JA
EN
FR
DE
M MOUNT ADAPTER
Figure 1
qq
ww
a
ee
rr
tt
yu
AB
Figure 2
Figure 3
The X-Pro1
From rmware version 1.1, the X-Pro1 o ers image processing
tailored speci cally to M mount lenses attached using this adapter.
Users of earlier versions can download the latest rmware from
http://www.fujifilm.com/support/digital_cameras/software/#firmware
(if you do not have access to a computer, support is available from
the local distributor listed in the “FUJIFILM Worldwide Network”
material provided with your camera).
Notes on use
• The adapter increases the e ective focal length of the lens by about
1.5× (35mm format equivalent); for example, a focal length of
50mm increases to 75mm.
• The focus distance displayed by the lens may di er from the actual
focus distance.
• Do not attempt to use this product with incompatible lenses or
with other mount adapters. Failure to observe this precaution could
result in product malfunction or in damage to the camera, adapter,
or lens. Damage caused by ignoring this warning is not covered
under warranty.
• Do not drop or subject to strong physical shocks.
• Do not retract extendable lenses while they are mounted on the
camera body.
• Keep the signal contacts clean.
Speci cations
Dimensions: ø 59mm (2.3 in.) × L 14.7mm (0.6 in.)
Weight: Approx. 65g (2.3 oz.)
The Function Button
Pressing the function button displays image processing options.
More information is available at http://www.fujifilm.com/products/
digital_cameras/accessories/
The Gauge
The gauge is used to determine whether an M mount lens can be
used with the adapter. Refer to Figure 1 for the parts of the gauge.
1
Use part A to determine the diameter of the rear lens element
as shown in Figure 2. The lens can not be used if the diameter is
greater than the width of part A.
2
Rotate the lens focus ring to in nity and use part B to determine
how far the rear lens element projects from the back of the lens
as shown in Figure 3. The lens can not be used if the rear lens
element contacts part B.
Note: The gauge is intended as a guide only. Do not apply force to
lens elements or the lens body. Failure to observe this precaution
could damage the lens.
Information on supported lenses is available at http://www.fujifilm.com/
products/digital_cameras/accessories/
BL01743-100BL01743-100
ENGLISHENGLISH
Parts of the adapter (Figure 1)
q
Release button
w
Lens mount index
e
Camera mount index
r
Lens signal contacts
t
Function button
y
Rear lens cap
u
Gauge
Be sure to read these notes before use
• While every care has been taken to ensure that this product is safe,
read the instructions provided below to ensure that you use the
product correctly.
• After reading these instructions, be sure to keep them handy for
future reference.
The icons shown below are used in this document to indicate the
severity of the injury or damage that can result if the information
indicated by the icon is ignored and the product is used incorrectly
as a result.
WARNINGWARNING
This icon indicates that death or serious injury can result
if the information is ignored.
CAUTIONCAUTION
This icon indicates that personal injury or material
damage can result if the information is ignored.
The icons shown below are used to indicate the nature of the
instructions which are to be observed.
Triangular icons tell you that this information requires
attention (“Important”).
Circular icons with a diagonal bar tell you that the action
indicated is prohibited (“Prohibited”).
Filled circles with an exclamation mark indicate an action
that must be performed (“Required”).
WARNING WARNING
Do not view the sun through the lens or camera view nders. Failure
to observe this precaution can cause permanent visual
impairment.
Do not
disassemble
Do not disassemble (do not open the case). Failure to observe this
precaution can cause re, electric shock, or injury due to
product malfunction.
CAUTION CAUTION
Do not use or store in locations that are exposed to oil fumes, steam,
high humidity, or dust. Failure to observe this precaution can
cause re or electric shock.
Do not leave in direct sunlight or in locations subject to very high
temperatures, such as in a closed vehicle on a sunny day. Failure to
observe this precaution can cause re.
Keep out of the reach of small children. This product could cause
injury in the hands of a child.
When the product is not in use, replace the lens caps and store out of direct
sunlight. Sunlight focused by the lens can cause re or burns.
Do not touch the threads at the front or rear of the lens. The edges
could cause injury.
Cease use if the lens is damaged. Broken edges could cause
injury.
Attaching the adapter
1
Mount the adapter on the camera.
Keeping the camera mount index on the adapter aligned with
the mount index on the camera body, place the adapter on the
camera and rotate it clockwise until it clicks into place.
2
Attach a lens.
Keeping the mount index on the lens aligned with the lens mount
index on the adapter, place the lens on the adapter and rotate it
clockwise until it clicks into place.
Removing the adapter
1
Remove the lens.
Keeping the release button pressed to (a) in Figure 1, rotate the
lens counterclockwise.
2
Remove the adapter.
Pressing the camera lens release button, rotate the adapter
counterclockwise.
q
w
e
r
t
y
u
ページを読み込んでいます...
/