NZXT Kraken Elite 280 ユーザーマニュアル

KRAKEN ELITE

240MM / 280MM / 360MM LIQUID COOLER WITH LCD

ENGLISH

TABLE OF CONTENTS

1. COMPONENTS ................................... 02

3. INSTALLATION .................................06

2. HARDWARE INTRODUCTION .. 05 5. APPENDIX .......................................... A-1

4. DOWNLOADING NZXT CAM .... 27

VERSION 3.0

02

KRAKEN ELITE

A. Kraken Elite 240 / 280 / 360

x1

B. Intel retention bracket (pre-installed )

x1

C. AMD Retention Bracket

x1

D. Intel Backplate

x1

1. COMPONENTS

03

KRAKEN ELITE

COMPONENTS

E. Intel Socket 1200/115X Stando

x4

F. Intel Socket 1700 Stando

x4

G. AMD Stando

x4

H. AMD Sleeve

x4

I. 30mm UNC 6-32 fan screw

240 - x8, 280 - x8, 360 - x12

J. 5mm UNC 6-32 Screw

240 - x8, 280 - x8, 360 - x12

K. Washer

240 - x16, 280 - x16, 360 - x24

L. Thumbscrew

x4

AM4 AM5

04

KRAKEN ELITE

M. Breakout Cable Set

x1

N. F Series - Static Pressure Fan

240 - 120mmx2, 280 - 140mmx2, 360 - 120mmx3

COMPONENTS

05

KRAKEN ELITE

MBREAKOUT CABLE SET

M4. Fan splitter

M2. Pump SATA

Power Connector

M3. USB Connector

M1. Pump 3-Pin Connector

2. HARDWARE INTRODUCTION

06

KRAKEN ELITE

3. INSTALLATION

3.1 .........................................07

3.2 ............ 12

Installing The Pump-

Intel LGA 1700&1200/115X

Installing The Pump-

AMD Socket AM5, AM4, STRX4 & TR4 3.4 Powering The Pump & Fans ......................................... 21

3.3 Mounting The Radiator And Fans ........................... 18

07

KRAKEN ELITE

3.1 INSTALLING THE PUMP-INTEL LGA 1700&1200/115X

STEP 1

Move all four sliders on the Intel backplate to:

• the innermost positions for Socket 1200 / 115X

• the outermost positions for Socket 1700 D D

SOCKET 1200/115X SOCKET 1700

08

KRAKEN ELITE

D

3.1 INSTALLING THE PUMP-INTEL LGA 1700&1200/115X

STEP 2

Install the Intel backplate on the rear of the motherboard.

09

KRAKEN ELITE

STEP 3

From the front of the motherboard, install the four

Socket standoffs.

E F

or

3.1 INSTALLING THE PUMP-INTEL LGA 1700&1200/115X

10

KRAKEN ELITE

STEP 4

Orient the pump’s tube to fit your build.The display

orientation can be adjusted in 90° increment via CAM.

3.1 INSTALLING THE PUMP-INTEL LGA 1700&1200/115X

A

DEFAULT SOFTWARE ADJUSTABLE

11

KRAKEN ELITE

STEP 5

Place the pump with the retention bracket onto the CPU.

Ensure the standoffs go through the holes on the bracket

and apply the thumb nuts in the order as shown.

3.1 INSTALLING THE PUMP-INTEL LGA 1700&1200/115X

1

2

3

4

SOCKET 1700

SOCKET 1200 / 115X

A

L

12

KRAKEN ELITE

STEP 1

Remove the stock AMD mounting bracket and

keep the original backplate on the rear of the

motherboard.

FOR SOCKET TR4, PLEASE SKIP TO AMD - STEP 4

3.2 INSTALLING THE PUMP-

AMD SOCKET AM5, AM4, STRX4* & TR4*

13

KRAKEN ELITE

STEP 2

From the front of the motherboard, install the four AMD

sleeves. Make sure you use the right side of the sleeve .

H

3.2 INSTALLING THE PUMP-AMD SOCKET AM5, AM4, STRX4 & TR4

AM5 AM4

or

14

KRAKEN ELITE

STEP 3

From the front of the motherboard, install the four AMD

standoffs.

G

3.2 INSTALLING THE PUMP-AMD SOCKET AM5, AM4, STRX4 & TR4

15

KRAKEN ELITE

STEP 4 - CHANGING THE RETENTION BRACKET

1. Press and hold the Intel retention bracket ﬁrmly towards the pump.

2. Rotate the Intel retention bracket counterclockwise to release.

3. Pull out the Intel retention bracket.

4. Follow these steps in reverse order to install the AMD retention bracket onto the pump.

C

1. 2. 3. 4.

or

For SocketTR4, Install the AMD SocketTR4 retention bracket included inside the Threadripper CPU retail box.

3.2 INSTALLING THE PUMP-AMD SOCKET AM5, AM4, STRX4 & TR4

16

KRAKEN ELITE

STEP 5

Orient the pump’s tube to fit your build. We recommend

installing with the tubes exit at the 6 o'clock position. The

display orientation can be adjusted in 90° increment via

NZXT CAM.

A

3.2 INSTALLING THE PUMP-AMD SOCKET AM5, AM4, STRX4 & TR4

DEFAULT SOFTWARE ADJUSTABLE

17

KRAKEN ELITE

STEP 6

Place the pump with the retention bracket onto the CPU.

Ensure the standoffs go through the holes on the bracket

and apply the thumb nuts in the order as shown.

A

L

1

2

3

4

54MM

90MM

AMD SOCKET

90mm x 54mm AM5 / AM4

3.2 INSTALLING THE PUMP-AMD SOCKET AM5, AM4, STRX4 & TR4

18

KRAKEN ELITE

3.3 MOUNTING THE RADIATOR AND FANS

Depending on your radiator mounting setup,

please use the appropriate screws to mount the radiators:

• DIRECT MOUNTING

• INDIRECT MOUNTING

• Always use washers to prevent damage.

NOTE

19

KRAKEN ELITE

K

A

N

K

I

J

DIRECT MOUNTING

For mounting in which the radiator fits directly onto

the case, please install the fan(s) first using the 30mm

fan screws and washers. Use the 5mm case screws and

washers to mount the radiator.

3.3 MOUNTING THE RADIATOR AND FANS

ページが読み込まれています...

NZXT Kraken Elite 280 ユーザーマニュアル

このマニュアルも適しています

NZXT Kraken Elite 280 ユーザーマニュアル

他の言語で

関連論文

その他のドキュメント