Optimus AM-1B EB ユーザーマニュアル

INSTRUCTION MANUAL

REAL-TIME STEERING ARRAY MICROPHONES

AM-1B

AM-1W

Thank you for purchasing TOA’s Real-Time Steering Array Microphone.

Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.

English : page 1

: 27

: 5 1

日本語 : 75 ページ

2

TABLE OF CONTENTS

1. SAFETY PRECAUTIONS

............................................................................. 3

2. ABOUT INSTRUCTION MANUALS ...................................................... 4

3. GENERAL DESCRIPTION .......................................................................... 5

4. FEATURES ............................................................................................................ 5

5. HANDLING PRECAUTIONS ...................................................................... 5

6. NOMENCLATURE AND FUNCTIONS ................................................. 6

6.1. Array Microphone .................................................................................................. 6

6.2. Control Unit ........................................................................................................... 7

7. CONNECTION ..................................................................................................... 8

7.1. System Application Examples ............................................................................... 8

7.2. Connecting the AC adapter ................................................................................... 8

7.3. Network Connections ............................................................................................ 9

7.4. Removable Terminal Plug Connection .................................................................. 9

8. INSTALLING THE CONTROL UNIT .................................................... 10

8.1. Rack Mounting .................................................................................................... 10

8.2. Wall Mounting ..................................................................................................... 11

9. EQUIPMENT SETTINGS ............................................................................ 12

9.1. Audio Output Selection ........................................................................................ 12

9.2. Tone Settings ...................................................................................................... 12

10. SYSTEM SETTINGS ................................................................................... 13

10.1. System Settings Summary ................................................................................ 13

10.2. System Requirements ....................................................................................... 13

10.3. iPad

®

Settings ................................................................................................... 14

10.4. Settings Using Web Browser ............................................................................ 16

11. STARTING THE SYSTEM IN TEST MODE .................................. 21

12. TROUBLESHOOTING ............................................................................... 23

13. SPECIFICATIONS ........................................................................................ 24

Accessory ................................................................................................................. 25

Optional products ...................................................................................................... 25

Notes

• WindowsandInternetExploreraretheregisteredtrademarksofMicrosoftCorporationintheUnitedStates

and other countries.

• iPadandiPhoneareregisteredtrademarksofAppleInc.

• GoogleChromeisatrademarkofGoogleInc.

• Regardingothercompanynamesandproducts,theyarealsotrademarksofindividualcompanies.

3

1. SAFETY PRECAUTIONS

• Beforeinstallation oruse,besure tocarefullyread alltheinstructionsin thissectionfor correctandsafe

operation.

• Besuretofollowalltheprecautionaryinstructionsinthissection,whichcontainimportantwarningsand/or

cautions regarding safety.

• Afterreading,keepthismanualhandyforfuturereference.

Safety Symbol and Message Conventions

Safety symbols and messages described below are used in this manual to prevent bodily injury and property

damage which could result from mishandling. Before operating your product, read this manual rst and

understand the safety symbols and messages so you are thoroughly aware of the potential safety hazards.

When Installing the Unit

• Donotexposetheunittorainoranenvironmentwhereitmaybesplashedbywaterorotherliquids,asdoing

somayresultinreorelectricshock.

• Usetheunitonlywiththevoltagespeciedontheunit.Usingavoltagehigherthanthatwhichisspecied

mayresultinreorelectricshock.

• Donotcut,kink,otherwisedamagenormodifythepowersupplycord.Inaddition,avoidusingthepowercord

in close proximity to heaters, and never place heavy objects -- including the unit itself -- on the power cord,

asdoingsomayresultinreorelectricshock.

• Avoidinstallingormountingtheunitinunstablelocations,suchasonaricketytableoraslantedsurface.

Doingsomayresultintheunitfallingdownandcausingpersonalinjuryand/orpropertydamage.

• Sincetheunitisdesignedforindooruse,donotinstallitoutdoors.Ifusedoutdoors,thereisadangerof

electric shock when it gets wet with rain.

• Donotuseothermethodsthanspeciedtomountthebracket.Extremeforceisappliedtotheunitandthe

unit could fall off, possibly resulting in personal injuries.

• Usethespeciedrackmountingbracketincombination.Doingotherwisemaycausetheunitorcomponent

to fall off, resulting in personal injury.

When the Unit is in Use

• Shouldthefollowingirregularitybefoundduringuse,immediatelyswitchoffthepower,disconnectthepower

supply plug from the AC outlet and contact your nearest TOA dealer. Make no further attempt to operate the

unitinthisconditionasthismaycausereorelectricshock.

· Ifyoudetectsmokeorastrangesmellcomingfromtheunit.

· Ifwateroranymetallicobjectgetsintotheunit

· Iftheunitfalls,ortheunitcasebreaks

· Ifthepowersupplycordisdamaged(exposureofthecore,disconnection,etc.)

· Ifitismalfunctioning(notonesounds.)

• Topreventareorelectricshock,neveropennorremovetheunitcaseastherearehighvoltagecomponents

insidetheunit.Referallservicingtoqualiedservicepersonnel.

• Donotplacecups,bowls,orothercontainersofliquidormetallicobjectsontopoftheunit.Iftheyaccidentally

spillintotheunit,thismaycauseareorelectricshock.

Indicatesapotentiallyhazardoussituationwhich,ifmishandled,could

result in death or serious personal injury.

WARNING

4

Indicatesapotentiallyhazardoussituationwhich,ifmishandled,could

resultinmoderateorminorpersonalinjury,and/orpropertydamage.

CAUTION

When Installing the Unit

• NeverpluginnorremovethepowersupplyplugoftheACadapterwithwethands,asdoingsomaycause

electric shock.

• Whenunpluggingthepowersupplycord,besuretograspthepowersupplyplugoftheACadapter;neverpull

onthecorditself.Operatingtheunitwithadamagedpowersupplycordmaycauseareorelectricshock.

• Whenmovingtheunit,besuretoremovethepowersupplyplugoftheACadapterfromthewalloutlet.Moving

theunitwiththepowercordconnectedtotheoutletmaycausedamagetothepowercord,resultinginreor

electric shock. When removing the power cord, be sure to hold its plug to pull.

• Avoid installing the unit in humid or dusty locations, in locations exposed to the direct sunlight, near the

heaters,orinlocationsgeneratingsootysmokeorsteamasdoingotherwisemayresultinreor electric

shock.

• Besuretofollowtheinstructionsbelowwhenrack-mountingtheunit.Failuretodosomaycauseareor

personal injury.

· Install theequipment rackon astable,hard oor.Fixit withanchorboltsor takeother arrangementsto

prevent it from falling down.

· When connecting the AC adapter’s power cord to an AC outlet, use the AC outlet with current capacity

allowable to the unit.

· Thesuppliedrack-mountingscrewscanbeusedfortheTOAequipmentrackonly.Donotusethemforother

racks.

When the Unit is in Use

• UsethespeciedACadapterfortheunit.Notethattheuseofotheradaptermaycauseare.

• IfdustaccumulatesonthepowersupplyplugorinthewallACoutlet,aremayresult.Cleanitperiodically.

Inaddition,insertthepluginthewalloutletsecurely.

• Switchoffthepower,andunplugthepowersupplyplugfromtheACoutletforsafetypurposeswhencleaning

orleavingtheunitunusedfor10daysormore.Doingotherwisemaycauseareorelectricshock.

2. ABOUT INSTRUCTION MANUALS

Please refer to two different instruction manuals to properly setup and operate this product.

Unit installation

Network settings

Array microphone settings by PC

Array microphone settings by iPad app

Instruction Manual

(This manual)

Software Instruction Manual

(Download from website)

Note

Please downloadthelatestSoftwareInstructionManualfromtheTOAProductDataDownloadSite(http://www.

toa-products.com/international/).

5

3. GENERAL DESCRIPTION

TheAMSeriesisaReal-timeSteeringArrayMicrophonethatefcientlypicksuptargetedsoundbyusinga

unique algorithm to detect the position of the sound source and control the microphone’s directivity.

This microphone system consists of an array microphone unit and its control unit. The array microphone is

availableintwodifferentversions:AM-1B(black)andAM-1W(white).

4. FEATURES

• Thearraymicrophoneutilizeseightmicrophoneelementstorealizeanarrayeffectbymeansofitsnarrow50°

horizontal angle of directivity.

• The microphone employs a unique algorithm to detect and track the position of the sound source and

automatically control the directivity of the array microphone in real time so that the targeted sound can be

efcientlypickedup.

• Thefree-to-download,dedicatedAM-1iOSappallowsnotonlyvisualmonitoringofsoundsourcedetection

conditions,butalsoeasyfunctionsettings.FunctionsettingscanalsobeperformedbywayofaPCbrowser.

• Thearraymicrophonecanbemutedbywayofitsmuteswitchorsoftwarecontrol(viatheAM-1iOSapp).

5. HANDLING PRECAUTIONS

• Warning: ThisisaclassAproducts.Inadomesticenvironmentthisproductmaycauseradiointerferencein

which case the user may be required to take adequate measures.

• Note: This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuanttoPart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonableprotection

against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause harmful interference to radio

communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which

case the user will be required to correct the interference at his own expense.

• Theuserthatchangesormodicationsnotexpresslyapprovedbythepartyresponsibleforcompliancecould

void the user's authority to operate the equipment.

• Avoidblockingthearraymicrophonewiththehandorotherobjectsthatmayrestrictthemicrophone’soptimal

performance.

• Whenmountingthecontrolunitinarack,peripheralareasaroundpoweramplierscouldexceedtheoperating

temperaturespeciedfortheunit.Avoidinstallingthecontrolunitincloseproximitytopowerampliers.

• Takecarenottodroptheunitontotheoororbumpitagainstahardobjectastheunitcouldfail.

• Avoidusingamobiletelephonenearthisunitsinuse.Noisecouldbepickedup.

• Toclean,besuretorstcutoffpowertotheunit,thenwipewithadrycloth.

When the unit gets very dirty, use a cloth damped in a neutral cleanser. Never use benzene, thinner or

chemically-treated cleaning cloth because such volatile liquids could deform or discolor the unit.

6

6. NOMENCLATURE AND FUNCTIONS

6.1. Array Microphone

[Top]

1. Microphone section

Eight microphone elements are housed within the

main body of the microphone.

Note

To ensure optimal microphone performance, never

cover the microphone section with your hand or

other objects that may interfere with sound input.

2. Microphone cable (with TA-3 connector)

Connect this cable to the control unit’s microphone

input terminal.

3. Microphone status indicator (green/red)

Indicates the microphone status when the array

microphone is connected to the control unit.

PowerOFF: Unlit

PowerON: Green

Microphone muted: Red

4. Mute switch

Used to mute the sound input from the array

microphone.

MUTE

7

6.2. Control Unit

[Front]

REAL-TIME STEERING ARRAY MICROPHONE

SIGNAL MUTE POWER

1. Power switch

The power is turned ON and OFF each time the

button is pressed.

2. Power indicator (Blue)

Lights when the power is ON.

3. MAC address

The control unit’s MAC address.

A 12-digit alphanumeric character string separated

by hyphens.

4. Signal indicator (Green)

Lights when an audio signal is being output.

Unlit while mute is enabled.

5. Mute indicator (Red)

Lights when the audio output is muted.

[Rear]

HE

C

3

1 2

CE

H

2

1 3

GND

SIGNAL

+

4dBu

-

50dBu

-

10dBV

OFF ON

OUTPUT LEVEL LOW-CUT

EH C

LNK ACT

MIC INPUTLAN OUTPUT

24V 410mA

DC INPUT

6. Function grounding terminal

Hum noise may be generated when external

equipment is connected to the unit.

Connecting this terminal to the functional ground

terminal of the external equipment may reduce the

hum noise.

Note: This terminal is not for protective ground.

7. Cord clamp

Holds and secures the power cord to prevent the

DCplugfromdetaching.

8. Power input terminal

ConnectstotheoptionalAD-246ACAdapterorthe

equivalent. As for the usable adapter, consult your

TOA dealer.

9. Network connection terminal (RJ45 jack)

Connects to a 10BASE-T or 100BASE-TX compati-

ble network.

LNKLED: Lights when connected to

the network.

ACTLED: Lights during communica-

tions.

10. Microphone input terminal (TA-3 connector)

Connect the array microphone’s cable to this

terminal.

Donotconnectanyotherequipment.

11. Audio output terminal (Removable terminal

block)

Connect wire leads from this terminal to the audio

inputterminalofamixeroramplier.

H:Hot,C:Cold,E:Earth(shield)

12. Audio output connector (XLR-3-32 connector)

Connect this terminal to the audio input terminal

ofamixeroramplier.

13. Output level selection switch

Switches the audio output level.

Switchoverlevels:−50dB*

1

/−10dB*

2

/+4dB*

1

14. Low frequency cutoff switch

Turn this switch ON if low frequency response is

to be reduced.

*

1

0 dB

=

0.775 V

*

2

0 dB

=

1 V

LNK ACT

8

7. CONNECTION

7.1. System Application Examples

HE

C

3

1 2

CE

H

2

1 3

GND

SIGNAL

+

4dBu

-

50dBu

-

10dBV

OFF ON

OUTPUT LEVEL LOW-CUT

EH C

LNK ACT

MIC INPUTLAN OUTPUT

24V 410mA

DC INPUT

Switching hub

iPad

Array microphone

PC

Control unit

[Rear panel]

Wi-Fi router

To mixer or amplifier

MUTE

AC adapter

AD-246 (option)

or the equivalent

CE

H

2

1 3

GND

SIGNAL

H C

LNK ACT

MIC INPUTLAN

24V 410mA

DC INPUT

Cord clamp

AC adapter AD-246

(option)

Control unit

7.2. Connecting the AC adapter

ConnecttheACadapter*tothecontrolunit’spowerinputterminal.Securethecordwithclamp.

*

UsetheoptionalACadapterAD-246orequivalent.Foralternateadapters,consultyourTOAdealer.

ForACadapters, use TOAoptional AD-

246 Adapter or the equivalent. The use of

other adapters could result in fire or other

possible damage.

CAUTION

9

HE

C

3

1 2

CE

H

2

1 3

GND

SIGNAL

+

4dBu

-

50dBu

-

10dBV

OFF ON

OUTPUT LEVEL LOW-CUT

EH C

LNK ACT

MIC INPUTLAN OUTPUT

24V 410mA

DC INPUT

To switching hub

Control unit

7.3. Network Connections

The control unit automatically distinguishes between 10BASE-T and 100BASE-TX networks and establishes a

connection.Forthisconnection,useastraightUTPCategory5orgreaterLAN(Ethernet)cableterminatedwith

an RJ45 connector.

7.4. Removable Terminal Plug Connection

Please use the removable terminal plugs supplied with the control unit to connect the audio output terminal by

following the instructions below.

• Besuretouseshieldedcablesforaudiosignallines.

• Avoidsolderingcableconductor,ascontactresistancemayincreasewhenthecableistightenedandthe

solder is crushed, possibly resulting in an excessive rise in joint temperatures.

• UsecablesofAWG12–24.

20 mm

(0.79")

7 mm

(0.28")

[Cable end treatment]

Shielded cable

[Terminal plug connections]

Step 1. Loosen the terminal screw, then insert the cable.

Step 2. Retightentheterminalscrew.(Pullonthecable

toensureitissecurelyconnected.)

Step 3. Secure the plug and cable with a cable tie or

other appropriate band to prevent the cable from

coming loose.

Step 4. Inserttheplugintotheaudiooutputterminal.

Tip

Recommended slotted screwdriver type: Screwdriver

withbladethatis3mm(0.12")inwidth

Tightens

Terminal screw

Slotted screwdriver

Shielded cable

1

2

Removable

terminal plug

Hot

Cold

Earth

Loosens

3

Cable tie

Bit shape

3 mm (0.12")

10

3 x 8 tapping screw *

1

Rack mounting bracket *

1

Blank bracket *

1

Fiber washer (for M5)*

1

5 x 12 rack mounting screw *

1

3 x 14 tapping screw *

1

3 x 8 tapping screw *

1

Control unit

*

1

Component parts of MB-15B-BK

*

2

Component parts of MB

-

15B

-

J

Control unit

3 x 14 tapping screw *

2

3 x 14 tapping screw *

2

Rack mounting bracket *

2

Fiber washer (for M5) *

2

Coupler *

2

5 x 12 rack mounting screw *

2

M3 x 12 machine screw *

2

8. INSTALLING THE CONTROL UNIT

8.1. Rack Mounting

• Usetheoptionalmountinghardwaresetwheninstallingtheunitinanequipmentrack.

• Removefourrubberfeetmountedonthebottomoftheunitbeforemountinginarack.

8.1.1. When mounting a single unit

Use the optional MB-15B-BK hardware set when mounting a single unit.

8.1.2. When mounting 2 units

Use the optional MB-15B-J hardware set when mounting 2 units side by side.

Note

The control unit and other equipment cannot be linked together and mounted in a rack using the MB-15B-J.

11

8.2. Wall Mounting

Use the optional YC-850 hardware set when mounting the unit on a wall.

Step 1. InstalltheoptionalYC-850WallMountingBrackettothecontrolunit.

YC-850 Wall mounting bracket

(Option)

M3 x 6 machine screw

(supplied with the YC-850)

Control unit

[Wall mounting dimensions]

225.5 mm (8.88")

180 mm

(7.09")

3.5 x 20 wood screw

(supplied with the YC-850)

Control unit

Wall surface

Step 2. Mount the control unit on the wall.

Notes

• Useappropriatescrewswhenmountingtoawall.

• 3.5x20woodscrewsaresuppliedwiththeYC-850.

• Topreventthepowerplugfromfallingout,installtheACadapterinsuchawaythatitisnotdangling

in midair.

12

9. EQUIPMENT SETTINGS

9.1. Audio Output Selection

Step 1. Conrmthatallequipmentcablesandconnectorsarecorrectlyconnected.

Step 2. Set the output level selection switch to an appropriate position in accordance with the level of the

connectedmixer,amplieretc.

HE

C

3

1 2

CE

H

2

1 3

GND

SIGNAL

+

4dBu

-

50dBu

-

10dBV

OFF ON

OUTPUT LEVEL LOW-CUT

EH C

LNK ACT

MIC INPUTLAN OUTPUT

24V 410mA

DC INPUT

Control unit

+

4dBu

-

50dBu

-

10dBV

[Output Level Selection switch]

Note: Thegureshowsthefactory-presetsetting.

Step 3. Turn ON the control unit’s power.

9.2. Tone Settings

Note

TonesettingsareenabledwhentheOutputModeisplacedin"ArrayMode."Tonesettingscannotbeenabled

when the Output Mode is placed in "Cardioid Mode". For details regarding the "Output Mode," see p. 19,

"Microphonesettings2."

The audio output’s low frequency range can be attenuated with the low frequency cutoff switch. Since the

switchisfactory-presettoON,setittoOFFwhenthelowfrequencyoutputappearstobeinsufcient.

HE

C

3

1 2

CE

H

2

1 3

GND

SIGNAL

+

4dBu

-

50dBu

-

10dBV

OFF ON

OUTPUT LEVEL LOW-CUT

EH C

LNK ACT

MIC INPUTLAN OUTPUT

24V 410mA

DC INPUT

Control unit

[Low Frequency Cutoff switch]

OFF ON

13

10. SYSTEM SETTINGS

10.1. System Settings Summary

By installing the dedicated AM-1 iOS app on an iPad, the following function settings, real-time monitoring and

control can be performed:

FunctionsettingsandcontrolcanalsobeperformedbymayofaPCwebbrowser.

[Real-Time Monitoring]

•Checkofsoundsourcepositionandinputaudiolevel.

•Checkofaudioinputlevelofindividualmicrophoneelements.

[Function Settings]

•Trackingrangesetting:Horizontalangleanddistance

•Detectionsensitivity

•Trackingspeed

•Soundvolumecorrection:FunctionON/OFFandeffectivedistancesettings

•MuteswitchfunctionON/OFF

•Savingsettingconguration

[Control]

•Outputvolumeleveladjustment

•Presetmemoryloading

10.2. System Requirements

Followingaretheveriedoperatingsystemsandwebbrowserprograms.

PC

OS: Windows7Professional(32bit),Windows10Pro(64bit)

Webbrowser: GoogleChrome(Version56.0.2924.87),

 InternetExplorer10(Version10.0.9200.17609)

iPad

OS Version: iOS 8.1.3, iOS 9.3.5, iOS 10.1.1

14

10.3. iPad

®

Settings

10.3.1. Summary

To perform settings using an iPad, install the AM-1 iOS app on the iPad. The AM-1 app is a dedicated program

createdfortheiPadwhichcanbedownloadedfromtheAppStoreforfreeofcost.ItconnectstotheAM-1

control unit via a wireless network, allowing settings, control, and monitoring of the array microphone.

10.3.2. Installation

Using the iPad, download the AM-1 iOS app from App Store.

Note: iPhones are not compatible with the AM-1 iOS app.

Step 1. Access the App Store on the iPad.

Step 2. Searchforthe"AM-1"andtapthe"GET"button.

Downloadandinstallationwillbeginautomatically.

15

Afterinstallationiscompleted,the"TOAAM-1"iconwillappearontheiPad’shomescreen.

10.3.3. Starting preparations

PerformWi-FisetupusingtheiPad’ssettingscontrols.

ConrmthattheiPad’sIPaddressandthecontrolunit’sIPaddressaresettothesamenetwork.

Notes

• Thecontrolunit’sfactory-presetIPaddressis192.168.1.14.

• FormoreinformationonuseoftheAM-1iOSapp,pleaserefertothe"SoftwareInstructionManual"supplied

separately.

16

10.4. Settings Using Web Browser

10.4.1. Summary

Many functions of the array microphone and control unit can be set using a PC web browser.

10.4.2. Menu screen

Startthewebbrowserandenterthecontrolunit’sIPaddress*inthebrowser’saddresseldtodisplaythemenu

screen.

*

Factory-presetto192.168.1.14.

Network Setting: Network settings

Mic Settings 1: Microphone settings 1

Mic Settings 2: Microphone settings 2

SettingsLoad/Save: Loadingorsavingofsettings

17

10.4.3. Network settings

Click"NetworkSetting"onthemenuscreen.

Set the control unit’s network settings.

The following items can be edited:

IPAddress: EntertheIPaddress.

Subnet Mask: Enter the subnet mask.

DefaultGateway:Enterthedefaultgateway.

MAC Address: The MAC address cannot be changed.

ArrayMicName: Enterthearraymicrophonename(Upto16alphanumericcharactersandsymbols).

[Button Operation]

Save: Savesthesetcontentstothebuilt-inmemory"Default."

Note

Afterchangingthenetworksettings,turnOFFthecontrolunit’spower,thenturnitbackON

again.Afterthecontrolunitisrestarted,openthisscreenandconrmthatthesettingshave

been correctly changed.

Back to Menu: Reverts to the menu screen.

18

10.4.4. Microphone settings 1

Click"MicSettings1"onthemenuscreen.PerformmicrophoneparametersettingsrelatedtoTrackingControl.

[Tracking Control selection]

SelecteitherONorOFFmodewiththeradiobutton.

ON: Performs automatic tracking.

OFF: Doesnotperformautomatictracking.

[Microphone settings when Tracking Control is set to ON]

TrackingAngle: Thehorizontalanglerange(

−

90 to

+

90[deg])forcarryingoutautomatictracking.

TrackingDistance: Thedistance(0.5to3.0or∞[m])forcarryingoutautomatictracking.

Note: Figureslargerthan3.1[m]aretreatedas∞anddisplayedas"15.0[m]."

Tracking Speed: Sets the speed at which the microphone tracks the sound source. The larger the number,

thefasterthetrackingspeed(1to100).

Tracking Sensitivity: Set the threshold level for carrying out tracking. Tracking is performed when the input

audiolevelishigherthanthethresholdlevel(

−

24to0[dB]).

[Microphone settings when Tracking Control is set to OFF]

Angle: The sound source angle relative to the array

microphone(

−

90 to

+

90[deg]).

Distance: Thedistancebetweenthesoundsourceandthe

arraymicrophone(0.0to2.0[m]).

[Button operation]

Apply: Settingsarereectedonthearraymicrophone.

Settings are not saved to the built-in memory

by this button operation.

Save: Savessettingstothebuilt-inmemory"Default."

Back to Menu: Reverts to the menu screen.

Sound source

Array microphone

MUTE

Angle

0 to

-

90 [deg]

Angle

0 to

+

90 [deg]

Distance

−90° +90°

0°

[About "Angle" and "Distance"]

19

10.4.5. Microphone settings 2

Click"MicSettings2"onthemenuscreen.

Set microphone parameters other than Tracking Control.

Output Mode: Select either Array mode or Cardioid mode.

Arraymode: Detects the sound source position and causes the microphone to

function as an array microphone that performs signal processing to

maintain a constant sound volume.

Cardioid mode: The microphone functions as a unidirectional microphone in this mode.

OutputLevel: Settheaudiooutputlevel.(

−

24 to

+

24[dB])

AutoGainControl: Settheautomaticlevelcorrectionfunction.SelectingONenablesthefunction.Enterthe

effectiverangein"Distance.""Distance"istherange(distancefromthearraymicrophone)

thatenablesthefunction.(0.5to2.0[m]).

MuteButtonControl: Setwhethertoenable(ON)ordisable(OFF)themutefunctionbythearraymicrophone’s

mute switch.

[Button Operation]

Apply: Settingsarereectedonthearraymicrophone.Settingsarenotsavedtothebuilt-inmemory

by this button operation.

Save: Savessettingstothebuilt-inmemory"Default."

Back to Menu: Reverts to the menu screen.

20

10.4.6. Loading or saving the set contents

Click"SettingLoad/Save"onthemenuscreen.

Load or save settings.

Load: Reads the settings saved to the built-in memory.

 Selectthereadingsourcefrom"Default,""Preset1,"and"Preset2."

Save: Savessettingstothebuilt-inmemory.Selectthesavedestinationof"Default,""Preset1,"or"Preset2."

Note: The setting loaded or saved last is read when the control unit’s power is turned ON again.

[Button Operation]

OK: Reads settings from the place selected with the radio button or saves settings to the place

selected with the radio button.

Back to Menu: Reverts to the menu screen.

[Initial values of Default, Preset 1, and Preset 2]

•TrackingAngle:

-

90°to

+

90°

•TrackingDistance: 3.0m

•TrackingSensitivity:

-

12 dB

•TrackingSpeed: 10

•AutoGainControl: OFF

•OutputMode: Array

•MuteButtonControl: ON

•OutputLevel: 0dB

ページを読み込んでいます...

Optimus AM-1B EB ユーザーマニュアル

Optimus AM-1B EB ユーザーマニュアル

他の言語で

その他の書類