Using a Lens Hood (See illustration E)
To prevent deterioration of image quality by blocking out unnecessary
light, use a lens hood.
When you use a ash in situations where the distance
between the subject and the camera is close, the ash
light may be partially blocked by the lens or a lens hood. To
ensure proper lighting, remove the lens hood or adjust the
distance between the camera and subjects.
Using a Filter (optional) (See illustration F)
Before putting a lter on the lens, make sure it is compatible. Refer to
"Specications" for compatible lter size.
•
A lter is a precise optical product. Keep away from dust,
dirt, or scratches. Also, do not try to mount two or more
lters at the same time. Doing so may deteriorate the image
quality and cause vignetting (a reduction of an image’s
brightness or saturation at the periphery as the viewing
angle of the lens is hidden).
•
In case of a thick framed lter, the vignetting can occur with
a wide-angle lens.
Specications
Lens Name
SAMSUNG 18-55mm F3.5-5.6
OIS III
Focal Length
18–55 mm
Focal Length in 35 mm Equivalent
27.7–84.7 mm
Lens Construction-Elements
12
Lens Construction-Groups
9
Aspherical Elements
1
Angle of View
75.9°–28.7°
Maximum Aperture
F3.5–5.6
Minimum Aperture
F22
Number of Diaphragm Blades
7
Minimum Focus Distance (Wide)
0.28 m
Minimum Focus Distance (Tele)
0.28 m
Maximum Magnication
0.22X
Lens Hood
Included
Optical Image Stabilizer
Yes
Mount Type
Samsung NX Mount
Filter Size
58 mm
Max. Diameter
63 mm
Length
65.1 mm
Weight (Lens Only, Approx.)
204 g
Operating Temperature
0–40 °C
Operating Humidity
5–85 %
Lens Name
SAMSUNG 12-24mm F4-5.6 ED
Focal Length
12–24 mm
Focal Length in 35 mm Equivalent
18.5–37 mm
Lens Construction-Elements
10
Lens Construction-Groups
8
Aspherical Elements
2
ED Elements
1
Angle of View
99.0°–60.7°
Maximum Aperture
F4–5.6
Minimum Aperture
F22
Number of Diaphragm Blades
7
Attaching and Removing the Lens
► To attach the lens,
1
Remove the lens cap, lens mount cover, and body cap.
2
Align the red mark on the lens with the red mark on the
camera body. Then, rotate the lens as shown in the illustration
until it locks into place. (See illustration B)
► To remove the lens, press and hold the lens release button, and then
rotate the lens as shown in the illustration. (See illustration C)
Setting the Focus Method
Set the AF/MF switch on the lens to AF or MF.
Auto Focus (AF): The focus is adjusted automatically when you half-
press [Shutter].
Do not apply excessive force to the front of the lens while the
camera is using auto focus (AF). Doing so may cause the lens
to malfunction.
Manual Focus (MF): The focus can be adjusted manually by rotating
the focus ring on the lens.
Use the MF Assist function on the camera to aid with manual
focusing. Refer to your camera manual for more details.
Using i-Function
When you press the i-Function button on the lens, you can use
the E mode or Z or adjust some shooting options.
In the E mode, you can select scenes or lter effects that
your camera supports. Z allows you to zoom in on a subject
with less degradation of photo quality than the Digital zoom. This
feature is available only when your camera supports it. i-Scene
mode is available only on some camera models.
1
Rotate the mode dial to
P
,
A
,
S
,
M
, or
i
.
2
Press [i-Function] on the lens to select a setting.
•
Available settings may differ depending on the shooting mode.
Setting
Shooting mode Setting
Shooting mode
E
i
Aperture value
A
,
M
Z
P, A, S, M, i
Exposure value
P
,
A
,
S
Shutter speed
S
,
M
White Balance, ISO
P
,
A
,
S
,
M
3
Rotate the focus ring on the lens to adjust the setting (or to
change the zoom rate in
Z
mode).
4
Focus and capture the photo.
•
To select the items that will appear when you press
the i-Function button on the lens, you can use the iFn
Customizing menu on your camera.
•
Available scenes or lter effects in the E mode may
vary depending on the camera model.
•
If you select Z, the photo resolution will vary according
to the zoom rate.
Using the Zoom Ring
Set the composition of the photo (the focal distance of the lens) by
rotating the zoom ring on the lens. (See illustration D)
When you use the zoom function, focus can be slightly
changed. Adjust the focus again before you capture a photo.
Before Using This Device
Thank you for purchasing the Samsung Lens. The illustrations in this
manual are based on the SAMSUNG 18-55mm F3.5-5.6 OIS III. Update
the rmware of the camera body and lens. Visit www.samsung.com to
download the rmware.
Unpacking
Lens, Lens cap, Lens mount cover, Hood, Case, User manual
•
Optional Item: Filter
Layouts (See illustration A)
1 Lens mount index 2 Zoom ring 3 Focus ring
4 Lens hood mount index 5 Lens 6 AF/MF switch
7 i-Function button 8 Lens information contacts
Minimum Focus Distance (Wide)
0.24 m
Minimum Focus Distance (Tele)
0.24 m
Maximum Magnication
0.14X
Lens Hood
Included
Optical Image Stabilizer
No
Mount Type
Samsung NX Mount
Filter Size
58 mm
Max. Diameter
63.5 mm
Length
65.5 mm
Weight (Lens Only, Approx.)
208 g
Operating Temperature
0–40 °C
Operating Humidity
5–85 %
Lens Name
SAMSUNG 50-200mm F4-5.6 ED
OIS III
Focal Length
50–200 mm
Focal Length in 35 mm Equivalent
77–308 mm
Lens Construction-Elements
17
Lens Construction-Groups
13
ED Elements
2
Angle of View
31.4°–8.0°
Maximum Aperture
F4–5.6
Minimum Aperture
F22
Number of Diaphragm Blades
7
Minimum Focus Distance (Wide)
0.98 m
Minimum Focus Distance (Tele)
0.98 m
Maximum Magnication
0.2X
Lens Hood
Included
Optical Image Stabilizer
Yes
Mount Type
Samsung NX Mount
Filter Size
52 mm
Max. Diameter
70 mm
Length
100.5 mm
Weight (Lens Only, Approx.)
406 g
Operating Temperature
0–40 °C
Operating Humidity
5–85 %
Health and Safety Information
Please read the following safety tips carefully for proper and
safe use.
Warning
•
Do not stare at the sun through the lens or camera.
This may cause severe damage to your eyes.
•
Keep your lens or camera away from small children
and pets.
Caution
•
Do not store the lens in direct sunlight without the
lens cap. Direct sunlight that passes through the lens
may combust if it comes into contact with ammable
materials.
•
Use only sturdy tripods. Lightweight or unstable tripods
may fall over and damage the camera.
Lens Storage and Maintenance
•
Store the lens in dry and well ventilated areas.
•
Do not store the lens in areas of high temperature or humidity or in a
closet, car, or conned area where chemicals are stored.
•
The lens is not waterproof. Be careful not to allow it to get wet when
using it near water.
•
Do not use chemicals such as thinner, alcohol, or benzene to
remove dust.
•
Do not drop the lens or apply excessive shock to it. The lens is a
precise optical product.
•
Avoid using the lens anywhere there is a sudden temperature
change. Keep the lens in a plastic bag or a camera case to prevent
condensation from forming on the inside or outside of the lens.
•
When carrying or not using the lens, place the lens cap and lens
mount cover on the lens to prevent contamination from foreign
particles and protect the lens from scratches.
•
Do not keep the camera mounted on a tripod without the lens cap. The
inside of the camera can be damaged by direct sunlight.
•
Check the lens once every year or two for best performance.
•
Do not apply excessive force to the front of the lens.
•
For safe use of the lens, mount or dismount the lens while the
camera is turned off.
•
Samsung is not responsible for any damage incurred by using other
manufacturers’ lenses.
•
Make sure to change lenses only in a clean environment and do
not put your ngers into the lens mount when mounting the lens.
Foreign particles may affect shooting results or cause a malfunction
if they enter the camera body or the lens.
•
Do not transport or store the lens with any part of the tube is
extended. Completely retract the lens tube inside the body by
rotating the zoom ring on the lens.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature
indicates that the product and its electronic accessories (e.g.
charger, headset, USB cable) should not be disposed of with
other household waste at the end of their working life. To
prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate these items from
other types of waste and recycle them responsibly to promote
the sustainable reuse of material resources. Household users
should contact either the retailer where they purchased this
product, or their local government ofce, for details of where
and how they can take these items for environmentally safe
recycling. Business users should contact their supplier and
check the terms and conditions of the purchase contract. This
product and its electronic accessories should not be mixed with
other commercial wastes for disposal.
English
A
D
C
E
B
F
1
2
6
8
7
1
2
3
4
5
Please refer to the warranty that came with your
product or visit our website www.samsung.com for
after-sales service or inquiries.