ASROCK FATAL1TY B250M PERFORMANCE ユーザーマニュアル

Version 1.0

Published October 2016

Copyright Notice:

No part of this documentation may be reproduced, transcribed, transmitted, or

translated in any language, in any form or by any means, except duplication of

documentation by the purchaser for backup purpose, without written consent of

ASRock Inc.

Products and corporate names appearing in this documentation may or may not

be registered trademarks or copyrights of their respective companies, and are used

only for identication or explanation and to the owners’ benet, without intent to

infringe.

Disclaimer:

Specications and information contained in this documentation are furnished for

informational use only and subject to change without notice, and should not be

constructed as a commitment by ASRock. ASRock assumes no responsibility for

any errors or omissions that may appear in this documentation.

With respect to the contents of this documentation, ASRock does not provide

warranty of any kind, either expressed or implied, including but not limited to

the implied warranties or conditions of merchantability or tness for a particular

purpose.

In no event shall ASRock, its directors, ocers, employees, or agents be liable for

any indirect, special, incidental, or consequential damages (including damages for

loss of prots, loss of business, loss of data, interruption of business and the like),

even if ASRock has been advised of the possibility of such damages arising from any

defect or error in the documentation or product.

is device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

CALIFORNIA, USA ONLY

e Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance

controlled in Perchlorate Best Management Practices (BMP) regulations passed by the

California Legislature. When you discard the Lithium battery in California, USA, please

follow the related regulations in advance.

“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/

perchlorate”

ASRock Website: http://www.asrock.com

AUSTRALIA ONLY

Our goods come with guarantees that cannot be excluded under the Australian Consumer

Law. You are entitled to a replacement or refund for a major failure and compensation for

any other reasonably foreseeable loss or damage caused by our goods. You are also entitled

to have the goods repaired or replaced if the goods fail to be of acceptable quality and the

failure does not amount to a major failure. If you require assistance please call ASRock Tel

: +886-2-28965588 ext.123 (Standard International call charges apply)

e terms HDMI™ and HDMI High-Denition Multimedia Interface, and the HDMI

logo are trademarks or registered trademarks of HDMI Licensing LLC in the United

States and other countries.

Who knew that at age 19, I would be a World Champion PC gamer. When I was 13, I actually

played competitive billiards in professional tournaments and won four or ve games o guys

who played at the highest level. I actually thought of making a career of it, but at that young

age situations change rapidly. Because I’ve been blessed with great hand-eye coordination and

a grasp of mathematics (an important element in video gaming) I gravitated to that activity.

GOING PRO

I started professional gaming in 1999 when I entered the CPL (Cyberathlete Professional

League) tournament in Dallas and won $4,000 for coming in third place. Emerging as one

of the top players in the United States, a company interested in sponsoring me ew me to

Sweden to compete against the top 12 players in the world. I won 18 straight games, lost

none, and took rst place, becoming the number one ranked Quake III player in the world

in the process. Two months later I followed that success by traveling to Dallas and defending

my title as the world’s best Quake III player, winning the $40,000 grand prize. From there

I entered competitions all over the world, including Singapore, Korea, Germany, Australia,

Holland and Brazil in addition to Los Angeles, New York and St. Louis.

WINNING STREAK

I was excited to showcase my true gaming skills when defending my title as CPL

Champion of the year at the CPL Winter 2001 because I would be competing in a totally

dierent rst person shooter (fps) game, Alien vs. Predator II. I won that competition and

walked away with a new car. e next year I won the same title playing Unreal Tournament

2003, becoming the only three-time CPL champion of the year. And I did it playing a

different game each year, something no one else has ever done and a feat of which I am

extremely proud.

At QuakeCon 2002, I faced o against my rival ZeRo4 in one of the most highly

anticipated matches of the year, winning in a 14 to (-1) killer victory. Competing at Quakecon

2004, I became the World’s 1st Doom3 Champion by defeating Daler in a series of very

challenging matches and earning $25,000 for the victory.

Since then Fatal1ty has traveled the globe to compete against the best in the world, winning

prizes and acclaim, including the 2005 CPL World Tour Championship in New York City for

a $150,000 rst place triumph. In August 2007, Johnathan was awarded the rst ever Lifetime

Achievement Award in the four year history of the eSports-Award for “showing exceptional

sportsmanship, taking part in shaping eSports into what it is today and for being the prime

representative of this young sport. He has become the gurehead for eSports worldwide”.

Fatal1ty Story

LIVIN’ LARGE

Since my rst big tournament wins, I have been a “Professional Cyberathlete”, traveling the

world and livin’ large with lots of International media coverage on outlets such as MTV,

ESPN and a 60 Minutes segment on CBS to name only a few. It's unreal - it's crazy. I’m living

a dream by playing video games for a living. I’ve always been athletic and took sports like

hockey and football very seriously, working out and training hard. is discipline helps me

become a better gamer and my drive to be the best has opened the doors necessary to become

a professional.

A DREAM

Now, another dream is being realized – building the ultimate gaming computer, made

up of the best parts under my own brand. Quality hardware makes a huge difference in

competitions…a couple more frames per second and everything gets really nice. It’s all about

getting the computer processing faster and allowing more uid movement around the maps.

My vision for Fatal1ty hardware is to allow gamers to focus on the game without worrying

about their equipment, something I’ve preached since I began competing. I don’t want to

worry about my equipment. I want to be there – over and done with - so I can focus on

the game. I want it to be the fastest and most stable computer equipment on the face of the

planet, so quality is what Fatal1ty Brand products represent.

Johnathan “Fatal1ty” Wendel

e Fatal1ty name, Fatal1ty logos and the Fatal1ty likeness are registered trademarks of Fatal1ty, Inc., and are used

owners.

1

English

Fatal1ty B250M Performance Series

Motherboard Layout

Intel

B250

ATXPWR1

HDLE D R ESET

PLED PWR BTN

PANEL 1

1

COM1

1

B250M Performance

RoHS

CPU _FAN 1

PCIE1

TPM S1

1

USB3 _4

SPK_ CI1

1

PCIE2

CMOS

Battery

DDR4_A 2 (64 bit, 2 88-pin mod ule)

DDR4_A 1 (64 bit, 2 88-pin mod ule)

DDR4_B 2 (64 bit, 2 88-pin mod ule)

DDR4_B 1 (64 bit, 2 88-pin mod ule)

ATX1 2V 1

SATA3 _ 2

SATA3 _ 3

USB 3_ 5_6

SATA3 _ 4

SATA3 _ 5

CLRM OS1

1

HD_A UDI O1

M2_1

CT3CT4 CT2

Top:

RJ-45

HDMI1

CHA _FA N 1

Top:

LIN E IN

Cen te r:

FRO NT

Bot to m:

MIC I N

USB 3 .0

T: U SB3 _TA_ 1

B: US B3_ TC _1

PCIE4

SATA3 _ 1

CHA _FA N 2

Ultra M. 2

PCIe Gen 3 x4

PS2

Keyb oard

PS2

Mous e

DVI1

VGA1

USB 3 .0

T: US B3

B: US B4

CPU _FAN 2

Ct1

1

LPT1

1

USB5 _6

1

BIOS

ROM

M2_2

CT3CT4 CT2 Ct1

SATA3 _ 0

Optane Ready

PCIE3

USB 2 .0

T: U SB1

B: U S B2

FAT AL TY

1

RGB _HE AD ER1

1

2

English

No. Description

1 ATX 12V Power Connector (ATX12V1)

2 Chassis Fan Connector (CHA_FAN1)

3 CPU Fan Connector (CPU_FAN1)

4 CPU Fan Connector (CPU_FAN2)

5 2 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_B1)

6 2 x 288-pin DDR4 DIMM Slots (DDR4_A2, DDR4_B2)

7 AURA RGB LED Header (RGB_HEADER1)

8 ATX Power Connector (ATXPWR1)

9 USB 3.0 Header (USB3_5_6)

10 SATA3 Connector (SATA3_0)

11 SATA3 Connector (SATA3_1)

12 Chassis Fan Connector (CHA_FAN2)

13 SATA3 Connector (SATA3_2)

14 SATA3 Connector (SATA3_3)

15 SATA3 Connector (SATA3_5)

16 SATA3 Connector (SATA3_4)

17 Clear CMOS Jumper (CLRMOS1)

18 Chassis Intrusion and Speaker Header (SPK_CI1)

19 System Panel Header (PANEL1)

20 USB 2.0 Header (USB5_6)

21 USB 2.0 Header (USB3_4)

22 TPM Header (TPMS1)

23 Print Port Header (LPT1)

24 COM Port Header (COM1)

25 Front Panel Audio Header (HD_AUDIO1)

3

English

Fatal1ty B250M Performance Series

I/O Panel

No. Description No. Description

1 PS/2 Mouse Port 8 USB 2.0 Port (USB2)

2 D-Sub Port 9 USB 3.0 Ports (USB3_3_4)

3 LAN RJ-45 Port* 10 USB 3.0 Type-A Port (USB3_TA_1)

4 Line In (Light Blue)** 11 USB 3.0 Type-C Port (USB3_TC_1)

5 Front Speaker (Lime)** 12 HDMI Port

6 Microphone (Pink)** 13 DVI-D Port

7 Fatal1ty Mouse Port (USB1) 14 PS/2 Keyboard Port

* ere are two LEDs on the LAN port. Please refer to the table below for the LAN port LED indications.

Activity / Link LED Speed LED

Status Description Status Description

O No Link O 10Mbps connection

Blinking Data Activity Orange 100Mbps connection

On Link Green 1Gbps connection

ACT/LINK LED

SPEED LED

LAN Port

14 6712

13

5

4

1 3

9

2

11

10

8

4

English

** To congure 7.1 CH HD Audio, it is required to use an HD front panel audio module and enable the multi-

channel audio feature through the audio driver.

Please set Speaker Conguration to “7.1 Speaker”in the Realtek HD Audio Manager.

Function of the Audio Ports in 7.1-channel Conguration:

Port Funct ion

Light Blue (Rear panel) Rear Speaker Out

Lime (Rear panel) Front Speaker Out

Pink (Rear panel) Central /Subwoofer Speaker Out

Lime (Front panel) Side Speaker Out

How to Remove the I/O Cover?

Certain graphics cards with extra thickness of the back plate may collide with the pre-installed I/O cover.

Before installing such a wider graphics card, please loosen the screws to remove the I/O cover, as the picture

shown below.

1

2

5

English

Fatal1ty B250M Performance Series

Chapter 1 Introduction

ank you for purchasing ASRock Fatal1ty B250M Performance Series

motherboard, a reliable motherboard produced under ASRock’s consistently

stringent quality control. It delivers excellent performance with robust design

conforming to ASRock’s commitment to quality and endurance.

1.1 Package Contents

•

ASRock Fatal1ty B250M Performance Series Motherboard (Micro ATX Form Factor)

•

ASRock Fatal1ty B250M Performance Series Quick Installation Guide

•

ASRock Fatal1ty B250M Performance Series Support CD

•

2 x Serial ATA (SATA) Data Cables (Optional)

•

2 x Screws for M.2 Sockets (Optional)

•

1 x I/O Panel Shield

Because the motherboard specications and the BIOS soware might be updated, the

content of this documentation will be subject to change without notice. In case any

modications of this documentation occur, the updated version will be available on

ASRock’s website without further notice. If you require technical support related to

this motherboard, please visit our website for specic information about the model

you are using. You may nd the latest VGA cards and CPU support list on ASRock’s

website as well. ASRock website http://www.asrock.com.

6

English

1.2 Specications

Platform

•

Micro ATX Form Factor

CPU

•

Supports 7

th

and 6

th

Generation Intel® Core

TM

i7/i5/i3/

Pentium®/Celeron® Processors (Socket 1151)

•

Digi Power design

•

6 Power Phase design

•

Supports Intel® Turbo Boost 2.0 Technology

Chipset

•

Intel® B250

Memory

•

Dual Channel DDR4 Memory Technology

•

4 x DDR4 DIMM Slots

•

Supports DDR4 2400/2133 non-ECC, un-buered memory*

* 7

th

Gen Intel® CPU supports DDR4 up to 2400; 6

th

Gen Intel®

CPU supports DDR4 up to 2133.

•

Supports ECC UDIMM memory modules (operate in non-

ECC mode)

•

Max. capacity of system memory: 64GB

•

Supports Intel® Extreme Memory Prole (XMP) 2.0

•

15μ Gold Contact in DIMM Slots

Expansion

Slot

•

2 x PCI Express 3.0 x16 Slots (PCIE1: x16 mode; PCIE4: x4

mode)*

* Supports NVMe SSD as boot disks

•

2 x PCI Express 3.0 x1 Slots (Flexible PCIe)

•

Supports AMD Quad CrossFireX

TM

and CrossFireX

TM

•

15μ Gold Contact in VGA PCIe Slot (PCIE1)

Graphics

•

Intel® HD Graphics Built-in Visuals and the VGA outputs

can be supported only with processors which are GPU

integrated.

•

Supports Intel® HD Graphics Built-in Visuals : Intel® Quick

Sync Video with AVC, MVC (S3D) and MPEG-2 Full

HW Encode1, Intel® InTru

TM

3D, Intel® Clear Video HD

Technology, Intel® Insider

TM

, Intel® HD Graphics

•

Gen9 LP, DX11.3, DX12

7

English

Fatal1ty B250M Performance Series

•

HWAEncode/Decode: VP8, HEVC 8b, VP9, HEVC 10b (For

7

th

Gen Intel® CPU)

•

HWA Encode/Decode: VP8 , HEVC 8b; GPU/SWEncode/

Decode: VP9, HEVC 10b (For 6

th

Gen Intel® CPU)

•

Max. shared memory 1024MB

* e size of maximum shared memory may vary from dierent

operating systems.

•

ree graphics output options: D-Sub, DVI-D and HDMI

•

Supports Triple Monitor

•

Supports HDMI with max. resolution up to 4K x 2K

(4096x2160) @ 24Hz / (3840x2160) @ 30Hz

•

Supports DVI-D with max. resolution up to 1920x1200 @

60Hz

•

Supports D-Sub with max. resolution up to 1920x1200 @

60Hz

•

Supports Auto Lip Sync, Deep Color (12bpc), xvYCC and

HBR (High Bit Rate Audio) with HDMI Port (Compliant

HDMI monitor is required)

•

Supports HDCP with DVI-D and HDMI Ports

•

Supports Full HD 1080p Blu-ray (BD) playback with DVI-D

and HDMI Ports

Audio

•

7.1 CH HD Audio with Content Protection (Realtek ALC892

Audio Codec)

* To congure 7.1 CH HD Audio, it is required to use an HD

front panel audio module and enable the multi-channel audio

feature through the audio driver.

•

Premium Blu-ray Audio support

•

Supports Surge Protection (ASRock Full Spike Protection)

•

Nichicon Fine Gold Series Audio Caps

•

Supports Creative SoundBlaster Cinema3

LAN

•

Gigabit LAN 10/100/1000 Mb/s

•

Giga PHY Intel® I219V

•

Supports Wake-On-LAN

•

Supports Lightning/ESD Protection (ASRock Full Spike

Protection)

•

Supports Energy Ecient Ethernet 802.3az

•

Supports PXE

8

English

Rear Panel

I/O

•

1 x PS/2 Mouse Port

•

1 x PS/2 Keyboard Port

•

1 x D-Sub Port

•

1 x DVI-D Port

•

1 x HDMI Port

•

1 x USB 2.0 Port (Supports ESD Protection (ASRock Full

Spike Protection))

•

1 x Fatal1ty Mouse Port (USB 2.0) (Supports ESD Protection

(ASRock Full Spike Protection))

•

3 x USB 3.0 Type-A Ports (Supports ESD Protection (ASRock

Full Spike Protection))

•

1 x USB 3.0 Type-C Port (Supports ESD Protection (ASRock

Full Spike Protection))

•

1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED

LED)

•

HD Audio Jacks: Line in / Front Speaker / Microphone

Storage

•

6 x SATA3 6.0 Gb/s Connectors, support NCQ, AHCI and

Hot Plug*

* If M2_1 is occupied by a SATA-type M.2 device, SATA3_0 will

be disabled.

•

1 x Ultra M.2 Socket (M2_1), supports type

2230/2242/2260/2280 M.2 SATA3 6.0 Gb/s module and M.2

PCI Express module up to Gen3 x4 (32 Gb/s)**

•

1 x Ultra M.2 Socket (M2_2), supports type

2230/2242/2260/2280 M.2 PCI Express module up to Gen3

x4 (32 Gb/s)**

** If PCIE2 slot or PCIE3 slot is occupied, the PCIe-type M.2

device on M2_1 socket will run at Gen3 x2 (16 Gb/s).

** Supports Intel® Optane

TM

Technology (M2_2 only)

** Supports NVMe SSD as boot disks

** Supports ASRock U.2 Kit

Connector

•

1 x Print Port Header

•

1 x COM Port Header

•

1 x TPM Header

•

1 x Chassis Intrusion and Speaker Header

•

1 x AURA RGB LED Header

•

2 x CPU Fan Connectors (1 x 4-pin, 1 x 3-pin)

* e CPU Fan Connector supports the CPU fan of maximum

1A (12W) fan power.

9

English

Fatal1ty B250M Performance Series

•

2 x Chassis Fan Connectors (4-pin) (Smart Fan Speed Con-

trol)

* CHA_FAN1 and CHA_FAN2 can auto detect if 3-pin or 4-pin

fan is in use.

•

1 x 24 pin ATX Power Connector

•

1 x 8 pin 12V Power Connector

•

1 x Front Panel Audio Connector

•

2 x USB 2.0 Headers (Support 4 USB 2.0 ports) (Supports

ESD Protection (ASRock Full Spike Protection))

•

1 x USB 3.0 Header (Supports 2 USB 3.0 ports) (Supports

ESD Protection (ASRock Full Spike Protection))

BIOS

Feature

•

AMI UEFI Legal BIOS with multilingual GUI support

•

ACPI 6.0 Compliant wake up events

•

SMBIOS 2.7 Support

•

CPU, GT_CPU, DRAM, PCH 1.0V, VCCIO, VCCSA, VCCST

Voltage Multi-adjustment

Hardware

Monitor

•

CPU/Chassis temperature sensing

•

CPU/Chassis Fan Tachometer

•

CPU/Chassis Quiet Fan (Auto adjust chassis fan speed by

CPU temperature)

•

CPU/Chassis Fan multi-speed control

•

CASE OPEN detection

•

Voltage monitoring: +12V, +5V, +3.3V, CPU Vcore, DRAM,

PCH 1.0V

OS

•

Microso® Windows® 10 64-bit (For 7

th

Gen Intel® CPU)

•

Microso® Windows® 10 64-bit / 8.1 64-bit / 7 32-bit / 7 64-

bit (For 6

th

Gen Intel® CPU)

* To install Windows® 7 OS, a modied installation disk with

xHCI drivers packed into the ISO le is required. Please refer to

page 153 for more detailed instructions.

* For the updated Windows® 10 driver, please visit ASRock’s

website for details: http://www.asrock.com

Certica-

tions

•

FCC, CE, WHQL, RCM, BSMI

•

ErP/EuP Ready (ErP/EuP ready power supply is required)

* For detailed product information, please visit our website:

http://www.asrock.com

10

English

Please realize that there is a certain risk involved with overclocking, including

adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using

third-party overclocking tools. Overclocking may aect your system’s stability, or

even cause damage to the components and devices of your system. It should be done

at your own risk and expense. We are not responsible for possible damage caused by

overclocking.

11

English

Fatal1ty B250M Performance Series

is is a Micro ATX form factor motherboard. Before you install the motherboard,

study the conguration of your chassis to ensure that the motherboard ts into it.

Pre-installation Precautions

Take note of the following precautions before you install motherboard components

or change any motherboard settings.

•

Make sure to unplug the power cord before installing or removing the motherboard

components. Failure to do so may cause physical injuries and damages to motherboard

components.

•

In order to avoid damage from static electricity to the motherboard’s components,

NEVER place your motherboard directly on a carpet. Also remember to use a grounded

wrist strap or touch a safety grounded object before you handle the components.

•

Hold components by the edges and do not touch the ICs.

•

Whenever you uninstall any components, place them on a grounded anti-static pad or

in the bag that comes with the components.

•

When placing screws to secure the motherboard to the chassis, please do not over-

tighten the screws! Doing so may damage the motherboard.

Chapter 2 Installation

12

English

2.1 Installing the CPU

1. Before you insert the 1151-Pin CPU into the socket, please check if the PnP cap

is on the socket, if the CPU surface is unclean, or if there are any bent pins in the

socket. Do not force to insert the CPU into the socket if above situation is found.

Otherwise, the CPU will be seriously damaged.

2. Unplug all power cables before installing the CPU.

1

2

A

B

13

English

Fatal1ty B250M Performance Series

4

5

3

14

English

Please save and replace the cover if the processor is removed. e cover must be

placed if you wish to return the motherboard for aer service.

15

English

Fatal1ty B250M Performance Series

2.2 Installing the CPU Fan and Heatsink

1 2

CPU_

FAN

16

English

2.3 Installing Memory Modules (DIMM)

is motherboard provides four 288-pin DDR4 (Double Data Rate 4) DIMM slots,

and supports Dual Channel Memory Technology.

Dual Channel Memory Conguration

e DIMM only ts in one correct orientation. It will cause permanent damage to

the motherboard and the DIMM if you force the DIMM into the slot at incorrect

orientation.

Priority DDR4_A1 DDR4_A2 DDR4_B1 DDR4_B2

1 Populated Populated

2 Populated Populated

3 Populated Populated Populated Populated

1. For dual channel conguration, you always need to install identical (the same

brand, speed, size and chip-type) DDR4 DIMM pairs.

2. It is unable to activate Dual Channel Memory Technology with only one or three

memory module installed.

3. It is not allowed to install a DDR, DDR2 or DDR3 memory module into a DDR4

slot; otherwise, this motherboard and DIMM may be damaged.

ページを読み込んでいます...

ASROCK FATAL1TY B250M PERFORMANCE ユーザーマニュアル

関連論文

その他の書類