www.lg.com
版權所有 © 2023 LG Electronics Inc. 保留一切權利。
S77S
簡易手冊
無線
Sound Bar
WIRELESS SOUND BAR
2303_Rev01
COV37434424
ENGLISH
Specification
Power requirements
yRefer to the main label.
Power consumption
yRefer to the main label.
Dimensions (W x H x D): Approx. 890.0 mm x 61.5 mm x 126.0
mm
Bus Power Supply (USB): 5 V 0 500 mA
Amplifier (Total RMS Output power): 400 W RMS
IMPORTANT SAFETY NOTICE
The cord grip for the plug tted to this product is built into the
existing power cord as supplied. If, for any reason you need to
shorten the cord,
DO NOT RE-USE THE PLUG
A new plug must be used to ensure your continued safety by
securing the plug to the power cord in accordance with Plug &
Socket Regulations 1994.
Declaration of Conformity
Hereby, LG Electronics declares that the radio equipment type
Wireless Sound Bar is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at
the following internet address:
http://www.lg.com/global/support/cedoc/cedoc#
For consideration of the user, this device should be installed and
operated with a minimum distance of 20 cm between the device
and the body.
中文
規格
電源要求
y請參閱主標籤。
電源耗用
y請參閱主標籤。
尺寸（闊 x 高 x 深）: 大約 890.0 mm x 61.5 mm x 126.0 mm
匯流排電源供應 (USB): 5 V 0 500 mA
擴音器（RMS 總輸出功率）: 400 W RMS
安全注意事項
本機的插頭握柄是專爲本産品所設計,且與附
贈的電源線結合為一體,若您因爲任何理由而
需截短此電源線時
請勿再使用該插頭
應使用全新的插頭以確保連續使用之安全性。
請依據1994年之插頭及插座規範的規定,將插頭
確實地與電源線結合。
符合標準聲明
在此，LG電子聲明 無線Sound Bar 類型的無線電設備符合
2014/53/EU指令。你可以從以下互聯網地址獲得歐盟符合
性聲明的全文：
http://www.lg.com/global/support/cedoc/cedoc#
爲使用者安全着想，安裝或使用裝置時，身體與裝置之間
的距離不應少於 20 厘米。
S77S.CHKGLLK_SIMPLE (Sheet)_COV37434424.indd 1-5 2023-04-11 3:40:48
If you see a red LED on the wireless subwoofer, it means that the sound bar is not connected to the subwoofer. If this is the case, connect
them in the following order.
A Press the Power button on the sound bar to turn it off.
B Press the PAIRING button on the back of the disconnected wireless subwoofer. Check if LED blinks green.
-If you still see a red LED on the wireless subwoofer, press and hold the button on the back of the subwoofer again.
C Press the Power button on the sound bar to turn it on.
D When the connection is established, you will see a green LED light on the wireless subwoofer.
Keep the sound bar, the subwoofer away from the device (ex. wireless router, microwave oven, etc.) over 1 m to prevent wireless interference.
ySome speakers may not make sound depend on the input source. Select BASS BLAST (BASS BLAST+) sound mode to listen through all
speakers.
yDesign and specifications are subject to change without notice.
yGoogle Play is a trademark of Google LLC.
ENGLISH
Installing and Using the Product
Please read this manual carefully before operating your set and retain it for future reference.
To view the instructions of advanced features, visit http://www.lg.com or scan QR code and then download
Owner’s Manual. Some of the content in this manual may differ from your product.
A Sound bar
B Remote Control Receiver
C Status LED (
ABC
)
D Wireless Subwoofer - Install it close to the sound bar.
E External Device - (Blu-ray player, game console, etc.)
: On / : Off / : Blink
3
2
1
3
2
1
3
2
1
3
2
1
3
2
1
3
2
1
Red blinking White Blue blinking Blue White Purple
Power on
Power off
OPTICAL /
HDMI ARC Bluetooth ready Bluetooth HDMI IN USB
a Connect the sound bar to your TV via an optical cable or an HDMI cable.
b If you are using an external device (ex. Set-top box, Blu-ray player, game console, etc.), connect it to the sound bar or to the TV via
an HDMI cable.
If necessary, purchase HDMI cables, an optical cable, or a USB extension cable to connect the sound bar.
c Connect to power in the following order: wireless subwoofer [ sound bar. Then, turn on the sound bar. When the connection is
automatically established with the sound bar, the LED on the wireless subwoofer will light up green.
d Using the product with your TV
A Press the Function button repeatedly until LED1 lights up white. If you are using an external device that is connected to
HDMI™ IN on the sound bar, press the Function button repeatedly until LED3 lights up white.
B On your TV’s settings, set the output speaker to [HDMI ARC], [Optical], or [External Speaker].
e Connecting the product to your smartphone via Bluetooth
A Tap the Settings button on your smartphone and select Bluetooth. Turn on the Bluetooth function. ( Off >
On)
B Press the Bluetooth pair button. After a moment, LED2 blinks blue.
C Find and tap the product on your smartphone. The product appears as “LG S77S(XX)”.
D When the product is connected to your smartphone via Bluetooth, LED2 lights up blue.
f Connecting to the LG Sound Bar app
A Find and install the LG Sound Bar app on Google Play or App Store from your smartphone.
B You can get more information regarding its use by selecting [Help] in [Setting].
如果無線重低音揚聲器上的 LED 指示燈亮紅色，表示Sound Bar未連接至重低音揚聲器。若出現該情況，請依照以下順序進行連
接。
A 按下Sound Bar的電源 按鈕以關閉它。
B 按下中斷連線的無線重低音揚聲器背面的PAIRING按鈕。確認 LED 指示燈是否閃爍綠色。
- 如果無線重低音揚聲器上仍出現紅色 LED 指示燈，請再次長按重低音揚聲器背面的按鈕。
C 按下Sound Bar的電源 按鈕以開啟它。
D 建立連線後，無線重低音揚聲器上的 LED 指示燈會亮綠色。
請將Sound Bar、重低音揚聲器放置在離其他裝置（例如無線路由器、微波爐等等）超過 1 公尺的位置，以防止無線干擾。
y某些揚聲器可能因輸入來源而無法發聲。選擇 BASS BLAST (BASS BLAST+) 聲音模式以聆聽所有揚聲器。
y設計和規格若有更改，恕不另行通知。
yGoogle Play 是 Google LLC 的商標。
HDMI OUT
HDMI IN
(ARC)
HDMI IN OPTICAL
OUT
OPTICAL
IN
5 V 0 500 mA
HDMI IN
TM HDMI d TV
(eARC / ARC)
TM
a
b
D
a
A
B
C
b
E
1
2
3
更換電池
Replacement of Battery
中文
產品安裝及使用
操作設備前請仔細閱讀本手冊，並保留以備日後參考。
要檢視有關進階功能的指示，請造訪 http://www.lg.com 或掃描二維碼下載使用說明書。部份使用
說明的內容有可能與你的產品不同。
A Sound Bar
B 遙控接收器
C LED 指示燈狀態 (
ABC
)
D 無線重低音揚聲器 — 貼近Sound Bar安裝。
E 外置設備 — （藍光播放機、遊戲機等等）
: 開 / : 關 / : 閃爍
3
2
1
3
2
1
3
2
1
3
2
1
3
2
1
3
2
1
紅色閃爍 白色 藍色閃爍 藍色 白色 紫色
開啟
關機
OPTICAL /
HDMI ARC 藍牙 就緒 藍牙 HDMI IN USB
a 請用光纖線或 HDMI 線將Sound Bar連接至您的電視機。
b 如果您使用的是外部裝置（如機頂盒、藍光播放器、遊戲機等），透過 HDMI 連接線將其連接到Sound Bar或電視。
如有必要，請購買 HDMI 線纜、光纖或 USB 延長線來連接Sound Bar。
c 依照以下順序連接電源：無線重低音揚聲器 [ Sound Bar。接著，開啓Sound Bar：與Sound Bar自動建立連線後，無
線重低音揚聲器的 LED 指示燈亮綠色。
d 與您的電視機配合使用產品
A 重複按下功能 按鈕，直至 LED1 指示燈亮起白色。 如果您使用連接到Sound Bar上的 HDMI™ IN 的外部裝
置，請重複按下功能 按鈕，直到 LED3 指示燈亮起白色。
B 在電視的設定上，將輸出揚聲器設定為 [HDMI ARC]、[光纖] 或 [外部揚聲器]。
e 透過 藍牙 將設備連接至您的智能電話
A 輕觸您的智能電話內的設定 按鈕，選擇 藍牙。開啟 藍牙 功能。（ 關 > 開）
B 按下 藍牙 配對 按鈕。一段時間過後，LED2 指示燈會閃爍藍色。
C 於您的智能電話上找到並輕觸產品名稱。產品會顯示為「LG S77S(XX)」。
D 當產品透過 藍牙 連接到智能手機時，LED2 指示燈會亮起藍色。
f 連接至 LG Sound Bar 應用程式
A 從您智能電話的 Google Play 或 App Store 應用程式中，找到並安裝 LG Sound Bar 應用程式。
B 您可透過選擇 [設定] 內的 [幫助] 以獲得更多資訊。
S77S.CHKGLLK_SIMPLE (Sheet)_COV37434424.indd 6-10 2023-04-11 3:40:51
/