1
Volume control (VOL)
2
Hold switch (HOLD)
This function prevents the unit from
operating even if one of the buttons is
pressed in error. Use this function to
prevent the following situations:
A. While not in use, playback inadvertently
starts and the battery runs down.
B. Playback is interrupted while the unit is
in use.
To use this function, set the switch to
[HOLD].
Release [HOLD] before using the unit.
Reference:
The main unit and remote control each
have independent hold functions.
3
Earphones/remote control jack (
Ë
)
4
Tone control button (S-XBS)
To change the tone
S-XBS: Boosts the low frequency range.
Press during play so that
[
S-XBS
]
(
5
) lights.
To cancel, press again.(No indicator lights.)
5
Tone control indicator (S-XBS)
6
[OPR/BATT] indicator
7
Cassette holder open knob (OPEN)
8
Rewind, fast forward buttons
(REW, FF)
8
In the stop mode
Rewinds/Fast forwards the tape.
(REW:backwards) (FF: forwards)
In the play mode
You can skip backwards/forwards as many
programs as the number of times (up to 3)
the button is pressed (REW/FF TPS).
9
Play, change direction/stop button (
21
/
)
Press and hold to change the playback
direction in the play mode.
:
Rechargeable battery compartment
cover (See page 4.)
;
Connection terminals and holes for
battery case (See page 4.)
<
Volume control (VOLUME)
=
Hold switch (HOLD)
Release [HOLD] before using the remote
control.(See
2
)
>
Earphone jack
?
Main
(
play, change direction, stop
)
button
Press and hold to change the playback
direction.
@
Fast forward, Rewind dial (
i
,
j
)
In the stop mode
Rewinds/Fast forwards the tape.
(FF: forwards) (REW:backwards)
In the play mode
You can skip backwards/forwards as many
programs as the number of times (up to 3)
the button is turned (FF/REW TPS).
A B
Plug