© 2005 Sony Corporation Printed in China
2-631-727-02(1)
SonicStage
USB Connect
SonicStage [ ] USB
Windows SonicStage
NO DATA FORMAT ERROR
English
Note on using
On the transfer
When you transfer audio files from your computer to the Network Walkman using
SonicStage, do not disconnect the USB cable while the icon above “USB Connect” on the
Network Walkman display is animating, or until “Transferred” changes to “–” in [Status] of
the SonicStage screen.
On the format
Be sure to format the built-in flash memory using the Menu mode on this unit. (Check all
contents before formatting as all data stored will be erased.)
If you format the built-in flash memory using Windows Explorer, “NO DATA” or “FORMAT
ERROR” may appear on this unit and any track may not play back, even if it is transferred
by SonicStage. In this case, format the built-in memory on this unit.
NW-E403/E405/E407
NW-E503/E505/E507
/