MSI B250 PC MATE 取扱説明書

カテゴリー
マザーボード
タイプ
取扱説明書

このマニュアルも適しています

I
Quick Start
Quick Start
Thank you for purchasing the MSI
®
Z270 PC MATE/ H270 PC MATE/
B250 PC MATE motherboard. This Quick Start section provides
demonstration diagrams about how to install your computer. Some
of the installations also provide video demonstrations. Please link
to the URL to watch it with the web browser on your phone or tablet.
You may have even link to the URL by scanning the QR code.

󲫞MSI
®
Z270 PC MATE/ H270 PC MATE/ B250 PC MATE
󷽡 󰵴 󷯈󽴸
 PC󶅉󵰨󳜰󴎁󱰴󳎔󸋺
󶅉󵰨󳅜󹌬󰺱󲕌󴜵󳏀󰿙
󵱮󳦤󳦥󳥆󷪹󸋺
URL󷧯QR URL
󱋔󱛬󴮒󹌦
󼔄 󻝳󼖏󼞇
MSI
®
Z270 PC MATE/ H270 PC MATE/ B250 PC MATE 󺼣󻱇󻇃󺦫󺹋
󻗯󼖬󼩃󻷋󻘣󻗫 󺃟󻕻󼨸󺞗󺞳. 󻱃 󻉏󻉓󻪟󻗫󺝣 󼏃󼦷󼗿󺹋 󻗳󼌧󼨧󺝣 󻃸󻅤󻪟 󺟏󼨫
󺠿󺽷 󺞳󻱃󻪃󺋇󺱷󺇋 󻱋󻉏 󺠿󺽷 󺢨󻫐󻖐󻰓 󻳫󺇄󼨧󺆯 󻱗󻞄󺞗󺞳. 󼰃󺟏󻳓󼬣
󺫟󺝣 󼖫󻋣󺺎󻰧 󻯈 󻋛󺱋󻭿󻳏󺹋 󼚄󼨧󻪻 URL󻪟 󺺐󼔻󼨫 󼮓 󻗳󼌧 󺢨󻫐󻖐󻰓
󺃟󻖐󼨧󻞫󺋿 󻃣󺱜󺞗󺞳. 󺫟󺝣 QR 󼐣󺦫󺹋 󻝳󼍣󼨧󻪻 URL󻪟 󺺐󼔻󼨯 󻛧󺢓
󻱗󻞄󺞗󺞳.
󲴱󸔡󳉹󲮹
󲼯󷳓󲹢󷿒󷽡 MSI
®
Z270 PC MATE/ H270 PC MATE/ B250 PC MATE 󰶻
󳼦󳨣󽴸󳦦󲴱󸔡󳉹󲮹󵱏󵸐󳏀󰿙󲹢󲔟󷡥󹄷󶤢󵒹󵤛󵸖󱱭󷩒󽴺󰹡󳏀󰿙󸛉󱐖󶅊󰻞󵒹
󲔟󷡥󵤛󵸖󲱨󴵛󼶋󷰟󲹢󰻄󳡱󲾶󱴘󳅜󳼦󳃵󲪃󳨣󵒹󴣴󷨓󱬽󸔯󰵴 URL 󶈫󱲨󸕏󷝥
󷨛󵖐󲹡󰷳󱜴󰻅󳍀󳎿 QR code 󵒹󳜱󲮮󲴰󸔠󸔮󳍺󶩜󶈪󱲨󽴸
󲴰󸔠󱌇󸽷
󲼮󷹨󲹡󸀞󰸉 MSI
®
Z270 PC MATE/ H270 PC MATE/ B250 PC MATE 󰶻
󳨤󳦦󲴰󸔠󱌇󸽷󸛉󱐕󳏀󰿙󰸬󳥤󱌣󲁶󰽧󲔞󷠴󷷧󵶿󳦽󴜶󵤚󱱄󳪥󰹉󷸄󳜷󸑯󳏀
󰿙󰸬󷨡󹏹󴜶󵤚󷸽󰾫󵈾󲹡󵒹󳅜󳦽󳃵󲪃󳨤󵉐󶡱󰵴󵒹󶓹󹏝󴐺󷨣󱬽󸹇󳍺󶩜󶓹󱲨
󷨝󵖐󲹡󰷳󱜴󰻅󸔒󸑃󳆋󳎾QR󵜧󸹇󳍺󱑍URL
II
Quick Start
1
2
3
6
4
5
7
8
9
http://youtu.be/bf5La099urI
Installing a Processor/ CPU󱜋󰺱/ 󼧓󺴫󻘇󻗫 󻗳󼌧󼨧󺋿/ 󲔟
󷡥󷐗󵀛󱬽/ 󲔞󷠴󱾆󵀛󱬽
Youtube
󰼐󸟐
http://v.youku.com/v_show/
id_XNDkyOTY1NjQ0.html
III
Quick Start
1
1
2
2
3
3
DIMMB2 DIMMB2
DIMMB1
DIMMA2 DIMMA2 DIMMA2
DIMMA1
Installing DDR4 memory/ DDR4󱜋󰺱/
DDR4 󺼣󺽷󺹻 󻗳󼌧󼨧󺋿/ 󲔟󷡥 DDR4 󷪺󳁋󹠔/ 󲔞󷠴 DDR4 󱌼󲒹
http://youtu.be/T03aDrJPyQs
Youtube
󰼐󸟐
http://v.youku.com/v_show/id_XNzUyMTI5ODI4.html
IV
Quick Start
Connecting the Front Panel Header/
  󳍹 󶇳 / 󻳓󺽃 󼟷󺗟 󼎳󺗴󼗿 󻪿󺅿󼨧󺋿/
󸔮󳍺󱑺󶔩󹈘󳨣󸢛󶥂/ 󸑷󳍺󱑹󶔩󹈘󳨤󳍺󱿣
http://youtu.be/DPELIdVNZUI
1
2 10
9
JFP1
1 HDD LED + 2 Power LED +
3 HDD LED - 4 Power LED -
5 Reset Switch 6 Power Switch
7 Reset Switch 8 Power Switch
9 Reserved 10 No Pin
RESET SW
POWER SW
POWER LED+
POWER LED-
HDD LED
HDD LED
RESET SW
JFP1
HDD LED
HDD LED -
HDD LED +
POWER LED -
POWER LED +
POWER LED
Youtube
󰼐󸟐
http://v.youku.com/v_show/id_XNjcyMTczMzM2.html
V
Quick Start
1
2
Installing the Motherboard/ 󱜋󰺱/
󺼣󻱇󻇃󺦫 󻗳󼌧󼨧󺋿/ 󲔟󷡥󰶻󳼦󳨣/ 󲔞󷠴󰶻󳨤
VI
Quick Start
1
2
3
4
5
Installing SATA Drives/ SATA󱜋󰺱/
SATA 󺦫󺱋󻱃󻋛 󻗳󼌧󼨧󺋿/ 󲔟󷡥 SATA 󵡃󵠉󳼦/ 󲔞󷠴 SATA 󷸄󱾋
http://youtu.be/RZsMpqxythc
http://v.youku.com/v_show/
id_XNDkzODU5MTky.html
Youtube
󰼐󸟐
VII
Quick Start
1
2
3
4
5
6
Installing a Graphics Card/ 󱜋󰺱/
󺋇󺱧󼨌 󼍃󺦫 󻗳󼌧󼨧󺋿 / 󲔟󷡥󹏐󵤛󱙔/ 󲔞󷠴󳠒󱙔
http://youtu.be/mG0GZpr9w_A
http://v.youku.com/v_show/
id_XNDkyOTc3MzQ4.html
Youtube
󰼐󸟐
VIII
Quick Start
Connecting Peripheral Devices/ 󱟰󸐠󳼤󱬼󳍹󶇳/
󻷋󻆏 󻱴󼌧 󻪿󺅿󼨧󺋿/ 󸔯󳍻󱟱󸘺󷫥󱆕/ 󸑷󳍺󱾫󱰶󷸄󱾋
IX
Quick Start
ATX_PWR1
CPU_PWR1
Connecting the Power Connectors/ 󹄶󴙂󳍹󶇳/ 󻳓󻮟
󼎳󺗴󼗿 󻪿󺅿󼨧󺋿/ 󳏅󰵴󹄷󴙃󳍻󹍨/ 󸑷󳍺󵉐󴙃󳍺󱿣
http://youtu.be/gkDYyR_83I4 http://v.youku.com/v_show/id_XNDkzODU0MDQw.html
Youtube
󰼐󸟐
X
Quick Start
1
4
2
3
Power On/ 󸔑󹄶/ 󻳓󻮟 󼏫󺋿/ 󱥭󱕜󹄷󴙃/ 󲮔󳦽
1
Contents
Contents
Safety Information ................................................................................................. 2
Specifications ......................................................................................................... 3
Specification Comparison Table ............................................................................. 8
Rear I/O Panel ....................................................................................................... 9
LAN Port LED Status Table..................................................................................... 9
Realtek HD Audio Manager .................................................................................... 9
Overview of Components .................................................................................... 11
CPU Socket ........................................................................................................... 12
DIMM Slots ............................................................................................................ 13
PCI_E1~5, PCI1: PCIe/ PCI Expansion Slots ........................................................ 14
M2_1~2: M.2 Slots (Key M) ................................................................................... 15
SATA1~6: SATA 6Gb/s Connectors ....................................................................... 16
JFP1, JFP2: Front Panel Connectors ................................................................... 17
CPU_PWR1, ATX_PWR1: Power Connectors ....................................................... 18
JCOM1: Serial Port Connector ............................................................................. 18
JUSB1~2: USB 2.0 Connectors ............................................................................. 19
JUSB3, JUSB4(optional): USB 3.1 Gen1 Connectors ........................................... 19
CPU_FAN1, PUMP_FAN1, SYS_FAN1~4: Fan Connectors ................................... 20
JAUD1: Front Audio Connector ............................................................................ 21
JCI1: Chassis Intrusion Connector ....................................................................... 21
JTPM1: TPM Module Connector ........................................................................... 22
JBAT1: Clear CMOS (Reset BIOS) Jumper ........................................................... 22
JLPT1: Parallel Port Connector ........................................................................... 23
EZ Debug LED ....................................................................................................... 23
BIOS Setup ........................................................................................................... 24
Using BIOS ............................................................................................................ 25
Entering BIOS Setup ............................................................................................. 25
Resetting BIOS ...................................................................................................... 26
Updating BIOS ....................................................................................................... 26
EZ Mode ................................................................................................................ 27
Advanced Mode .................................................................................................... 29
OC Menu................................................................................................................ 30
Software Description ........................................................................................... 36
Installing Windows
®
7/ 8.1/ 10.............................................................................. 36
Installing Drivers .................................................................................................. 36
Installing Utilities ................................................................................................. 36
2
Safety Information
Safety Information
y The components included in this package are prone to damage from electrostatic
discharge (ESD). Please adhere to the following instructions to ensure successful
computer assembly.
y Ensure that all components are securely connected. Loose connections may cause
the computer to not recognize a component or fail to start.
y Hold the motherboard by the edges to avoid touching sensitive components.
y It is recommended to wear an electrostatic discharge (ESD) wrist strap when
handling the motherboard to prevent electrostatic damage. If an ESD wrist strap
is not available, discharge yourself of static electricity by touching another metal
object before handling the motherboard.
y Store the motherboard in an electrostatic shielding container or on an anti-static
pad whenever the motherboard is not installed.
y Before turning on the computer, ensure that there are no loose screws or metal
components on the motherboard or anywhere within the computer case.
y Do not boot the computer before installation is completed. This could cause
permanent damage to the components as well as injury to the user.
y If you need help during any installation step, please consult a certified computer
technician.
y Always turn off the power supply and unplug the power cord from the power outlet
before installing or removing any computer component.
y Keep this user guide for future reference.
y Keep this motherboard away from humidity.
y Make sure that your electrical outlet provides the same voltage as is indicated on
the PSU, before connecting the PSU to the electrical outlet.
y Place the power cord such a way that people can not step on it. Do not place
anything over the power cord.
y All cautions and warnings on the motherboard should be noted.
y If any of the following situations arises, get the motherboard checked by service
personnel:
Liquid has penetrated into the computer.
The motherboard has been exposed to moisture.
The motherboard does not work well or you can not get it work according to user
guide.
The motherboard has been dropped and damaged.
The motherboard has obvious sign of breakage.
y Do not leave this motherboard in an environment above 60C (140F), it may damage
the motherboard.
3
Specifications
Specifications
CPU
Supports 6th/7th Gen Intel
®
Core™ i3/i5/i7 processors,
and Intel
®
Pentium
®
and Celeron
®
processors for Socket
LGA1151
Chipset Intel
®
Z270/ H270/ B250 Chipset
Memory
y
4x DDR4 memory slots, support up to 64GB
Z270 chipset + 7th Gen processors support DDR4
3800(OC)/ 3600(OC)/ 3200(OC)/ 3000(OC)/ 2800(OC)/
2600(OC)/ 2400/ 2133 MHz*
Z270 chipset + 6th Gen processors support DDR4
3600(OC)/ 3200(OC)/ 3000(OC)/ 2800(OC)/ 2600(OC)/
2400(OC)/ 2133 MHz*
H270/ B250 chipset + 7th Gen processors support DDR4
2400/ 2133 MHz*
H270/ B250 chipset + 6th Gen processors support DDR4
2133 MHz*
y
Dual channel memory architecture
y
Supports Intel
®
Extreme Memory Profile (XMP)
* Please refer www.msi.com for more information on compatible memory.
Expansion Slots
y 2x PCIe 3.0 x16 slots (supports x16/x4 mode)*
y 3x PCIe 3.0 x1 slots**
y 1x PCI slot
* The PCI_E4 slot will be unavailable when an M.2 PCIe SSD module has been
installed in the M.2_2 slot.
** The PCI_E2/ PCI_E5 slot will be unavailable when an expansion card has
been installed in the PCI_E3/ PCI1 slot.
Onboard Graphics
y 1x HDMI™ port, supports a maximum resolution of
4096x2160@30Hz(7th CPU), 4096x2160@24Hz(6th CPU),
2560x1600@60Hz
y 1x DVI-D port, supports a maximum resolution of
1920x1200@60Hz
y 1x VGA port, supports a maximum resolution of
2048x1536@50Hz, 2048x1280@60Hz, 1920x1200@60Hz
Multi-GPU y Supports 2-Way AMD
®
CrossFire™ Technology
Continued on next page
4
Specifications
Continued from previous page
Storage
Intel
®
Z270/ H270/ B250 Chipset
y 6x SATA 6Gb/s ports*
y 2x M.2 slots (Key M)
Support up to PCIe 3.0 x4 and SATA 6Gb/s
Support PCIe 3.0 x4 NVMe U.2 SSD with Turbo U.2 Host
Card**
M2_1 slot supports 2242/ 2260 /2280/ 22110 storage
devices
M2_2 slot supports 2242/ 2260 /2280 storage devices
Intel
®
Optane™ Memory Ready
y Supports Intel
®
Smart Response Technology for Intel
Core™ processors (optional)
* M.2 and SATA ports maximum support 2x M.2 PCIe SSDs + 6x SATA HDDs.
Please refer to page 17 for M.2 slots with examples of various combination
possibilities.
** The Turbo U.2 Host Card is not included, please purchase separately.
RAID (optional)
Intel
®
Z270/ H270 Chipset
y Supports RAID 0, RAID1, RAID 5 and RAID 10 for SATA
storage devices
y Supports RAID 0 and RAID1 for M.2 PCIe storage devices*
* M.2 PCIe RAID volume can be created with M.2 GENIE. Please refer to page
28 for details about M.2 GENIE.
USB
y ASMedia
®
ASM2142 Chipset
1x USB 3.1 Gen2 (SuperSpeed USB 10Gbps) Type-C port
on the back panel
1x USB 3.1 Gen2 (SuperSpeed USB 10Gbps) Type-A port
on the back panel
y Intel
®
Z270/ H270/ B250 Chipset
8x/ 6x USB 3.1 Gen1 (SuperSpeed USB) ports (4 Type-A
ports on the back panel, 4/ 2 ports available through the
internal USB connector) (optional)
6x USB 2.0 (High-speed USB) ports (2 ports on the
back panel, 4 ports available through the internal USB
connector)
Audio
y Realtek
®
ALC887 Codec
y 7.1-Channel High Definition Audio
LAN 1x Intel I219-V Gigabit LAN controller
Continued on next page
5
Specifications
Continued from previous page
Back Panel
Connectors
y 1x PS/2 keyboard/ mouse combo port
y 2x USB 2.0 Type-A ports
y 1x VGA port
y 1x DVI-D port
y 1x HDMI™ port
y 1x LAN (RJ45) port
y 4x USB 3.1 Gen1 Type-A ports
y 1x USB 3.1 Gen2 Type-A port
y 1x USB 3.1 Gen2 Type-C port
y 3x audio jacks
Internal Connectors
y 1x 24-pin ATX main power connector
y 1x 8-pin ATX 12V power connector
y 6x SATA 6Gb/s connectors
y 2x USB 2.0 connectors (support additional 4 USB 2.0 ports)
y 2x/ 1x USB 3.1 Gen1 connectors (support additional 4/ 2
USB 3.1 Gen1 ports) (optional)
y 1x 4-pin CPU fan connector
y 1x 4-pin water pump fan connector
y 4x 4-pin system fan connectors
y 1x Front panel audio connector
y 2x Front panel connectors
y 1x TPM module connector
y 1x Chassis Intrusion connector
y 1x Serial port connector
y 1x Parallel port connector
y 1x TBT connector
y 1x Clear CMOS jumper
I/O Controller NUVOTON NCT6795 Controller Chip
Hardware Monitor
y CPU/System temperature detection
y CPU/System fan speed detection
y CPU/System fan speed control
Form Factor
y ATX Form Factor
y 12 in. x 9.6 in. (30.4 cm x 24.3 cm)
Continued on next page
6
Specifications
Continued from previous page
BIOS Features
y 1x 128 Mb/ 64 Mb flash (optional)
y UEFI AMI BIOS
y ACPI 5.0, PnP 1.0a, SM BIOS 2.8
y Multi-language
Software
y Drivers
y COMMAND CENTER
y LIVE UPDATE 6
y FAST BOOT
y SUPER CHARGER
y MYSTIC LIGHT
y RAMDISK
y X-BOOST
y MSI SMART TOOL
y NETWORK MANAGER
y Intel
®
Extreme Tuning Utility
y Norton™ Internet Security Solution
y Google Chrome™ ,Google Toolbar, Google Drive
MSI Exclusive
Features
y CLICK BIOS 5 (optional)
EZ Mode & Advanced Mode Switching
Board Explorer (optional)
Hardware Monitor
y COMMAND CENTER
System Monitor
Smart Fan Control
y RAMDISK
y LIVE UPDATE 6
Continued on next page
7
Specifications
Continued from previous page
Specification
Highlights
y Isolated Audio PCB
EMI Shielding
High Quality Audio Capacitors
De-pop audio circuit
y DDR4 Boost Support
Dual-Channel DDR4 Memory Support
Isolated DDR4 Circuit Design
DDR4 XMP Ready
y PCI Express 3.0 Support
2-Way AMD CrossFireTM Support
y USB 3.1 Gen2 Ready
USB 3.1 Gen2 (10 Gb/s) Type-A Ready
USB 3.1 Gen2 (10 Gb/s) Type-C Ready
USB Power Delivery Profile 3 Support
y EZ Debug LED
8
Specifications
Specification Comparison Table
Z270 PC MATE H270 PC MATE B250 PC MATE
Chipest Z270
H270 B250
7th Gen processors
support DDR4 frequency
(MHz)
3800(OC),
3600(OC),
3200(OC),
3000(OC),
2800(OC),
2600(OC), 2400,
2133
2400, 2133 2400, 2133
6th Gen processors
support DDR4 frequency
(MHz)
3600(OC),
3200(OC),
3000(OC),
2800(OC),
2600(OC),
2400(OC), 2133
2133 2133
Supports RAID 0,1,5,10 Yes
Yes No
Supports Intel
®
Smart
Response Technology
Yes
No No
Intel
®
Optane™ Memory
Ready
M.2_1 & M.2_2
slots
M.2_1 & M.2_2
slots
M.2_2 slot
USB 3.1 Gen1 internal
connectors
2 (4 ports)
JUSB3 & JUSB4
2 (4 ports)
JUSB3 & JUSB4
1 (2 ports)
JUSB3
BIOS capacity 128Mb
64Mb 64Mb
BIOS interface CLICK BIOS 5
CLICK BIOS CLICK BIOS
Board Explorer Yes
No No
OC GENIE 4 Yes
No No
9
Rear I/O Panel
Rear I/O Panel
PS/2
LAN
USB 2.0
DVI-D
VGA
Link/ Activity LED
Status Description
Off No link
Yellow Linked
Blinking Data activity
Speed LED
Status Description
Off 10 Mbps connection
Green 100 Mbps connection
Orange 1 Gbps connection
LAN Port LED Status Table
Line-in
Line-out
Mic in
USB 3.1
Gen2
Type-C
USB 3.1 Gen2
USB 3.1 Gen1
Realtek HD Audio Manager
After installing the Realtek HD Audio driver, the Realtek HD Audio Manager icon will
appear in the system tray. Double click on the icon to launch.
Jack Status
Device
Selection
Connector
Strings
Profiles
Main Volume
Application
Enhancement
Advanced
Settings
10
Rear I/O Panel
y Device Selection - allows you to select a audio output source to change the related
options. The check sign indicates the devices as default.
y Application Enhancement - the array of options will provide you a complete
guidance of anticipated sound effect for both output and input device.
y Main Volume - controls the volume or balance the right/left side of the speakers
that you plugged in front or rear panel by adjust the bar.
y Profiles - toggles between profiles.
y Advanced Settings - provides the mechanism to deal with 2 independent audio
streams.
y Jack Status - depicts all render and capture devices currently connected with your
computer.
y Connector Settings - configures the connection settings.
Audio 7.1-channel Configuration
To configure 7.1-channel audio, you have to connect front audio I/O module to JAUD1
connector and follow the below steps.
1. Click on the Advanced Settings to open the dialog below.
2. Select Mute the rear output device, when a front headphone plugged in.
3. Plug your speakers to audio jacks on rear and front I/O panel. When you plug into
a device at an audio jack, a dialogue window will pop up asking you which device is
current connected.
1 / 1

MSI B250 PC MATE 取扱説明書

カテゴリー
マザーボード
タイプ
取扱説明書
このマニュアルも適しています