How to use / 使用方法 /
4-277-937-32(1)
Stereo
Headphones
Operating Instructions
使用說明書
XBA-1
©2011 Sony Corporation
Printed in Thailand
English Stereo headphones
Specifications
Type: Closed, Balanced Armature
Driver unit: Balanced Armature
Power handling capacity: 100 mW (IEC*)
Impedance: 24 Ω at 1 kHz
Sensitivity: 108 dB**
Frequency response: 5 Hz – 25,000 Hz
Cord: 1.2 m, OFC litz cord neck-chain
Plug: Gold-plated L-shaped stereo mini plug
Mass: Approx. 3 g (without cord)
Supplied accessories
Hybrid silicone rubber earbuds: SS (red) (2), S
(orange) (2), M (green) (attached to the unit at
the factory) (2), L (light blue) (2) / Noise
isolation earbuds: S (orange) (2), M (green) (2),
L (light blue) (2) / Cord adjuster (winds cord up
to 50 cm) (1) / Carrying pouch(1)
* IEC = International Electrotechnical
Commission
** 150 mV input
Design and specifications are subject to change
without notice.
Optional replacement earbuds can be ordered
from your nearest Sony dealer.
About noise isolation earbuds
Supplied noise isolation earbuds provide a snug
fit for effective attenuation of ambient noise.
Notes
Prolonged use of snugly fitting earbuds may
strain your ears. If you experience discomfort,
discontinue use.
The pressure-relieving urethane cushion is
extremely soft. If it breaks or detaches from
the earbuds, it will not take its correct
position and the earbuds will lose their noise
isolation function.
The urethane cushion may deteriorate over
time. If the pressure-relieving power is lost
and the urethane cushion hardens, the
earbuds may lose their noise isolation
function.
Do not wash the earbuds. Keep them dry,
otherwise they may deteriorate quickly.
Features
Newly developed Balanced Armature
driver unit
Newly developed micro-size driver unit (full-
range) reproduces smooth and clear vocal
sound.
Newly developed Double Layered
Housing
Liquid Crystal Polymer inner housing and
special ABS outer housing reproduce clear,
distortion-free mid-high range.
Noise-blocking design
Noise-blocking design attenuates ambient
noise and sound leakage.
Super-small body
Balanced Armature driver unit allows for a
super small body, and ultimate wearing
comfort.
Earbuds
4 sizes of hybrid silicone rubber earbuds (SS,
S, M, L), for secure fit and long-term wearing
comfort.
3 sizes of noise isolation earbuds (S, M, L),
for effective attenuation of ambient noise.
About hybrid silicone rubber earbuds
Keep earbuds clean. To clean the earbuds, wash
them with a mild detergent solution.
Removing the headphones
After use, remove the headphones slowly.
Note
Headphones are designed to fit closely in your
ears. If the headphones are pressed hard while in
use or taken off too quickly, they may cause injury.
Wearing headphones may produce a diaphragm
click sound. This is not a malfunction.
SS S M L
Hybrid silicone rubber earbuds
混合矽膠耳塞
Noise isolation earbuds
噪音隔離耳塞
S M L
Pressure-relieving
urethane cushion
氨基鉀酸酯釋壓泡棉
Precautions
High volume may affect your
hearing. For traffic safety, do
not use while driving or
cycling.
Install the earbuds firmly. If an
earbud accidentally detaches
and is left in your ear, it may
cause injury.
Do not leave the stereo headphones in a
location subject to direct sunlight, heat or
moisture.
Note on static electricity
Static electricity accumulated in the body may
cause mild tingling in your ears.
To minimise the effect, wear clothes made from
natural materials.