on the
treated areas. After this period, you can use a
sunblock SPF 30+ for two weeks.
-
After tanning, wait at least 2 weeks before you
use Lumea. Perform a skin test to determine the
appropriate light intensity setting.
-
Do not use Lumea on sunburned body areas.
Note: Occasional and indirect sun exposure
does not qualify as tanning.
Tanning with creams
If you have used an artificial tanning lotion, wait
until the artificial tan has disappeared completely
before you use the device.
Before you use your Lumea
Pretreating your skin
Before you use Lumea, you should pretreat your
skinby removing hairs on the surface of your skin.
This allows the light to beabsorbed by the hair
parts below the skin surface to ensure effective
treatment. You can either shave, short-trim, epilate
or wax. Do not use depilatory creams, as chemicals
may cause skin reactions.
12
English
If you chose to wax, please wait 24 hours before
using Lumea to let your skin rest.We recommend
that you take a shower before the treatment to
ensure that all possible residue of wax has been
removed from your skin.
1 Pretreat the areas you intend to treat with
Lumea.
2 Clean your skin and make sure it is hair-free,
entirely dry and free from oily substances.
Note: Once the hairs stop growing back, which
usually happens after 4-5 treatments, you no
longer have to pretreat your skin before you
use the device.
Skin test
When you use Lumea for the first time or after
recent tanning, perform a skin test on each area to
be treated. The skin test is necessary to check your
skin's reaction to the treatment and to determine
the correct light intensity setting for each
bodyarea.
1 Choose an area close to the area you intend to
treat.
2 Turn on the device. Make sure you select
setting 1.
3 Put the device against your skin and press the
flash button to release a flash.
4 Slide the device over the skin to the next area
to be treated.
5 Increase the setting by one level, apply a flash
and slide the device to the next area. Repeat
this for all levels within the recommended range
for your skin type.
13
English
6 After the skin test, wait 24 hours and check your
skin for any reaction. If your skin shows
reactions, choose the highest setting that did
not result in any skin reaction for subsequent
use.
Using your Philips Lumea
Skin tone sensor
For extra safety, the integrated skin tone sensor
measures the skin tone at the beginning of each
session and occasionally during the session. If it
detects a skin tone that is too dark for treatment
with Lumea,the 'ready to flash' light starts blinking
orange rapidly and the device automatically
disables to prevent you from developing skin
reactions. This means that it does not emit pulses
when you press the flash button.
Selecting the right light intensity
Lumea provides 5 different light intensities.
Depending on your skin type and light intensity
level you find comfortable, you can select the right
light intensity setting.
1 Consult the table below to select the right
setting.
2 To adjust the light intensity setting, press the
on/off button one or more times until you have
reached the required setting. The
corresponding intensity light lights up green.
14
English
Note: Thedevice automatically disables when
your skin tone is too dark, to prevent you from
developing skin reactions. The integrated skin
tone sensor does not tell you which light
intensity setting to use, as Philips Lumea gives
you the freedom to select the light intensity
that you find most convenient.
3 Lumea should never be painful. If you
experience discomfort, reduce the light
intensity setting.
4 After recent tanning, perform a skin test to
determine the right light intensity setting.
Skin type Skin tone Light intensity setting
I White: you always
sunburn, never tan.
4/5
II Beige: you easily
sunburn, tan
minimally.
4/5
III Light brown: you
sunburn easily, tan
slowlyto light brown.
3/4
IV Mid brown: youou
rarely sunburn, tan
easily.
1/2/3
V Dark brown: you
rarely sunburn, tan
very easily.
You cannot use the
device
VI Brownish black or
darker: you
rarelyornever
sunburn, very dark
tanning.
You cannot use the
device
15
English
Note:Your skin may react differently on different
days/occasions for a number of reasons.
Handling the device
1 Before use, clean the light exit window.
2 Put the small plug in the device and put the
adapter in the wall socket.
3 Switch on the device and select the right light
intensity for your skin tone.
90º
4 Place the device at a 90° angle on the skin so
that the integrated safety system is in contact
with your skin.
The integrated safety system prevents
unintentional flashingwithout skin contact.
5 Press the devicefirmly onto your skin to
ensureproper skin contact. The device then
automatically performs a skin tone analysis and
the'ready to flash' light blinks orange slowlyto
indicate that you can proceed with the
treatment.
Note: When the ‘ready to flash’ light starts
blinking
orange rapidly, your skin is not
suitable for treatment. In this case, the device
automatically disables. You can try to use the
device on other areas with a lighter skin tone.
16
English
Note: If the 'ready to flash' light lights up
orange continuously the device is not
completely in contact with your skin.
TIP: If you use Lumea on your bikini area and
want to leave some hair in place, make sure
that the skin tone sensor is not placed on the
remaining hair during the treatment, as this
can cause the device to block
6 Press the flash button to release a flash.The
devices makes a soft popping sound. You
should feel a warm sensation because of the
flash.
Note: The light produced by the device is
harmless to your eyes. It is not necessary to
wear goggles during use. Use the device in a
well-lit roomso that the light is less glaring to
your eyes.
7 Place the device on the next area to be treated.
After each flash, it takes up to 3.5 seconds until
the device is ready to flash again. You can
release a flash when the 'ready to flash' light
lights up again.
8 To make sure that you have treated all areas,
release the flashes close to each other.
Effective light only comes out of the light exit
window, therefore there should be some
overlap.However, make sure you flash the
same area only once. Flashing the same area
twice doesn't improve the effectiveness of the
treatment, but increases the risk of skin
reactions.
9 When you have finished the treatment, press
and hold the on/off button for 2 seconds to
switch off the device.
17
English
Two treatment modes: Stamp & Flash and
Slide & Flash
YourPhilips Lumea has two treatment modes for
more convenient use on different body areas:
-
The Stamp & Flash mode is ideal to treat small
orcurvy areas like knees and underarms.
Simply press and releasethe flash button to
release a single flash.
-
The Slide & Flash mode offers convenient use
on larger areas like legs. Keep the flash button
pressed while you slide the device over your
skinto release several flashes in a row.
Recommended treatment schedule
For the first 4 to 5 treatments, we advise you to
use Philips Lumea once every two weeks to ensure
that all hairs are treated.
Touch-up phase
After the initial treatment phase (4-5 treatments),
we recommend touch-ups every 4 to 8
weeks,when you see hairs growing back. This is to
maintain results and enjoy smooth skin for
months.The time between treatments may vary
based on your individual hair regrowth and also
across different body areas.
18
English
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146

Philips LUMEA SC198X ユーザーマニュアル

タイプ
ユーザーマニュアル
このマニュアルも適しています