When turning on the power while a recorded track is being
selected (the LOOP/ONE SHOT indicator is lit), the indicators
on the front panel flash in a sequential order, and the LOOP/
ONE SHOT indicator flashes rapidly for a few seconds.
Turning off the power while the LOOP/ONE SHOT indi-
cator is still flashing rapidly may result in the loss of all
saved data.
Never turn off the power while the LOOP/ONE SHOT
indicator is flashing rapidly.
To avoid problems, select an empty phrase track whenever
possible before turning the power on/off.
■ Caution when turning off the power
Before you turn off the power (disconnect the plug from the
OUTPUT jack), make sure that all of the following condi-
tions are satisfied.
All saved data may be lost if the power is turned off
inappropriately.
●
You must not be recording/playing/overdubbing a phrase
(The REC/PLAY/DUB indicators must not be lit)
● The MODE knob is set to either AUTO, , or
●
The LOOP/ONE SHOT indicator is not flashing rapidly
Copyright © 2006 BOSS CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without
the written permission of BOSS CORPORATION.
NOTES
RC-2_Notes_e1 1 ページ ２００６年８月８日 火曜日 午後２時３分
