Sony DSC-TX200V ユーザーマニュアル

4-417-939-61(1)

DSC-TX200/TX200V

Digital Still Camera / Instruction Manual GB

CT

CS

GB

2

The number in parentheses indicates the number of pieces.

• Camera (1)

• Rechargeable battery pack NP-BN (1)

(This rechargeable battery pack cannot be used with Cyber-shot that are

supplied with the NP-BN1 battery pack.)

• Paint pen (1)

• Micro USB cable (1)

• AC Adaptor AC-UB10/UB10B (1)

• Power cord (mains lead) (not supplied in the USA and Canada) (1)

• Wrist strap (1)

• Cleaning Cloth (1)

• Instruction Manual (this manual) (1)

• Notes on the water-proofing (1)

English

Learning more about the camera (“Cyber-shot

User Guide”)

“Cyber-shot User Guide” is an on-line manual. Refer to it for

in-depth instructions on the many functions of the camera.

1 Access the Sony support page.

http://www.sony.net/SonyInfo/Support/

2 Select your country or region.

3 Search for the model name of your camera within the

support page.

• Check the model name on the bottom of your camera.

Checking the supplied items

GB

3

GB

Owner’s Record

The model and serial numbers are located on the bottom. Record the serial number in the

space provided below. Refer to these numbers whenever you call your Sony dealer

regarding this product.

Model No. DSC-TX200/DSC-TX200V

Serial No. _____________________________

Model No. AC-UB10/AC-UB10B

Serial No. _____________________________

To reduce fire or shock hazard, do not expose the unit to rain or

moisture.

IMPORTANT SAFETY INSTRUCTIONS

-SAVE THESE INSTRUCTIONS

DANGER

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, CAREFULLY FOLLOW THESE

INSTRUCTIONS

If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the

proper configuration for the power outlet.

[ Battery pack

If the battery pack is mishandled, the battery pack can burst, cause a fire or even chemical

burns. Observe the following cautions.

• Do not disassemble.

• Do not crush and do not expose the battery pack to any shock or force such as

hammering, dropping or stepping on it.

• Do not short circuit and do not allow metal objects to come into contact with the battery

terminals.

• Do not expose to high temperature above 60°C (140°F) such as in direct sunlight or in a

car parked in the sun.

• Do not incinerate or dispose of in fire.

• Do not handle damaged or leaking lithium ion batteries.

WARNING

CAUTION

GB

4

• Be sure to charge the battery pack using a genuine Sony battery charger or a device that

can charge the battery pack.

• Keep the battery pack out of the reach of small children.

• Keep the battery pack dry.

• Replace only with the same or equivalent type recommended by Sony.

• Dispose of used battery packs promptly as described in the instructions.

[ AC Adaptor

Connect the AC Adaptor to the nearest wall outlet (wall socket).

If some trouble occurs while using the AC Adaptor, immediately shut off the power by

disconnecting the plug from the wall outlet (wall socket).

The power cord (mains lead), if supplied, is designed specifically for use with this camera

only, and should not be used with other electrical equipment.

[ RECYCLING LITHIUM-ION BATTERIES

Lithium-Ion batteries are recyclable.

You can help preserve our environment by returning your used

rechargeable batteries to the collection and recycling location nearest

you.

For more information regarding recycling of rechargeable batteries,

call toll free

1-800-822-8837, or visit http://www.rbrc.org/

Caution: Do not handle damaged or leaking Lithium-Ion batteries.

[ Battery pack

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

This Class B digital apparatus complies with Canadian ICES-003.

For Customers in the U.S.A. and Canada

GB

5

GB

UL is an internationally recognized safety organization.

The UL Mark on the product means it has been UL Listed.

If you have any questions about this product, you may call:

Sony Customer Information Center

1-800-222-SONY (7669).

The number below is for the FCC related matters only.

[ Regulatory Information

[ CAUTION

You are cautioned that any changes or modifications not expressly approved in this manual

could void your authority to operate this equipment.

[ Note:

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

The supplied interface cable must be used with the equipment in order to comply with the

limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.

For Customers in the U.S.A.

Declaration of Conformity

Trade Name: SONY

Model No.: DSC-TX200V

Responsible Party: Sony Electronics Inc.

Address: 16530 Via Esprillo,

San Diego, CA 92127 U.S.A.

Telephone No.: 858-942-2230

This device complies with Part15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may cause

undesired operation.

GB

6

About water-proof and dust-proof performance of

the camera

This camera is equipped to be water-proof and dust-proof. Damage caused

from misuse, abuse or failure to properly maintain the camera is not covered

by the limited warranty.

• This camera is water-proof/dust-proof equivalent to IEC60529 IP58. The

camera is operable up to a water depth of 5 m for 60 minutes.

• Do not subject the camera to pressurized water, such as from a tap.

• Do not use in hot springs.

• Use the camera in the recommended operating water temperature range of

–10°C to +40°C (14°F to 104°F).

• As for dust-proof performance, there is no guarantee that the camera will not

become scratched or dented.

• Sometimes water-proof performance is lost if the camera is subjected to a

strong shock such as from being dropped. We recommend the camera be

inspected at an authorized repair shop for a fee.

• Accessories supplied do not meet water-proof and dust-proof specifications.

Notes before using the camera under/near water

• Make sure that no foreign matter such as sand, hair, or dirt gets inside the

battery/memory card cover. Even a small amount of foreign matter may lead

to water entering the camera.

• Confirm that the sealing gasket and its

mating surfaces have not become

scratched. Even a small scratch may

lead to water entering the camera. If the

sealing gasket or its mating surfaces

become scratched, take the camera to an

authorized repair shop to have the

sealing gasket replaced for a fee.

• If dirt or sand gets on the sealing gasket

or its mating surfaces, wipe the area

clean with a soft cloth that will not leave

behind any fibers. Prevent the sealing

gasket from becoming scratched by touching it while charging a battery or

using a cable.

• Do not open/close the battery/memory card cover with wet or sandy hands or

near water. There is a risk this will lead to sand or water getting inside.

Before opening the cover, perform the procedure described in “Cleaning

after using the camera under/near water”.

1 Sealing gasket

2 Surface contacting

the sealing gasket

GB

7

GB

• Open the battery/memory card cover with the camera completely dry.

• Always confirm that the battery/memory card cover has been securely

locked.

Notes on using the camera under/near water

• The touch panel may be activated by water splashes on the screen icons.

When using the camera under/near water, it is recommended that you hide

the icons by touching on the right side of the screen. Touch for a few

seconds to display the icons again.

• The touch panel cannot be operated underwater. Use the buttons of the

camera to perform shooting operations.

• Do not subject the camera to shock such as from jumping into water.

• Do not open and close the battery/memory card cover while under/near

water.

• This camera sinks in water. Place your hand through the wrist strap to

prevent the camera from sinking.

• Faint, white, circular spots may appear in under-water flash photos due to

reflections off of floating objects. This is not a malfunction.

• Select (Underwater) in Scene Selection to shoot underwater with less

distortion.

Cleaning after using the camera under/near water

• Always clean the camera with water after use

within 60 minutes, and do not open the

battery/memory card cover before cleaning is

finished. Sand or water may get inside places

where it cannot be seen. If not rinsed, water-

proof performance will be degraded.

• Allow the camera to sit in pure water poured

into a cleaning bowl for about 5 minutes.

Then, gently shake the camera, press each button, slide the zoom lever inside

the water, to clean away any salt, sand or other matter lodged around the

buttons.

• After rinsing, wipe away water drops with a soft cloth. Allow the camera to

dry completely in a shady location with good ventilation. Do not blow dry

with a hair dryer as there is a risk of deformation and/or degraded water-

proof performance.

• Wipe away water drops or dust on the memory card/battery cover or terminal

cover with a soft dry cloth.

GB

8

• This camera is constructed to drain water. Water will drain from openings

around the ON/OFF (Power) button, zoom lever, and other controls. After

removing from water, place the camera on a dry cloth for a while to allow

water to drain.

• Bubbles may appear when the camera is placed under water. This is not a

malfunction.

• The camera body may become discolored if it comes in contact with

sunscreen or suntan oil. If the camera does come in contact with sunscreen or

suntan oil, quickly wipe it clean.

• Do not allow the camera to sit with salt water inside or on the surface. This

may lead to corrosion or discoloration, and degradation of water-proof

performance.

• To maintain the water-proof performance, we recommend that once a year

you take the camera to your dealer, or to an authorized repair shop, to have

the sealing gasket of the battery/memory card cover replaced for a fee.

GB

9

GB

A Shutter button

B W/T (Zoom) lever

C Self-timer lamp/Smile Shutter

lamp/AF illuminator

D Flash

E ON/OFF (Power) button

F Power/Charge lamp

G GPS sensor (built-in,

DSC-TX200V only)

H Lens

I OLED/Touch panel

J Microphone

K Speaker

L Hook for wrist strap

M HDMI Micro jack

N Access lamp

O Memory card slot

P Micro USB connector

Q Battery/memory card cover

R Battery insertion slot

S Battery eject lever

T Tripod receptacle

• Use a tripod with a screw less

than 5.5 mm (7/32 inches) long.

Otherwise, you cannot firmly

secure the camera, and damage to

the camera may occur.

Identifying parts

GB

10

Inserting the battery pack

1

Open the cover.

2

Insert the battery pack.

• Align the battery pack with the guide inside the battery insertion slot.

Insert the battery pack until the battery eject lever locks into place.

• Securely close the battery cover until you hear the slide lock on the

cover catch in place and so that the yellow mark under the slide lock can

no longer be seen.

• Closing the cover with the battery inserted incorrectly may damage the

camera.

Battery eject lever

GB

11

GB

Charging the battery pack

1

Connect the camera to the AC Adaptor (supplied),

using the micro USB cable (supplied).

2

Connect the AC Adaptor to the wall outlet (wall socket).

The Power/Charge lamp lights orange, and charging starts.

• Turn off the camera while charging the battery.

• You can charge the battery pack even when it is partially charged.

• When the Power/Charge lamp flashes and charging is not finished,

remove and re-insert the battery pack.

Power cord

(Mains lead)

For customers in the USA, Canada

For customers in countries/regions

other than the USA and Canada

Power/Charge lamp

Lit: Charging

Off: Charging finished

Flashing:

Charging error

Charging paused due to

overheating

GB

12

• If the Power/Charge lamp on the camera flashes when the AC Adaptor is

connected to the wall outlet (wall socket), this indicates that charging is

temporarily stopped because the temperature is outside the recommended range.

When the temperature gets back within the appropriate range, the charging

resumes. We recommend charging the battery pack in an ambient temperature of

between 10°C to 30°C (50ºF to 86ºF).

• The battery pack may not be effectively charged if the terminal section of the

battery is dirty. In this case, wipe any dust off lightly using a soft cloth or a cotton

swab to clean the terminal section of the battery.

• Connect the AC Adaptor (supplied) to the nearest wall outlet (wall socket). If

malfunctions occur while using the AC Adaptor, disconnect the plug from the wall

outlet (wall socket) immediately to disconnect from the power source.

• When charging is finished, disconnect the AC Adaptor from the wall outlet (wall

socket).

• Be sure to use only genuine Sony brand battery packs, micro USB cable (supplied)

and AC Adaptor (supplied).

• BC-TRN2 battery charger (sold separately) is able to quick-charge the NP-BN

rechargeable battery pack supplied with this model. BC-TRN battery charger (sold

separately) is not able to quick-charge the NP-BN rechargeable battery pack

supplied with this model.

x

Charging time (Full charge)

The charging time is approximately 115 min. using the AC Adaptor

(supplied).

• The above charging time applies when charging a fully depleted battery pack at a

temperature of 25°C (77°F). Charging may take longer depending on conditions of

use and circumstances.

Notes

Note

GB

13

GB

x

Charging by connecting to a computer

The battery pack can be charged by connecting the camera to a computer using

a micro USB cable.

• Note the following points when charging via a computer:

– If the camera is connected to a laptop computer that is not connected to a power

source, the laptop battery level decreases. Do not charge for an extended period

of time.

– Do not turn on/off or restart the computer, or wake the computer to resume from

sleep mode when a USB connection has been established between the computer

and the camera. The camera may cause a malfunction. Before turning on/off, or

restarting the computer or waking the computer from sleep mode, disconnect the

camera and the computer.

– No guarantees are made for charging using a custom-built computer or a

modified computer.

Note

GB

14

x

Battery life and number of images that can be

recorded and played back

• The above number of images applies when the battery pack is fully charged. The

number of images may decrease depending on the conditions of use.

• The number of images that can be recorded is for shooting under the following

conditions:

– Using Sony microSD memory card (Class 4 or faster) (sold separately)

– The battery pack is used at an ambient temperature of 25°C (77°F).

– [GPS setting] is set to [Off] (DSC-TX200V only).

– [Disp. Resolution] is set to [Standard].

• The number for “Shooting (still images)” is based on the CIPA standard, and is for

shooting under the following conditions:

(CIPA: Camera & Imaging Products Association)

– [Panel Brightness] is set to [3(Normal)].

– Shooting once every 30 seconds.

– The zoom is switched alternately between the W and T ends.

– The flash strobes once every two times.

– The power turns on and off once every ten times.

• The battery life for movies applies shooting under the following conditions:

– Movie quality: AVC HD HQ

– When continuous shooting ends because of set limits (page 27), press the shutter

button down again and continue shooting. Shooting functions such as the zoom

do not operate.

Battery life Number of images

Shooting (still images) Approx. 110 min. Approx. 220 images

Viewing (still images) Approx. 160 min. Approx. 3200 images

Shooting (movies) Approx. 55 min. —

Notes

GB

15

GB

x

Supplying power

The camera can be supplied with power from the wall outlet (wall socket) by

connecting to the AC Adaptor, using the micro USB cable (supplied).

You can import images to a computer without worrying about draining the

battery pack by connecting the camera to a computer using the micro USB

cable.

In addition, you can use the AC Adaptor AC-UD10 (sold separately) for

shooting to supply power when shooting.

• Power cannot be supplied when the battery pack is not inserted in the camera.

• When the camera is connected directly to a computer or to a power outlet using the

supplied AC Adaptor AC-UB10/UB10B, power supply is available only in

playback mode. If the camera is in shooting mode or while you are changing the

settings of the camera, power is not supplied even if you make a USB connection

using the micro USB cable.

• If you connect the camera and a computer using the micro USB cable while the

camera is in playback mode, the display on the camera will change from the

playback screen to the USB connection screen. Touch (Playback) button to

switch to the playback screen.

Notes

GB

16

Inserting a memory card (sold separately)

1

Open the cover.

2

Insert the memory card (sold separately).

• With the camera lens facing upward, as illustrated, insert the memory

card straight in until it clicks into place.

• Pushing down on the microSD memory card (in the direction of the

battery insertion slot) while inserting it may damage the camera.

• Be careful when removing the microSD memory card, as it may pop out

quickly.

3

Close the cover.

4

Check the icon displayed on the upper right screen and

make sure the memory card is inserted correctly.

• A: The memory card is inserted

correctly.

• B: The memory card is not inserted

correctly. Confirm the direction of the

memory card and reinsert it straight into

the camera.

• Only one memory card can be inserted.

“Memory Stick

Micro” media (M2)

microSD memory

card

Make sure that the correct

side is facing up.

Terminal

Printing

surface

GB

17

GB

x

Memory cards that can be used

• In this manual, products in A are collectively referred to as “Memory Stick Micro”

media, and products in B are collectively referred to as microSD memory card.

x

To remove the memory card/battery pack

Memory card: Push the memory card in once to eject the memory card.

Battery pack: Slide the battery eject lever. Be sure not to drop the battery pack.

• Never remove the memory card/battery pack when the access lamp (page 9) is lit.

This may cause damage to data in the memory card/internal memory.

Memory card For still images For movies

A

Memory Stick Micro a —

Memory Stick Micro (Mark2) aa

B

microSD memory card aa (Class 4 or faster)

microSDHC memory card aa (Class 4 or faster)

Note

GB

18

Setting the clock

1

Press the ON/OFF (Power) button.

The camera is turned on. The power lamp lights up green only when the

camera starts up.

Date & Time setting is displayed when you turn on the camera for the first

time.

• It may take time for the power to turn on and allow operation.

2

Select a desired language.

3

Select a desired geographic location by following the

on-screen instructions, then touch [Next].

4

Set [Daylight Savings] or [Summer Time], [Date & Time

Format] and [Date & Time], then touch [Next].

• Midnight is indicated as 12:00 AM, and noon as 12:00 PM.

5

Touch [OK].

6

Follow the instructions on the screen.

• If you set [GPS setting] to [On], the battery charge may be depleted

faster.

• If you set [Disp. Resolution] to [High], the battery charge may be

depleted faster.

ON/OFF (Power) button

GB

19

GB

Shooting still images

Shooting movies

• The sound of the lever operating will be recorded when the zoom function

operates while shooting a movie.

• Continuous shooting is possible for approximately 29 minutes at one time at the

camera’s default settings and when the temperature is approximately 25°C (77°F).

When movie recording is finished, you can restart recording by performing the

steps above from the beginning. Recording may stop to protect the camera

depending on the ambient temperature.

Shooting still images/movies

1

Press the shutter button halfway down to focus.

When the image is in focus, a beep sounds and the z indicator lights.

2

Press the shutter button fully down to shoot an image.

1

Touch (REC Mode) t (Movie Mode).

2

Press the shutter button to start recording.

• Do not cover the microphone with your fingers.

• Use the W/T (zoom) lever to change the zoom scale.

• When (REC Mode) is not set to (Movie Mode), you can start

or stop recording by touching (Movie button) on the screen.

3

Press the shutter button again to stop recording.

Notes

Shutter button

GB

20

x

Selecting next/previous image

Touch (Next)/ (Previous) on the screen.

• To play back movies, touch (Playback) in the center of the screen.

• To zoom in, slide the W/T (Zoom) lever to T side.

x

Deleting an image

Touch (Delete) t [This Image].

x

Returning to shooting images

Touch on the screen.

• You can also return to shooting mode by pressing the shutter button halfway

down.

Viewing images

1

Touch (Playback).

• When images on a memory card recorded with other cameras are played

back on this camera, the registration screen for the data file appears.

ページが読み込まれています...

Sony DSC-TX200V ユーザーマニュアル

Sony DSC-TX200V ユーザーマニュアル

他の言語で

関連論文