DW293
2
Copyright DeWALT
English (original instructions) 2
简体中文 7
1
B
A
4
2
3
1
2
english
IMPACT WRENCH
DW293
Safety Instructions
WARNING: To reduce the risk of injury,
read the instruction manual.
General Power Tool Safety Warnings
WARNING: Read all safety warnings
and all instructions. Failure to follow
the warnings and instructions may
result in electric shock, re and/or
serious injury.
Save all warnings and instructions for future
reference
The term "power tool" in the warnings refers to
your mains operated (corded) power tool or battery
operated (cordless) power tool.
1 Work Area Safety
a Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
b Do not operate power tools in explosive
atmospheres, such as in the presence of
ammable liquids, gases or dust. Power
tools create sparks which may ignite the dust or
fumes.
c Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
2 Electrical Safety
a Power tool plugs must match the outlet.
Never modify the plug in any way. Do not use
any adapter plugs with earthed (grounded)
power tools. Unmodied plugs and matching
outlets will reduce risk of electric shock.
b Avoid body contact with earthed or
grounded surfaces such as pipes, radiators,
ranges and refrigerators. There is an
increased risk of electric shock if your body is
earthed or grounded.
Congratulations!
You have chosen a DeWALT tool. Years of
experience, thorough product development and
innovation make D
eWALT one of the most reliable
partners for professional power tool users.
Technical data
DW293
Voltage V 220-240
Power input W 710
No-load speed min
-1
2,100
Impact rate min
-1
2,700
Socket size 1/2"
Weight kg 3.2
Denitions: Safety guidelines
The denitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not
avoided, will result in death or serious
injury.
WARNING: Indicates a potentially
hazardous situation which, if not
avoided, could result in death or serious
injury.
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of re.
3
english
c Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil,
sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric
shock.
e When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces
the risk of electric shock.
f If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD
reduces the risk of electric shock.
3 Personal Safety
a Stay alert, watch what you are doing and
use common sense when operating a power
tool. Do not use a power tool while you are
tired or under the inuence of drugs, alcohol
or medication. A moment of inattention while
operating power tools may result in serious
personal injury.
b Use personal protective equipment. Always
wear eye protection. Protective equipment
such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
c Prevent unintentional starting. Ensure the
switch is in the off position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools
with your nger on the switch or energising
power tools that have the switch on invites
accidents.
d Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key
left attached to a rotating part of the power tool
may result in personal injury.
e Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
f Dress properly. Do not wear loose clothing
or jewellery. Keep your hair, clothing and
gloves away from moving parts. Loose
clothes, jewellery or long hair can be caught in
moving parts.
g If devices are provided for the connection of
dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce
dust-related hazards.
4 Power Tool Use and Care
a Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
b Do not use the power tool if the switch does
not turn it on and off. Any power tool that
cannot be controlled with the switch is
dangerous and must be repaired.
c Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
d Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool. Power tools are
dangerous in the hands of untrained users.
e Maintain power tools. Check for
misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tools operation.
If damaged, have the power tool repaired
before use. Many accidents are caused by
poorly maintained power tools.
f Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g Use the power tool, accessories and tool bits
etc., in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the
power tool for operations different from those
intended could result in a hazardous situation.
4
english
5 Service
a Have your power tool serviced by a qualied
repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
ADDITIONAL SPECIFIC SAFETY RULES
Safety Instructions for All
Impact Wrench
• Holdpowertoolbyinsulatedgripping
surfaces,whenperforminganoperation
wherethefastenermaycontacthiddenwiring
oritsowncord.Fasteners contacting a "live"
wire may make exposed metal parts of the power
tool "live" and could give the operator an electric
shock.
• Fanstenerscontactinga"live"wiremaymake
exposedmetalpartsofthepowertool"live"
andcouldgivetheoperatoranelectricshock.
Contact with a “live" wire will make exposed
metal parts of the tool “live" and shock the
operator.
• Useclampsorotherpracticalwaytosecure
andsupporttheworkpiecetoastable
platform. Holding the work by hand or against
your body is unstable and may lead to loss of
control.
• Wearsafetygogglesorothereyeprotection.
Hammeringanddrillingoperationscause
chips to fly. Flying particles can cause permanent
eye damage.
• Bits,socketsandtoolsgethotduring
operation. Wear gloves when touching them.
• Donotoperatethistoolforlongperiodsof
time. Vibration caused by tool action may be
harmful to your hands and arms. Use gloves
to provide extra cushion and limit exposure by
taking frequent rest periods.
Residual Risks
In spite of the application of the relevant safety
regulations and the implementation of safety devices,
certain residual risks cannot be avoided. These are:
– Impairment of hearing.
– Risk of personal injury due flying particles.
– Risk of burns due to accessories becoming hot
during operation.
– Risk of personal injury due to prolonged use.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
DATE CODE POSITION (FIG. A)
The Date Code (7), which also includes the year of
manufacture, is printed into the housing.
Example:
2010 XX XX
Year of Manufacture
Package Contents
The package contains:
1 Impact wrench
1 Instruction manual
● Check for damage to the tool, parts or
accessories which may have occurred during
transport.
● Take the time to thoroughly read and
understand this manual prior to operation.
Description (g. A)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
1 On/off switch
2 Forward/reverse slider
3 Anvil
4 Main handle
DO NOT use this tool under wet conditions or in
presence of ammable liquids or gases.
This impact wrench is a professional power tool.
DO NOT let children come into contact with the
tool. Supervision is required when inexperienced
operators use this tool.
Electrical Safety
The electric motor has been designed for one
voltage only. Always check that the power supply
corresponds to the voltage on the rating plate.
5
english
Your DeWALT tool is double insulated in
accordance with EN 60745; therefore no
earth wire is required.
If the supply cord is damaged, it must be replaced
by a specially prepared cord available through the
DeWALT service organisation.
Using an Extension Cable
If an extension cable is required, use an approved
extension cable suitable for the power input of this
tool (see technical data). The minimum conductor size
is 1 mm
2
; the maximum length is 30 m.
When using a cable reel, always unwind the cable
completely.
WARNING: Always wait until the motor
has come to a complete standstill
before changing the direction of
rotation.
OPERATION
Instructions for Use
WARNING:
Always observe the safety instructions
and applicable regulations.
WARNING: To reduce the risk of
serious personal injury, turn tool off
and disconnect tool from power
source before making any
adjustments or removing/installing
attachments or accessories.
Screwdriving or Nutsetting (g. A)
● Select the appropriate socket for the screw or
nut to be driven.
● Select forward or reverse rotation as described
above.
● Hold the tool in line with the fastener.
Proper Hand Position (fig. A, B)
WARNING: To reduce the risk of
serious personal injury, ALWAYS use
proper hand position as shown.
WARNING: To reduce the risk of
serious personal injury, ALWAYS hold
securely in anticipation of a sudden
reaction.
Proper hand position requires one hand on the main
handle (4), as shown.
Switching On and Off (g. A)
● To run the tool, press the on/off switch (1).
● To stop the tool, release the switch.
MAINTENANCE
Your DeWALT power tool has been designed to
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
WARNING: To reduce the risk of
injury, switch off and disconnect the
tool from the power source before
installing and removing accessories,
before adjusting or changing set-ups
or when making repairs. Be sure the
tool is switched off. An accidental
start-up can cause injury.
Lubrication
Your power tool requires no additional lubrication.
Cleaning
WARNING: Blow dirt and dust out of
the main housing with dry air as often
as dirt is seen collecting in and around
the air vents. Wear approved eye
protection and approved dust mask
when performing this procedure.
WARNING: Never use solvents or other
harsh chemicals for cleaning the
non-metallic parts of the tool. These
chemicals may weaken the materials
used in these parts. Use a cloth
dampened only with water and mild
soap. Never let any liquid get inside the
tool; never immerse any part of the tool
into a liquid.
6
english
Optional Accessories
Consult your dealer for further information on the
appropriate accessories.
WARNING: Since accessories, other
than those offered by D
eWALT, have
not been tested with this product, use of
such accessories with this tool could be
hazardous. To reduce the risk of injury,
only D
eWALT, recommended
accessories should be used.
Various types of sockets, holders and adaptors are
available as an option.
Protecting the Environment
Separate collection. This product must
not be disposed of with normal
household waste.
Should you nd one day that your D
eWALT product
needs replacement, or if it is of no further use to
you, do not dispose of it with household waste.
Make this product available for separate collection.
Separate collection of used products
and packaging allows materials to be
recycled and used again. Re-use of
recycled materials helps prevent
environmental pollution and reduces
the demand for raw materials.
Local regulations may provide for separate
collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
D
eWALT provides a facility for the collection and
recycling of D
eWALT products once they have
reached the end of their working life. To take
advantage of this service please return your
product to any authorised repair agent who will
collect them on our behalf.
You can check the location of your nearest
authorised repair agent by contacting your local
D
eWALT ofce at the address indicated in this
manual. Alternatively, a list of authorised D
eWALT
repair agents and full details of our after-sales
service and contacts are available on the Internet
at: www.2helpU.com
7
DW293
a)
1)
2)
3)
b)
1)
2)
3)
4)
D EWALT
D
EWALT
DW293
220
710
/ 2,100
/ 2,700
13mm
3.2
8
5)
6)
RCD
RCD
c)
1)
2)
3) /
4)
5)
6)
7)
d)
1)
2)
3)
4)
5)
6)
7)
e)
a)
•
•
9
•
•
•
•
–
–
–
–
A
(7)
2010 XX XX
1
1
●
●
A
1 On/off
2 /
3
4
DEWALT IEC 60745
DEWALT
1mm
2
30 m
10
/
A
●
●
●
AB
(4)
A
● (1)
●
DEWALT
D EWALT
D
EWALT
11
D EWALT
D
E WALT
D
EWALT
D
EWALT
D
EWALT
www.2helpU.com
Black & Decker Str.40 65510 Idstein,
N339179 09/2013
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
