Bose Smart Soundbar System 取扱説明書

BASS MODULE 500

IMPORTANT SAFETY INSTRUCTIONS

2

|

ENG

Please read and keep all safety and use instructions.

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including

ampliﬁers) that produce heat.

9. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the

point where they exit from the apparatus.

10. Only use attachments/accessories speciﬁed by the manufacturer.

11. Unplug this apparatus during lightning storms or when unused for long periods of time.

12. Refer all servicing to qualiﬁed personnel. Servicing is required when the apparatus has been damaged in any

way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

WARNINGS/CAUTIONS

This symbol on the product means there is uninsulated, dangerous voltage within the product enclosure that

may present a risk of electrical shock.

This symbol on the product means there are important operating and maintenance instructions in this guide.

Contains small parts which may be a choking hazard. Not suitable for children under age 3.

This product contains magnetic material. Consult your physician on whether this might aect your

implantable medical device.

• To reduce the risk of ﬁre or electrical shock, do NOT expose this product to rain, liquids or moisture.

• Do NOT expose this product to dripping or splashing, and do not place objects ﬁlled with liquids, such as vases,

on or near the product.

• Keep the product away from ﬁre and heat sources. Do NOT place naked ﬂame sources, such as lighted candles,

on or near the product.

• Do NOT make unauthorized alterations to this product.

• Do NOT use in vehicles or boats.

• The speaker wire and interconnect cables included with this system are not approved for in-wall installation.

Please check your local building codes for the correct type of wire and cable required for in-wall installation.

• Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain

readily operable.

• Due to ventilation requirements, Bose does not recommend placing the product in a conﬁned space such as in a

wall cavity or in an enclosed cabinet.

• The product label is located on the bottom of the product.

REGULATORY INFORMATION

3

|

ENG

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment o and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Changes or modiﬁcations not expressly approved by Bose Corporation could void the user’s authority to operate

this equipment.

This device complies with FCC and ISED Canada radiation exposure limits set forth for general population.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

This device complies with part 15 of the FCC Rules and with ISED Canada license-exempt RSS standard(s). Operation

is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

This equipment should be installed and operated with a minimum distance of 20 cm between radiator and your body.

This device for operation in the band 5150 – 5250 MHz is only for indoor use to reduce the potential for harmful

interference to co-channel mobile satellite systems.

Receiver Category = 2

Bose Corporation hereby declares that this product is in compliance with the essential requirements and

other relevant provisions of Directive 2014/53/EU and all other applicable EU directive requirements. The

complete declaration of conformity can be found at: www.Bose.com/compliance

The product, in accordance with the Ecodesign Requirements for Energy Related Products Directive 2009/125/EC, is

in compliance with the following norm(s) or document(s): Regulation (EC) No. 1275/2008, as amended by Regulation

(EU) No. 801/2013.

Required Power State Information

Power Modes

Standby Networked Standby

Power consumption in speciﬁed power mode, at

230V/50Hz input

< 0.5 W Bose wireless < 2.0 W

Time after which equipment is automatically

switched into mode

< 2.5 hours

≤

20 minutes

Power consumption in networked standby if all wired

network ports are connected and all wireless network

ports are activated, at 230V/50Hz input

N/A < 2.0 W

Network port deactivation/activation procedures.

Deactivating all networks will enable standby mode.

Per Annex II 3(a) of Regulation 801/2013 (“Lot 26” amendment of

1275/2008), the requirement to deactivate a wireless port “does not

apply to products which rely on a single wireless network connection for

intended use and have no wired network connection.”

REGULATORY INFORMATION

4

|

ENG

For Europe:

Frequency band of operation 2400 to 2483.5 MHz:

• Bluetooth/Wi-Fi: Maximum transmit power less than 20 dBm EIRP.

Frequency bands of operation 5150 to 5350 MHz and 5470 to 5725 MHz:

• Wi-Fi: Maximum transmit power less than 20dBm EIRP.

This device is restricted to indoor use when operating in the 5150 to 5350 MHz frequency range in all EU Member

States listed in the table.

BE DK IE UK FR CY SK HU AT SE

BG DE PT EL HR LV LT MT PL

CZ EE FI ES IT RO LU NL SI

This symbol means the product must not be discarded as household waste, and should be delivered to an

appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources,

human health and the environment. For more information on disposal and recycling of this product, contact

your local municipality, disposal service, or the shop where you bought this product.

Management Regulation for Low-power Radio-frequency Devices

Article XII

According to “Management Regulation for Low-power Radio-frequency Devices” without permission granted by

the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter

original characteristic as well as performance to an approved low power radio-frequency devices.

Article XIV

The low power radio-frequency devices shall not inﬂuence aircraft security and interfere legal communications; If

found, the user shall cease operating immediately until no interference is achieved. The said legal communications

means radio communications operated in compliance with the Telecommunications Act.

The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM

radio wave radiated devices.

China Restriction of Hazardous Substances Table

Names and Contents of Toxic or Hazardous Substances or Elements

Toxic or Hazardous Substances and Elements

Part Name

Lead

(Pb)

Mercury

(Hg)

Cadmium

(Cd)

Hexavalent

(CR(VI))

Polybrominated

Biphenyl

(PBB)

Polybrominated

diphenylether

(PBDE)

PCBs X O O O O O

Metal Parts X O O O O O

Plastic Parts O O O O O O

Speakers X O O O O O

Cables X O O O O O

This table is prepared in accordance with the provisions of SJ/T 11364.

O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this

part is below the limit requirement of GB/T 26572.

X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials

used for this part is above the limit requirement of GB/T 26572.

REGULATORY INFORMATION

5

|

ENG

Taiwan Restriction of Hazardous Substances Table

Equipment name: Wireless Bass Module, Type designation: 425843

Restricted substances and its chemical symbols

Unit

Lead

(Pb)

Mercury (Hg) Cadmium (Cd)

Hexavalent

chromium (Cr+6)

Polybrominated

biphenyls (PBB)

Polybrominated

diphenyl ethers

(PBDE)

PCBs

- ○ ○ ○ ○ ○

Metal Parts

- ○ ○ ○ ○ ○

Plastic Parts

○ ○ ○ ○ ○ ○

Speakers

- ○ ○ ○ ○ ○

Cables

- ○ ○ ○ ○ ○

Note 1:

“○” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value

of presence.

Note 2: The “−” indicates that the restricted substance corresponds to the exemption.

Please complete and retain for your records

The serial and model numbers are located on the bottom of the bass module.

Serial number: ____________________________________________________________________

Model number: ____________________________________________________________________

Please keep your receipt with your owner’s guide. Now is a good time to register your Bose product.

You can easily do this by going to http://global.Bose.com/register

Date of Manufacture: The eighth digit in the serial number indicates the year of manufacture; “9” is 2009 or 2019.

China Importer

: Bose Electronics (Shanghai) Company Limited, Part C, Plant 9, No. 353 North Riying Road, China

(Shanghai) Pilot Free Trade Zone

EU Importer: Bose Products B.V., Gorslaan 60, 1441 RG Purmerend, The Netherlands

Taiwan Importer: Bose Taiwan Branch, 9F-A1, No.10, Section 3, Minsheng East Road, Taipei City 104, Taiwan

Phone Number: +886-2-2514 7676

Mexico Importer: Bose de México, S. de R.L. de C.V. , Paseo de las Palmas 405-204, Lomas de Chapultepec, 11000

México, D.F. Phone Number: +5255 (5202) 3545

Input Rating: 100–240V 50/60Hz, 55W

6

|

ENG

LEGAL INFORMATION

Android, Google Play and the Google Play logo are trademarks of Google LLC.

The Bluetooth

®

word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such

marks by Bose Corporation is under license.

The terms HDMI, HDMI High-Deﬁnition Multimedia Interface, and the HDMI logo are trademarks or

registered trademarks of HDMI Licensing Administrator, Inc.

Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a

service mark of Apple Inc.

ADAPTiQ, Bose, Bose Bass Module, Bose Music, the Bose Music logo, Bose Soundbar, SoundTouch, the wireless note

design, and Virtually Invisible are trademarks of Bose Corporation.

Wi-Fi is a registered trademark of Wi-Fi Alliance

®

.

Bose Corporation Headquarters: 1-877-230-5639

prior written permission.

7

|

ENG

CONTENTS

WHAT’S IN THE CARTON

Contents ............................................................................................................................. 9

BASS MODULE PLACEMENT

Recommendations.......................................................................................................... 10

POWER

Connect the bass module to power ........................................................................ 11

CONNECT TO A SOUNDBAR

Choose your connection method ............................................................................. 12

Connect using the Bose Music app ......................................................................... 13

New to the Bose Music app? .............................................................................. 13

Connect using the SoundTouch 300 remote ....................................................... 14

Check for sound ...................................................................................................... 14

ADAPTIQ AUDIO CALIBRATION

Choose your audio calibration method .................................................................. 15

Run ADAPTiQ audio calibration using the Bose Music app ........................... 16

Initial setup ................................................................................................................ 16

Use the Settings menu ......................................................................................... 16

Run ADAPTiQ audio calibration using the SoundTouch 300 remote ........ 17

BASS SETTING

Choose your bass adjustment method .................................................................. 19

Adjust the bass using the Bose Music app ........................................................... 20

Adjust the bass using the SoundTouch 300 remote ........................................ 20

Reset the bass .......................................................................................................... 21

BASS MODULE STATUS

Status light ........................................................................................................................ 22

CONTENTS

8

|

ENG

CARE AND MAINTENANCE

Clean the bass module ................................................................................................. 23

Replacement parts and accessories ........................................................................ 23

Limited warranty ............................................................................................................. 23

TROUBLESHOOTING

Try these solutions ﬁrst ................................................................................................ 24

Other solutions ................................................................................................................ 24

Unable to complete ADAPTiQ audio calibration with your

SoundTouch 300 soundbar

........................................................................................ 26

Reset the connection to the soundbar ................................................................... 27

Reset the bass module ................................................................................................. 28

Connect using an audio cable ................................................................................... 29

9

|

ENG

WHAT’S IN THE CARTON

CONTENTS

Conﬁrm that the following parts are included:

Bose Bass Module 500 Power cord*

*May ship with multiple power cords. Use the power cord for your region.

NOTE: If any part of the product is damaged, do NOT use it. Contact your authorized

Bose dealer or Bose customer service.

Visit: worldwide.Bose.com/Support/BASS500

10

|

ENG

BASS MODULE PLACEMENT

RECOMMENDATIONS

For best performance, follow these recommendations when placing the bass module:

Do NOT place any objects on top of the bass module.

To avoid wireless interference, keep other wireless equipment 1 – 3 ft.

(0.3 – 0.9 m) away from the bass module. Place the bass module outside

and away from metal cabinets, other audio/video components and direct

heat sources.

Place the bass module on a stable and level surface. Vibration can cause the bass

module to move, particularly on smooth surfaces like marble, glass or highly

polished wood.

Place the bass module along the same wall as your TV, or along any other wall in

the front third of the room.

Keep the back side of the bass module (the side opposite the Bose logo) at least

3 in. (7.6 cm) from any other surface. Blocking the port on the bottom of this side

may aect acoustic performance.

For more bass, place the bass module closer to walls and corners. For less bass,

place the bass module further from walls and corners.

Make sure there is an AC (mains) outlet nearby.

CAUTION: Do NOT place the bass module on its top or sides when in use.

11

|

ENG

POWER

CONNECT THE BASS MODULE TO POWER

1. Connect the power cord to the b connector on the bass module.

POWER

2. Plug the other end of the power cord into an AC (mains) power outlet.

12

|

ENG

CONNECT TO A SOUNDBAR

CHOOSE YOUR CONNECTION METHOD

The way you connect the bass module depends on your soundbar. Choose your

connection method from the table below.

SOUNDBAR CONNECTION METHOD

Bose Soundbar 500 or

Bose Soundbar 700

Connect using the Bose Music app (see page 13).

NOTE:

If you can’t access or have trouble

connecting using the Bose Music app,

see “Troubleshooting” on page 24.

SoundTouch 300 soundbar

Connect using your s oundbar’s remote

(see page 14).

CONNECT TO A SOUNDBAR

13

|

ENG

CONNECT USING THE BOSE MUSIC APP

1. In the Bose Music app, from the My Bose screen, select your soundbar.

2. Tap the soundbar image in the bottom-right corner of the screen.

3. Tap Settings > Accessory Speakers > Add Bose Accessory Speakers.

Follow the app instructions.

New to the Bose Music app?

1. On your mobile device, download the Bose Music app.

2. Follow the app instructions.

CONNECT TO A SOUNDBAR

14

|

ENG

CONNECT USING THE SOUNDTOUCH 300 REMOTE

1. On your s oundbar’s remote, press the SoundTouch button e.

2. Press and hold k until the connectivity light l on the soundbar blinks white.

Once connected, you hear a tone. The light on the back of the bass module and

l on the soundbar glow white.

NOTES: Connecting may take several minutes.

If the bass module doesn’t connect to the soundbar, see “Troubleshooting”

on page 24.

Check for sound

NOTE: To avoid hearing distorted audio, turn o your TV speakers. Refer to your TV

owner’s guide for more information.

1. Power on your TV.

2. If you are using a cable/satellite box or other secondary source:

a. Power on this source.

b. If this source is connected to your TV, select the appropriate TV input.

3. Power on the soundbar.

You hear sound coming from the bass module.

NOTE: If you don’t hear sound from the bass module, see “Troubleshooting” on

page 25.

15

|

ENG

ADAPTIQ AUDIO CALIBRATION

After setting up the bass module and connecting with the soundbar, run ADAPTiQ

audio calibration for best acoustic performance. ADAPTiQ audio calibration

customizes the sound of the system to the acoustics of your listening area by taking

ﬁve audio measurements. To run an audio calibration, you need 10 minutes when the

room is quiet.

During ADAPTiQ audio calibration, a microphone on the top of the ADAPTiQ headset

(provided with the soundbar) measures the sound characteristics of your room to

determine optimal sound quality.

If you no longer have the ADAPTiQ headset, contact Bose customer service for a

replacement.

CHOOSE YOUR AUDIO CALIBRATION METHOD

The way you run ADAPTiQ audio calibration depends on your soundbar. Choose your

audio calibration method from the table below.

SOUNDBAR AUDIO CALIBRATION METHOD

Bose Soundbar 500 or

Bose Soundbar 700

Run ADAPTiQ audio calibration using the

Bose Music app (see page 16).

SoundTouch 300 soundbar

Run ADAPTiQ audio calibration using the

s oundbar’s remote (see page 17).

ADAPTIQ AUDIO CALIBRATION

16

|

ENG

RUN ADAPTIQ AUDIO CALIBRATION USING THE

BOSE MUSIC APP

Initial setup

After you connect the bass module to your soundbar, the Bose Music app prompts

you to run ADAPTiQ audio calibration. Follow the app instructions.

Use the Settings menu

If you later connect the optional Virtually Invisible 300 surround speakers or

Bose Surround Speakers, move the bass module or move any furniture, run ADAPTiQ

audio calibration to ensure optimal sound quality.

1. In the Bose Music app, from the My Bose screen, tap your soundbar.

2. Tap the soundbar image on the bottom-right corner of the screen.

3. Tap Settings > ADAPTiQ > Run ADAPTiQ.

4. Follow the app instructions.

ADAPTIQ AUDIO CALIBRATION

17

|

ENG

RUN ADAPTIQ AUDIO CALIBRATION USING THE

SOUNDTOUCH 300 REMOTE

1. Insert the ADAPTiQ headset cable into the a connector on the back of the

SoundTouch 300 soundbar.

ADAPTiQ

2. Put on the ADAPTiQ headset.

ADAPTIQ AUDIO CALIBRATION

18

|

ENG

3. On your remote, press the SoundTouch button e.

4. Press and hold f until the TV light g and the Bluetooth® light l on the soundbar

glow green.

ADAPTiQ audio calibration begins.

NOTE: If you don’t hear your language, press d and c on the navigation pad to

cycle through languages. To reset the language, press and hold f for

10 seconds.

5. Follow the voice prompts until the ADAPTiQ process is complete.

If you hear an error message and are unable to complete ADAPTiQ audio

calibration, see page 26.

6. Unplug the ADAPTiQ headset from the soundbar and store it in a safe place.

TIP: If you later connect the optional Virtually Invisible 300 surround speakers or

Bose Surround Speakers, move the bass module or move any furniture, run

ADAPTiQ audio calibration again to ensure optimal sound quality.

19

|

ENG

BASS SETTING

CHOOSE YOUR BASS ADJUSTMENT METHOD

The way you adjust the bass depends on your soundbar. Choose your bass adjustment

method from the table below.

SOUNDBAR BASS ADJUSTMENT METHOD

Bose Soundbar 500 or

Bose Soundbar 700

Adjust the bass using the Bose Music app

(see page 20).

SoundTouch 300 soundbar

Adjust the bass using your s oundbar’s remote

(see page 20).

NOTE:

For optimal sound quality for dialogue-only

programs, such as news and talk shows, enable

dialogue mode. For more information, refer to

the SoundTouch 300 owner’s guide.

Visit: global.Bose.com/Support/ST300

BASS SETTING

20

|

ENG

ADJUST THE BASS USING THE BOSE MUSIC APP

NOTE: You can only adjust the bass using the app if your bass module is connected to

the Bose Soundbar 500 or Bose Soundbar 700.

1. In the Bose Music app, from the My Bose screen, select your soundbar.

2. Tap the soundbar image in the bottom-right corner of the screen.

3. Tap Adjustments to adjust the bass.

ADJUST THE BASS USING THE SOUNDTOUCH 300

REMOTE

1. On the SoundTouch 300 remote, press h.

The lights on the soundbar glow according to the current bass setting.

ページを読み込んでいます...

Bose Smart Soundbar System 取扱説明書

関連論文

その他の書類