Function:
Operation Indicator:Turn the power switch of Voical MC-400 to the ON
position. If the green light keeps on, it means work as normal. As below
figure, if the red light keeps on, it means the battery is running out, please
replace the battery.
When the battery power is enough, the
indicator shown as green.
When the battery power is running low,
the indicator shown as red.
Sound Sensitive Indicator: When the sound level is normal, the indicator will
not light on. If the sound level is more loud, the indicator will flash as red.
But if the sound level is much more louder, the indicator will keep the red
light on.
When sound level is normal When sound level is more
loud
When sound level is much
more louder
Low Cut Function:Low Cut function is designed for reduce the background
noise, such as wind or other low frequency sound. Slide the button to Low
Cut position when under these environment.
Sound Volume Adjust: 3
steps sound adjustable switch on Voical MC-400.
-10dB: Switch to -10dB if the sound is very loud or rapid.
+10dB: Switch to +10dB if the sound is very small or far.
If the sound sensitive indicator haven't flash or on, just keep it on 0dB.
Voical MC-400 comes with wind resistant sponge which
can reduce the wind noise.
Voical MC-400 has a shock resistant mount
which can reduce the noise from the device to
microphone.
Shock Resistant Mount
In order to reduce the interference in sound recording, please keep your cell
phone or wireless device away from microphone at least 2 meters.
Thank you for purchasing Pixel product and read this instruction manual. If you have any
question, please contact your local dealer or visit http://www.pixelhk.com.
This information of this instruction manual is updated as of 25th July, 2013. For information on
the use of the combination of product marketed after this date, please contract Pixel's dealer
for advice.