Philips AC2936/33 ユーザーマニュアル

EN User manual 1 ZH-T 使用手冊 15

Original instruction by Philips

AC2936, AC2939

1EN

English

Contents

1. Your.air.purier.. ��2

Product overview ��2

Controls overview ��3

2 Getting started ��3

Installing the lter ��3

Wi-Fi indicator ��4

Wi-Fi connection ��4

3. Using.the.air.purier.. ��5

Air quality light ��5

Turning On and O ��6

Changing the mode setting ��7

Switching the display indicator �� 7

Using the light on/o function ��8

Setting the child lock ��8

Checking the lter status ��9

4 Cleaning and maintenance ��9

Cleaning the body of the air purier ��9

Cleaning the particle sensor ��9

Cleaning the surface of the lter ��10

Replacing the lter ��11

Filter reset ��12

5 Storage �� 12

6 Troubleshooting �� 12

2EN

1 Your air purifier

Congratulations on your purchase of air cleaner AC2936/AC2939.

To fully benet from the support that Philips oers, register your product at

www�philips�com/welcome�

Product overview

Control panel Air outlet

Back cover

NanoProtect lter Series

3 (FY2180/30)

Particle sensor

3EN

English

Controls overview

2 Getting started

Installing.the.lter

Note: Make sure the air purier is unplugged from the electrical outlet before installing the lter.

123 4 5

1 Pull the back cover and remove it from the appliance.

2 Pull the lter from the appliance.

3 Remove all packaging materials of the air purication lter.

4 Put the lter back into the appliance.

5 Reattach the back cover�

Wi-Fi indicator

Filter cleaning alert

Filter replacement alert

Filter status/ reset button

Power on/o button

Mode display:

Auto ( )

Turbo ( )

Gentle ( )

Sleep ( )

Display switch button

Mode switch button

Light on/o button

4EN

Wi-Fi indicator

Wi-Fi icon status Wi-Fi connection status

Blink in orange Connecting to the smartphone

Blink in white Connecting to the router

Stable in white Connected to the router

O Wi-Fi function disabled

Wi-Fi connection

Note:

• Corporate/Enterprise networks (e.g. certicates, network proles) are not supported. We

recommend setting up the Philips Air Puriers on a dedicated network created for IoT devices or

WPA2-Personal networks�

• Conguration details are provided in the Clean Home+ app (e.g. Mac address) to help set-up on

managed networks�

First time connection

1 Download and install the Philips “Clean Home+” app from the

App Store or Google Play�

2 Connect your smartphone or tablet to your Wi-Fi network�

3 Launch the “Clean Home+” app and click on “Connect a New Device” or press the

“+” button on the top of the screen. Follow the onscreen instructions to connect the

air purier to your network.

Reset the Wi-Fi connection

1 Touch and for 3 seconds until you hear a beep.

»The Wi-Fi indicator blinks orange�

2 Follow the steps 3 in “First time connection” section�

Note:

• Enterprise/Additional webpage authentication networks are not supported�

• Please check www.philips.com/cleanhome for the latest update of supported Operation System and

devices�

5EN

English

3 Using the air purifier

Air quality light

After approximately 30 seconds, the particle sensor selects the color that corresponds to the

surrounding air quality of airborne particles.

Note: The color of the air quality light is determined by the highest risk index among PM2.5, IAI and

readings�

IAI refers to the level of indoor air allergen.

IAI level Air quality light color Air quality level

1-3 Blue Good

4-6 Blue-purple Fair

7-9 Purple-red Poor

10-12 Red Very poor

PM2�5 refers to airborne particle pollutants smaller than 2.5 micrometers.

PM2�5 level Air quality light color Air quality level

≤12 Blue Good

13-35 Blue-purple Fair

36-55 Purple-red Poor

>55 Red Very poor

6EN

Turning.On.and.O

Note:

• Put the plug of the air purier in the power socket.

• If the purier stays connected to the electrical outlet after turning OFF, the air purier will operate under

the previous settings when turned ON again�

•Touch to switch on the air purier. •The “ ” displays on the screen during

warming up. Then the air purier shows

the IAI/PM2.5 level after measuring the air

quality�

3

s

•The air purier operates in the auto mode

with IAI displayed on the screen�

•Touch and hold the button for 3 seconds

to switch o the air purier.

7EN

English

Changing the mode setting

You can choose Auto mode, Turbo mode, Gentle mode or the Sleep mode by touching the button�

Auto mode ( ): The air purier

automatically adjusts the fan speed in

accordance with the ambient air quality�

Turbo mode ( )：The air purier

operates on the highest speed�

Gentle mode ( ): The air purier

operates at a low speed�

Sleep mode ( ): The air purier

operates quietly at a low speed. After

3 seconds, the screen lights o.

Switching the display indicator

Note:

• The appliance display IAI level by default.

8EN

Using.the.light.on/o.function

You can touch the light on/o button manually to turn o all lights and the control pa

nel� Touch any

button to wake up all lights�

With the light sensor:

• The control panel can automatically turn on, turn o or dim according to the ambient light.

• The control panel will be o or dim when the ambient light is dark.

You can touch any button to wake up all lights. If no further operation, all lights will be o or dim again

to match with the ambient light�

Setting the child lock

3s

+

3s

+

1 Touch and hold and button for 3 seconds to activate child lock.

» displays on the screen, only and button light up�

»After 3 seconds, the screen goes back to normal display.

2 Touch and hold and button for 3 seconds again to deactivate child lock.

» displays on the screen for 3 seconds and goes back to normal display.

»All buttons light up�

9EN

English

Checking.the.lter.status

• Touch the lter status check/reset button to check the lter service life status�

Icon color Display (%)

Blue 16-100

Blue-purple 9-15

Purple-red 4-8

Red 0-3

Note: The appliance goes back to normal display if no operations after 3 seconds.

4 Cleaning and maintenance

Note:

• Do not attempt to clean the particle sensor with a vacuum cleaner�

• Switch o the air purier and unplug from the power socket before following action.

Cleaning.the.body.of.the.air.purier

Use a soft, dry cloth to clean both the interior and exterior of the air

purier and the air outlet.

Cleaning the particle sensor

Clean the particle sensor every 2 months for optimal functioning of the appliance.

1 Clean the particle sensor inlet and outlet

with a soft brush.

2 Clean the particle sensor with a damp cotton

swab� Dry all parts thoroughly with a dry

cotton swab�

10 EN

Cleaning.the.surface.of.the.lter

Clean the surface of lter with vacuum cleaner when the lter

cleaning alert display on the screen�

1 Pull the back

cover and

remove it from

the appliance�

2 Pull the lter

from the

appliance�

3 Clean the

surface of

the lter with

a vacuum

cleaner�

4 Put the lter

back into the

appliance�

5 Reattach the

back cover�

3

s

6 Touch the button to

switch on the appliance�

7 Touch and hold the lter

status check/reset button

for 3 seconds to reset the lter

cleaning time�

8 Wash your hands

thoroughly after

cleaning the lter.

11EN

English

Replacing.the.lter

Note:

• The lter is not washable or reusable.

• Do not smell the lter as it has collected pollutants from the air.

When the lter need to be replaced, the lter replacement alert

lights up red�

1 Replace the lter with Philips NanoProtect lter Series 3 (FY2180/30) , Please follow the step of

Chapter “Installing the lter”.

3

s

2 Touch the button to

switch on the appliance�

3 Touch and hold the lter

status check/reset button

for 3 seconds to reset the

lter replacement time.

4 Wash your hands

thoroughly after

replacing the lter.

12 EN

Filter reset

You can also replace the lter before lter replacement alert ( ) displays on the screen. After

replacing a lter, you need to reset the lter lifetime counter manually.

3

s

+

1 Touch the power button

for 3 seconds to turn o the

appliance and unplug from

power socket�

2 Put the power plug in

the power socket�

3 Within 15 seconds after power

on, touch and hold and

button for 3 seconds to reset the

lter lifetime counter.

5 Storage

1 Turn o the air purier and unplug from the power socket.

2 Clean the air purier, particle sensor and the surface of the lter (see the chapter “Cleaning and

maintenance”)�

3 Let all parts air dry thoroughly before storing.

4 Wrap the lter in air tight plastic bags.

5 Store the air purier, lter in a cool, dry location.

6 Always thoroughly wash hands after handling lters.

6 Troubleshooting

This chapter summarizes the most common problems you could encounter with the appliance. If you

are unable to solve the problem with the information below, contact the Consumer Care Center in your

country�

Problem Possible solution

The appliance does not

work properly�

• The lter replacement alert has been on continuously but you have

not replaced the corresponding lter. As a result, the appliance is now

locked. In this case, replace the lter and long press to reset the lter

lifetime counter.

13EN

English

Problem Possible solution

The airow that comes

out of the air outlet is

signicantly weaker

than before.

• The surface of the lter is dirty. Clean the surface of the lter (see the

chapter “Cleaning and maintenance”)�

The air quality does not

improve, even though

the appliance has been

operating for a long

time�

• Check if the packing material is removed from the lter.

• The lter has not been placed in the appliance. Make sure that the lter

(FY2180/30) is properly installed�

• The particle sensor is wet� The humidity level in your room is high and

causes condensation� Make sure that the particle sensor is clean and dry

(see the chapter “Cleaning and maintenance”)�

• Room size is large or the outdoor air quality is poor�

For optimum purication performance, please close the doors and

windows when operating the air purier.

• There are indoor pollution resources. For instances, smoking, cooking,

incense, perfume or alchohol.

• Filter reaches the end of life. Replace the lter with a new one.

The color of the air

quality light always

stays the same�

• The particle sensor is dirty� Clean the particle sensor (see the chapter

“Cleaning and maintenance”)�

The appliance produces

a strange smell�

• The rst few times you use the appliance, it may produce a plastic smell.

This is normal. However, if the appliance produces a burnt smell even

if removing lters, contact your Philips dealer or an authorized Philips

service center. The lter may produce smell after being used for a while

because of the absorption of indoor gases. It’s recommended that you

reactivate the lter by putting it in direct sunlight for repeated use. If

odor still exists, replace the lter.

The appliance is extra

loud�

• It's normal if the appliance runs at the Turbo mode.

• In the Auto mode, if the appliance is too loud, maybe the appliance runs

at high speed because air quality becomes worse, or your personalized

setting in App triggers a higher fan speed. You can choose the Sleep

mode, or change the settings in the app.

• If anything drops into air outlet, it may also cause abnormal loud sound.

Immediate turn o appliance, turn appliance upside down, to get foreign

objectives out of appliance.

• If there is abnormal sound, contact the Consumer Care Center in your

country�

The appliance still

indicates that I need

to replace a lter, but I

already did�

• Perhaps you did not reset the lter lifetime counter. Switch on the

appliance� Then touch and hold the reset button ( ) for 3 seconds.

14 EN

Problem Possible solution

Error code “E1” displays

on the screen�

• The motor has malfunctions. Contact the Consumer Care Center in your

country�

The Wi-Fi setup is not

successful.

• If the router your purier is connected to is dual – band and currently it

is not connecting to a 2.4GHz network, please switch to another band

of the same router (2.4GHz) and try to pair your purier again. 5GHz

networks are not supported. If your purier is connected to a dual – band

router, please switch to the 2.4GHz network of the router and try to pair

your purier again.

• Web authentication networks are not supported�Public Wi-Fi such as

oce or hotel networks are not supported.

• Check if the purier is within range of the Wi-Fi router. You can try to

locate the air purier closer to the Wi-Fi router.

• Check if the Wi-Fi password is correct. The password is case-sensitive.

• Retry the setup with the instructions in section “Reset the Wi-Fi

connection”�

• Keep the appliance away from other electronic devices that may cause

interferences.

• Check if the mobile device is in airplane mode. Make sure to have the

airplane mode deactivated when connecting to the Wi-Fi network�

• If the Wi-Fi pairing fails after trying several times, please turn of the

cellular data on your smartphone in the Settings section and start the

pairing again�

• If the Wi-Fi icon on your purier’s display is in stable white but without

seeing the purier in your app, click on “Connect a New Device” and add

the purier from the local list on “Begin setup” page.

• Consult the help section in the app for extensive and up-to-date

troubleshooting tips�

15ZH-T

繁體中文

1 您的空氣清新機 ��16

產品概要 �� 16

控制鍵概覽 �� 17

2 使用入門 ��17

安裝濾網 �� 17

Wi-Fi 指示燈 �� 18

Wi-Fi 連接 �� 18

3 使用空氣清新機 ��19

空氣質素燈 �� 19

開關 �� 19

更改模式設定 �� 20

切換顯示指示燈 �� 21

使用開燈/關燈功能 �� 21

設定兒童安全鎖 �� 22

檢查濾網狀態 �� 22

4 清潔及保養 ��23

清潔空氣清新機機身 �� 23

清潔微粒感應器 �� 23

清潔濾網表面 �� 23

更換濾網 �� 24

重設濾網 �� 25

5 儲存 ��25

6 疑難排解 ��26

16 ZH-T

顯示模式：

自動 ( )

特強 ( )

柔風 ( )

睡眠 ( )

微粒感應器

1 您的空氣清新機

感謝您購買空氣清新機 AC2936/AC2939。

請前往以下網址註冊您的產品，以獲得 Philips 的完整支援： www�philips�com/welcome。

產品概要

控制面板排氣口

後蓋

納米級防護 S3 型濾網

(FY2180/30)

17ZH-T

繁體中文

控制鍵概覽

2 使用入門

安裝濾網

備註：安裝濾網前，請確保將空氣清新機的插頭從電源插座拔出。

1 2 3 4 5

1 拉起後蓋，從產品拆下。

2 從產品拉出濾網。

3 移除空氣淨化濾網的所有包裝物料。

4 將濾網裝回本產品。

5 重新裝上後蓋。

Wi-Fi 指示燈

清潔濾網提示

濾網更換警示

濾網狀態/ 重設按鈕

電源開/關按鈕

顯示模式：

自動 ( )

特強 ( )

柔風 ( )

睡眠 ( )

顯示切換按鈕

模式切換按鈕

開燈/關燈按鈕

18 ZH-T

Wi-Fi 指示燈

Wi-Fi 圖示狀態 Wi-Fi 連接狀態

閃爍橙色燈光正在連接智能電話

閃爍白色燈光正在連接路由器

穩定顯示白色燈光已連接至路由器

關閉 Wi-Fi 功能已停用

Wi-Fi 連接

備註：

• 不支援公司/企業網絡（例如憑證、網絡設定檔）。建議在為物聯網裝置而設的專用網絡或 WPA2-個人

網絡中設定 Philips 空氣清新機。

• Clean Home+ 應用程式提供配置資料（例如 Mac 位址），以協助在受管理網絡進行的設定。

首次連接

1 下載並安裝 Philips 「Clean Home+」應用程式，請前往

App Store 或 Google Play。

2 將您的智能手機或平板電腦連接至您的 Wi-Fi 網絡。

3 啟動「Clean Home+」應用程式，然後點擊「連接新裝置」或點按畫面頂部的「+」

按鈕。按照畫面上的指示，將空氣清新機連接至您的網絡。

重設 Wi-Fi 連線

1 同時按住和 3 秒，直至聽到「嗶」聲為止。

»Wi-Fi 指示燈閃爍橙色燈光。

2 請按照「首次連接」部分的步驟 3 操作。

備註：

• 不支援企業/其他網頁驗證網絡。

• 請瀏覽 www�philips�com/cleanhome，以了解支援作業系統和裝置的最新資料。

ページを読み込んでいます...