X5
V5.1
TC
EN
1PB
1Webcam Indicator
2Webcam
3Light sensor
4Microphone
5Display Panel
6Power Button
7Keyboard
8Touchpad
9Battery Indicator Button
10 Status Indicators
Bluetooth Indicator
Wireless Indicator
Drive Activity Indicator
Battery Charge Indicator
Power Indicator
Press the right button of touchpad to check the remaining battery power.Right click to show the remaining power percentage.
As shown below, the battery life indicator is available when the laptop is shut down, in stand-by or hibernation.(Battery mode)
<10%
>90%
51-70%
71-90%
11-30%
31-50%
109 8
7
6
5
4
3
2
1
Congratulations on your purchase of the AORUS Notebook !
This Manual will help you to get started with setting up your notebook. For more detailed information, please visit our website
at http://www.aorus.com. All specications are subject to the manufacturer's conguration at the time of shipping and may
change without prior notice,written or otherwise.
AORUS Notebook Tour
TC
EN
32
54321
321
7654
321
1Kensington Lock Slot
2Mini Display Port
3Thunderbolt 3.0 Port (USB type-C)
4USB 3.1 Port (USB type-C ,Gen 2)
5Headphone Output Jack Port
6Microphone Input Jack Port
7Speaker
1Speaker
2SD Card Reader
3USB 3.0 Port (USB type-A)
4USB 3.1 Port (USB type-A ,Gen 2)
5HDMI 2.0 Port
1Power (DC) Input Port
2USB 3.0 Port (USB type-A)
3Ethernet (LAN) Port
TC
EN
32
1Connect the power cord to the AC adapter.
2Connect the adapter to the Power (DC) Input Port on the back side of the notebook.
3Connect the power cord to the power outlet.
4While the Battery Indicator lights on, press the Power Button to turn on the notebook.
Using AORUS Notebook for the First Time
IMPORTANT
■
Ensure that your Notebook PC is connected to a grounded power adapter before turning it on for the rst time.
■
When using your Notebook PC on power adapter mode, the socket outlet must be near to the unit and easily accessible.
■
Locate the input/output rating label on your Notebook PC and ensure that it matches the input/output rating information
on your power adapter. Some Notebook PC models may have multiple rating output currents based on the available SKU.
■
Power adapter information：
Input voltage / Input frequency：100-240 Vac / 50-60 Hz
Rating output voltage / Rating output current：19.5 Vdc / 10.3 A
1
2
3
4
TC
EN
54
1Switching on the Power
A
fter you turn on the notebook for the very rst time, do not turn it o until the operating system has been
congured. Please note that the volume for the audio will not function until Windows® Setup has completed.
2Booting Up the notebook for the First Time
Depending on your conguration, the Microsoft® Windows® Boot Screen may be the rst screen that you
will see as the notebook starts up. Follow the on screen prompts and instructions and enter your personal
information to complete the setup of the Windows® Operating System.
WARNING
■Do not remove the built-in lithium battery. For any service needs, please contact your local AORUS Authorized
Service Center.
■Do not install the Notebook PC on a slant or a place prone to vibrations, or avoid using the Notebook PC in
that location for a long time.This increases the risk that a malfunction or damage to the product will occur.
■Do not store and use Notebook PC in direct sunlight or the location where temperatures exceed 112°F (45°C)
such as inside a vehicle.There is a danger of Lithium-ion battery expansion and aging.
■Do not use the Notebook PC in a badly ventilated location such as on bedding, on a pillow or cushion, etc, and
do not use it in a location such as room with oor heating as it may cause the computer to overheat.Take care
that the Notebook PC vents (on the side or the bottom) are not blocked especially in these environments. If
the vents are blocked, it may be dangerous and cause the Notebook PC to overheat.
TC
EN
54
X5 Operation Manual
Hardware Upgrade
User may upgrade memory or carry X5 to nearest repair center to upgrade; Please visit AORUS ocial website for
compatible memory brands.
CAUTION
■Please ensure X5 is not powered on and unplugged to power source before the upgrade. Any damage during
user’s upgrade will not be covered by warranty, and user shall be responsible for related repair cost; hence
recommend to carry your laptop to nearest service center for the upgrade.
■In order to maintain optimum compatibility and performance, please visit AORUS ocial website FAQ for the
supported memory module manufacturers, avoid compatibility problems or poor performance.
Battery Protection
When battery is in use for a period of time (not connected to power source and in high performance mode),Mass
power discharging on battery in a short period of time may cause battery to run at high temprature and may
shorten its lifespan. in order to protect the battery's lifespan, the battery will not be chargeable when its
temperature is higher than 45 ° C. The mechanism for this is to protect the battery life. However, after user
connects to power adapter, battery stops discharging and temperatures below is 45 ° C, the battery will start
charging back to the source and to maintain normal operation.Command & Control is a software that integrates
a list of basic settings to a single interface, providing user a faster and better experience when customization is
needed.
TC
EN
76
HotKeys
The computer employs hotkeys or key combinations to access most of the computer’s controls like screen
brightness and volume output. To activate hotkeys, press and hold the <Fn> key before pressing the other key in
the hotkey combination.
Hotkey Function Description
Maximize Fan Speed To increase the fan speed to 100%.
Sleep Put the computer in Sleep mode.
Wireless LAN Turn the Wireless LAN function ON and OFF.
Brightness Down Decrease the screen brightness.
Brightness Up Increase the screen brightness.
Display Toggle Switche display output between the display screen ,external monitor
(if connected) and both.
Screen Display Toggle Turn the screen display ON and OFF.
Speaker Toggle Turn the speaker ON and OFF.
Volume Down Decrease the sound volume.
Volume Up Increase the sound volume.
Touchpad Toggle Turn the internal touchpad ON and OFF.
WiFi / Bluetooth Toggle Turn the WiFi / Bluetooth function ON and OFF.
Webcam Turn the internal webcam ON and OFF.
Marco Key
Macro keys can be set via AORUS Fusion, setting combination keys for complicated and/or general operation.
Marco Key Function Description
Macro group Macro group switch, press around 3 secconds as hardware switch on/o.
Macro key 1 User self-denition Macro key.
Macro key 2 User self-denition Macro key.
Macro key 3 User self-denition Macro key.
Macro key 4 User self-denition Macro key.
Macro key 5 User self-denition Macro key.
+
+
+
+
+
+
+
+
+
+
+
+
+
TC
EN
76
Command & Control
Command & Control is a software that integrates a list of basic settings to a single interface, providing user a
faster and better experience when customization is needed.
Hotkey Function Description
OC Gauge
Easily do CPU / GPU overclocking with OC Gauge and close look to system info including:
CPU usage、GPU usage、memory usage、system temperature and fan speed.
Overclock Adjust CPU / GPU overclocking level.
Fan Control Adjust fan speed according to user's preference.
Quiet
System will try to lower the fan speed to increase the battery life and reduce the noise
without aecting light-weight tasks process such as using Word or 2D drawing.
Normal System will automatically adjust the fan speed upon your usage and try to keep
the noise down.
Gaming System will automatically adjust the fan speed upon your usage and have better
performance without losing stability.
Customize User can enjoy adjusting dierent maximum fan speed under "Auto Maximum"
or "Fixed Mode".
Deep
Control
Based on dierent temperature users can fully customize your own fan policy.
TC
EN
98
Hotkey Function Description
NV Control Panel Connet to NVIDIA control panel for more detail setting.
Do Not Disturb User can disable system update.
Volume Adjust volume.
Brightness Adjust Screen brightness.
Wi-Fi Turn ON or OFF Wi-Fi connection.
Bluetooth Turn On or O Bluetooth connection.
Power Mode Adjust the power plan by user usage in order to obtain maximum
battery life or performance.
Monitor Switch Switch between the computer screen and the external display video
output, or simultaneous display.
X-Rite Pantone
Color
Turn ON or OFF X-Rite Pantone Color.
Color Gerent
Adjust color temperature according to user. Also move the bar at bottom to adjust
the brightness of blue light which eases your eyestrain.
OSD Switch Enable/Disable the display of status while adjusting the settings
through keyboard hotkeys.
Charging Policy It enables users to select a Battery Setting that is optimized for specic
system usage patterns.
Standard Fully charges at a moderate rate.This setting provides a balanced battery life.
Set this mode as default is recommended.
Express Quickly charges for users who need the battery to charge quickly.
Quality Extends battery life by lowering charge.
Customize Advanced charges.User can select when the battery stops charging.
TC
EN
98
Thank you for choosing of AORUS notebook along with AORUS Fusion. AORUS Fusion is a gaming software which
combines the macro control, backlit control and sound eect control. With AORUS Fusion you can set up your
gaming environment in a second. You will always get ahead of your enemy in the preparation of war! Please read
following instruction of AORUS Fusion:
AORUS Fusion Overview
1Prole in use now
2Backlit control tab
3Key action tab (Macro setting)
4Setting tab
5Macro recording button
6AORUS Fusion setting selection
Including Restore Default & Fusion Update
7Stand-alone Macro Key
8Main keyboard
8
7
6
54321
AORUS Fusion
TC
EN
1110
Key Action
You can set macro on every key cap here. Just click the key you want to set macro and it will pop out the macro
assign page
1 . Shortcut page
1Current assigning key
2Common short-cut setting option
Default option is removing
21
TC
EN
1110
2 . Macro page
1Record new macro
Click it to enter if you want to record new macro
2Current available macro list
You can choose available macro here
2-1 . Record new macro
1Start recording macro
2Stop recording macro
3Macro name
you can set the name of macro here
4Import macro
5Record range
You can choose to record the key stroke, mouse
click, mouse movement or any combination of
them
6Delay time
You can set the record delay time here
7Macro execution way
You can set the execution way of macro here
8Export macro
21
8765
1 432
TC
EN
1312
3. Apps
1Choose the app you want to start with
the key
1
TC
EN
1312
Light Control
1G Key group, you can have ve dierent
group light at most
2Main keybaord area, you can select single
or multiple key to set the light
only under custom mode
3Animation list, you can select light eect
you want here
4Advanced setting of light eect, you can
set further light setting here
43
2
1
TC
EN
1514
Settings
1Choose the apps you want to run with
the prole
You can choose the app connected with the
prole. Once the app is launched, AORUS fusion
will automatically switch the keyboard to
connected prole
2Disable Windows key
3Clear assignments
Key action setting of this prole will be cleared
3
2
1
TC
EN
1514
Killer LAN can automatically adjust the priority of network transmission, allowing the user to have the best gaming
network speed, by eectively reducing ping values and gain sequence control over dierent softwares that require
network packet. User may set the software manually by Killer LAN's specic program with the highest priority
network packets; Moreover, user may also congure the network for the download priority for online videos and
games packets to achieve the best network optimization.
Killer LAN : Transmitting priority control
Now you can have full control of your network
transmittion. Killer Lan let you set the
priority of every apps connected. You don't
need to worry about the lag in game while
downloading les simultaneously. Kille Lan will
have the highest priority apps transmitting the
data through LAN and have lower priority apps
through WLAN. Stop the lag and fully utiilize
your bandwidth now!
Killer Doubleshot Pro
Killer Doubleshot Pro can combine the
bandwidth of LAN and WLAN. With Killer
Doubleshot Pro, you can have bigger
bandwidth on dealing with packet crowded
apps such as online game, online movie or BT
download. Just a simple click and start to enjoy
bigger bandwidth!
Killer LAN
TC
EN
1716
System Backup Guide
1Please plug in the USB disk which is at least 20GB in capacity to
make the original image (backup the data in USB rst. All data will be
eliminated during the creation of recovery USB disk)
2Insert the driver disk to your optical drive and run the install of
“System Backup” (for none-ODD model, please use USB ODD device or
download from http://www.aorus.com.)
3Run the “System Backup” after nishing the install.
4Select your USB disk from the drop-down list and start to create
the recovery USB disk.
5■The window will pop out when the creation of recovery disk is done.
■Please press F12 on starting the system when you need to restore the system. Select “boot from recovery
USB disk” and the system will be restored.
■The time needed for restore will be around 30 mins(time needed may vary by USB disk model) .
WARNING
■You can backup original recovery image through this application in case of losing by device damage.
■You can backup original recovery image to USB disk and restore the system if any storage system replacement
with the recovery USB disk.
■Before you restore the system through the recovery USB disk, please make sure that you have already made
the backup of your data.
■Please do not shut down or un-plug the system when performing backup through recovery USB disk.
>20G
TC
EN
1716
Recovery Guide
System Recovery (Restore your laptop operating system)
When something is going wrong with the laptop operating system, the storage of the laptop has a hidden
partition containing a full back up image of the operating system that can be used to restore the system to factory
default settings.
CAUTION
■If the storage has been switched or the partition deleted, the recovery option will no longer be available and a
recovery service will be needed.
■The recovery function is only available on devices with O/S preinstalled. Devices with DOS do not have the
recovery function.
Launch System Recovery
The system recovery feature is preinstalled before the laptop is shipped from the factory. The option menu allows
you to launch the Windows recovery tool to reinstall the operating system to factory default. The brief introduction
below will show you how to start the recovery tool and restore your system.
All ready to go
■Make sure your PC is plugged in. This will take a few minutes.
TC
EN
1918
3Choose “Troubleshoot” to enter the recovery settings.
(Also you can choose “Continue” to exit recovery system and continue to Windows 10 for les or data backup.)
There are two options for system recovery
■Reset this PC
You can choose to keep or remove your les and then reinstalls Windows without losing your les.
■AORUS Smart Recovery
Your PC settings will be restored to factory default settings.
Caution : All personal data and les will be lost.
Windows 10 Recovery Guide
1Turn o and restart the laptop.
2During the laptop turn on process,
press and hold F9 key to launch the tool.
4Choose “Reset this PC”
■Keep my les
Choose an account to continue.All apps will be removed, and settings will back to pure O/S
(without AORUS app), but your personal les will be kept.
■Remove everything
All apps, setting and personal les will be removed.
■Just remove my les
Only personal data and les will be removed, but computer settings will be kept.
■Fully clean the drive
The drive will be completely restored to factory default settings. It takes more time.
> [Click on “Reset” to execute recovery function.]
Here are what will happen
■All of your personal les and apps will be removed.
■Your PC settings will be restored to pure O/S (without AORUS app) .
TC
EN
1918
Choose “AORUS Smart Recovery”
The recovery will be activated and you will see the option buttons
on the window. Click on “Yes” to start it.
CAUTION
■Once the “Recovery” is selected, your personal data and files will be
deleted after the laptop starts restoring, and the operating system will
be reset to factory default settings.
■A progress indicator bar will show on the window when the recovery
process is running. Please make sure the AC-adapter is plugged in and
do not turn o the laptop.
After the system recovery is completed, you will see the option
button on the window, please click on “Shutdown”.
5Advanced options
System Restore
Use a restore point recorded on your PC to restore Windows.
System Image Recovery
Recover Windows using a specic system image le.
Startup Repair
Fix problems that keep Windows from loading.
Command Prompt
Use the Command Prompt for advanced trobleshooting.
UEFI Firmware Settings
Change settings in your PC’s UEFI rmware.
Startup Settings
Change Windows Startup behavior.
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
/