2
En 3
Thank you for purchasing this Yamaha product.
This product is a bar-shaped speaker system that can be used by
connecting it to a TV. Audio content from a Bluetooth® device can also be
played through this product.
• Be sure to read this document and the included Safety Guide to ensure
proper and safe use. Keep these documents readily available for future
reference.
Safety Guide
Be sure to read the Safety Guide first to ensure safe use.
Quick Guide (this document)
This document describes the procedure for enjoying the sound of a
TV.
1 Confirming contents of product package (p. 4)
2 Preparing the remote control (p. 5)
3 Installing the product (p. 5)
4 Connecting to a TV (p. 6)
5 Connecting to power (p. 7)
6 Playing TV sound through the sound bar (p. 7)
Adjusting the sound to your preference (p. 9)
Listening to audio from a Bluetooth® device (p. 10)
Controlling the sound bar with the smartphone app (p. 10)
User Guide
More detailed information is described.
https://manual.yamaha.com/av/23/srb30a/
4En
1Confirming contents of product package
This product includes the following main devices and accessories. Take out all items from the box and make sure that all items are present.
Sound bar (SR-B30A)
Remote control Power cord
Mounting template
Spacers (×2)
• Quick Guide (this document)
•Safety Guide
HDMI cable
Use when mounting the sound bar on a wall.
Main device
Accessories
En 5
2Preparing the remote
control
A Lithium battery (CR2025) has already been inserted into the remote
control. Pull out the insulation sheet as follows so as to use the
remote control.
Operating range of the remote control
The remote control can be used to control the functions of this
product. When using the remote control, point the remote control at
the remote control sensor of the sound bar within the range shown in
the following illustration:
3Installing the product
Install the sound bar as shown in the following illustration.
Battery insulating strip
Within 6 m (20 ft)
Remote control sensor
Remote control
For proper installation of the sound
bar on a wall, make sure to have the
work done by a contractor with
qualified service personnel. See the
Wall Mounting Installation Guide on
our website for the installation
method.
Wall Mounting
Installation Guide
6En
4Connecting to a TV
Connect to a TV using the HDMI cable (included)
Connect to an HDMI input jack compatible with Audio Return Channel (labeled as “eARC” or “ARC”) on the TV using the included HDMI cable.
NOTE
• Be sure to use the included HDMI cable.
• When connecting to a TV not compatible with ARC or connecting to an audio device, follow the connection procedure described in the User
Guide.
HDMI IN
eARC/ARC
HDMI
HDMI
Sound bar (rear)
HDMI OUT/TV (eARC/ARC) jack
TV
HDMI input jack
(compatible with eARC/ARC)
Control signal
TV’s audio signal
En 7
5Connecting to power
After connecting the sound bar to the TV, connect the sound bar to
power as follows:
6Playing TV sound through
the sound bar
1Turn on the TV.
When the the HDMI Control function of the TV is enabled (p. 8),
the sound bar will also turn on. In this case, go to Step 4.
2Turn on the sound bar.
Press the power button on the remote control.
3Press TV.
4Press VOLUME (+/−) to adjust the volume.
Sound bar (rear)
To an AC wall outlet
Power cord (included)
TV
VOLUME (+/−)
Power
Remote control
8En
HDMI Control function
NOTE
• When the sound bar is connected to a TV via HDMI cable, confirm that the TV’s settings are properly configured as follows:
- The TV’s HDMI Control function is enabled.
- The audio output is not set to the TV speakers.
• Connect AV devices, such as BD/DVD players and set top boxes, to the TV’s HDMI input jacks.
When the sound bar is connected to the HDMI input jack
compatible with Audio Return Channel (labeled as “eARC” or
“ARC”) on a TV via an HDMI cable, control signals are
transmitted from the TV to the sound bar.
This will enable you to use the HDMI Control function to control
the sound bar using the TV’s remote control. Also, the TV audio
signal is transmitted to the sound bar via the HDMI cable.
Therefore, the sound bar can be connected to a TV using a
single HDMI cable.
En 9
a
Listening to audio with sound that matches the video or
music content (Sound mode)
A sound mode can be selected from among three sound modes that
produce surround-sound fields and one sound mode for stereo
playback. This function is STANDARD by default.
STEREO
This sound mode provides stereo playback. This sound mode
is best suited for music playback.
STANDARD
This sound mode provides surround playback that is best
suited for TV programs such as sports broadcasts. It
emphasizes human voices and makes them easier to hear,
while creating a sense of presence.
MOVIE
This sound mode provides surround playback that is best
suited for movies. It creates a sound space that seems to
envelop your body.
GAME
This sound mode provides surround playback that is best
suited for video games. Accurate localization of individual
sound effects provides a highly immersive gaming experience.
bPlaying back human voices clearly (CLEAR VOICE)
The human voices within the audio can be heard more easily when
the Clear Voice function is enabled. The function is recommended
for playback at a low volume and for movies or dramas that use a lot
of background music and sound effects.
Press CLEAR VOICE to enable or disable this function.
cEnjoying rich bass sound (BASS EXT)
The bass sound is enhanced and becomes richer when the Bass
Extension function is enabled.
Press BASS EXT to enable or disable this function.
Adjusting the sound to your preference
a
b
c
Remote control
Glows: enabled
Off: disabled
Flash three times: enabled
Flash one time: disabled
10 En
Audio content from a Bluetooth device (such as a smartphone) can
be played through the sound bar.
1Press BLUETOOTH on the remote control to switch
the input source to Bluetooth.
2On the Bluetooth device, enable the Bluetooth
function.
A list of Bluetooth devices that can be connected is displayed on
the screen of the Bluetooth device.
3Select “Yamaha SR-B30A” or “SR-B30A” within the
list.
4Play a song on the Bluetooth device when the
connection is established.
The sound bar will begin playing audio from the Bluetooth
device.
NOTE
This product can be connected to two Bluetooth devices
simultaneously (multipoint connection). To switch between two
Bluetooth devices to be played, stop playback on the currently playing
device and then start playback on the other.
By installing the free dedicated app “
” on a smartphone, the sound bar can also be
controlled from that smartphone. The app allows you to
control the sound bar while checking the sound bar
settings currently applied, such as sound mode and
volume adjustment of each frequency range (tone
control), via the app’s screen.
Search for “ ” on the App Store or
Google Play and install it on the smartphone.
For details on the app, see the description of the app on
the App Store or Google Play.
NOTE
• To control the sound bar using the app, configure the settings on
your smartphone as follows:
- Enable the Bluetooth function.
- For devices using the Android 11 OS or earlier, configure the
settings to allow location information to be obtained.
The Sound Bar Remote app uses location information from the
Android device only to detect the sound bar. The acquired location
information will not be used for any other purpose.
- For devices using the Android 12 OS or later, configure the
settings to allow the use of nearby devices.
• This sound bar is only compatible with the Sound Bar Remote app.
The sound bar cannot be controlled using other apps (such as
Sound Bar Controller).
Listening to audio from a
Bluetooth® device
Bluetooth device
Controlling the sound bar with
the smartphone app
Zh-tw 11
感謝您購買本 Ya m a h a 產品。
本產品為條形揚聲器系統，可透過將其連接到電視來使用。來
自 Bluetooth® 裝置的音訊內容亦可透過本產品播放。
請務必閱讀本文件和隨附的 「安全指南」以確保正確且安全
的使用。請妥善保管這些文件以備日後參考。
安全指南
請務必先閱讀 安全指南 以確保安全的使用。
快速指南 （本文件）
本文件說明享受電視聲音的程序。
1 確認產品包裝的內容 (p. 12)
2 準備遙控器 (p. 13)
3 安裝本產品 (p. 13)
4 連接到電視 (p. 14)
5 連接到電源 (p. 15)
6 透過條形音箱播放電視聲音 (p. 15)
根據您的喜好調整聲音 (p. 17)
收聽來自 Bluetooth® 裝置的音訊 (p. 18)
使用智慧型手機應用程式控制條形音箱 (p. 18)
使用指南
說明更詳細的資訊。
https://manual.yamaha.com/av/23/srb30a/
12 Zh-tw
1確認產品包裝的內容
本產品包含以下主要裝置和配件。從盒子中取出所有物品並確保所有物品都存在。
條形音箱 （SR-B30A）
遙控器 電源線
安裝模板
墊片 （×2）
•快速指南 （本文件）
•安全指南
HDMI 纜線
將條形音箱安裝在牆上時使用。
主要裝置
配件
Zh-tw 13
2準備遙控器
遙控器裡已裝有⼀個鋰電池 （CR2025）。如下拉出絕緣片以
使用遙控器。
遙控器操作範圍
遙控器可用於控制本產品的功能。使用遙控器時，請在下圖所
示的範圍內將遙控器對準條形音箱的遙控器傳感器，：
3安裝本產品
如下圖所示安裝條形音箱。
電池絕緣條
6 m 以內
遙控器傳感器
遙控器
為了在牆上正確安裝條形音箱，
請確保由具有合格服務人員的承
包商執行作業。有關安裝方法，
請參閱本公司網站上的 壁掛式安
裝指南 。
壁掛式安裝指南
14 Zh-tw
4連接到電視
使用 HDMI 纜線 （隨附）連接到電視
使用隨附的 HDMI 纜線連接到電視上與 Audio Return Channel （標記為 「eARC」或 「ARC」）相容的 HDMI 輸入插孔。
註
•務必使用隨附的 HDMI 纜線。
•當連接到與 ARC 不相容的電視或連接到音訊裝置時，請按照 使用指南中描述的連接程序進行操作。
HDMI IN
eARC/ARC
HDMI
HDMI
條形音箱 （背面）
HDMI OUT/TV (eARC/ARC) 插孔
電視
HDMI 輸入插孔
（與 eARC/ARC 相容）
控制訊號
電視的音訊訊號
16 Zh-tw
HDMI 控制功能
註
•當條形音箱透過 HDMI 纜線連接到電視時，請確認電視的設定正確配置如下：
-電視的 HDMI 控制功能已啟用。
-音訊輸出未設定為電視揚聲器。
•將 AV 裝置 （例如 BD/DVD 播放器和機頂盒）連接到電視的 HDMI 輸入插孔。
當條形音箱透過 HDMI 纜線連接到電視上與 Audio Return
Channel （標記為 「eARC」或 「ARC」）相容的 HDMI
輸入插孔時，控制訊號會從電視傳輸到條形音箱。
這將使您能夠使用 HDMI 控制功能，用電視遙控器來控制
條形音箱。此外，電視音訊訊號經由 HDMI 纜線傳輸到條
形音箱。因此，可以使用單條 HDMI 纜線將條形音箱連接
到電視。
Zh-tw 17
a
聆聽聲音與視訊或音樂內容相配的音訊（聲音模式）
可以從產⽣環繞音場的三種聲音模式和⼀種用於立體聲播放的
聲音模式中選擇⼀種聲音模式。此功能的原廠設定為
STANDARD
。
STEREO
此聲音模式提供立體聲播放。此聲音模式最適合音樂播
放。
STANDARD
此聲音模式提供最適合體育轉播等電視節目的環繞聲播
放。其強調人聲，讓人的聲音更容易聽見，同時創造臨
場感。
MOVIE
此聲音模式提供最適合電影的環繞聲播放。其創造⼀個
似乎將您的身體圍繞的聲音空間。
GAME
此聲音模式提供最適合視訊遊戲的環繞聲播放。個別音
效的準確定位提供高度身臨其境的遊戲體驗。
b清晰地播放人聲 （CLEAR VOICE）
啟用清晰語音功能時，可以更容易地聽到音訊中的人聲。對
於以低音量播放以及使用大量背景音樂和音效的電影或戲
劇，建議使用此功能。
按 CLEAR VOICE 啟用或停用此功能。
c享受豐沛的低音音效 （BASS EXT）
啟用低音延伸功能時，低音會增強並變得更豐沛。
按 BASS EXT 啟用或停用此功能。
根據您的喜好調整聲音
a
b
c
遙控器
亮起：啟用
熄滅：停用
閃爍三次：啟用
閃爍⼀次：停用
18 Zh-tw
來自 Bluetooth 裝置的音訊內容 （例如智慧型手機）可透過條
形音箱播放。
1按遙控器上的 BLUETOOTH 將輸入源切換為
Bluetooth。
2在 Bluetooth 裝置上，啟用 Bluetooth 功能。
可連接的 Bluetooth 裝置列表會顯示在 Bluetooth 裝置的
螢幕上。
3在列表中選擇 「Yamaha SR-B30A」或 「SR-B30A」。
4建立連接後在 Bluetooth 裝置上播放歌曲。
條形音箱將開始播放來自 Bluetooth 裝置的音訊。
註
本產品可以同時連接到兩台 Bluetooth 裝置 （多點連接）。若
要在兩台欲播放的 Bluetooth 裝置之間切換，請先在當前播放
中的裝置上停⽌播放，然後在另⼀台裝置上開始播放。
透過在智慧型手機上安裝免費的專用應用程式
「 」，也可從該智慧型手機控制
條形音箱。該應用程式可讓您在透過應用程式的螢
幕檢查目前套用的條形音箱設定（例如聲音模式
以及各頻率範圍的音量調整（音調控制））的同時
控制條形音箱。
在 App Store 或 Google Play 搜尋 「
」，並將其安裝在智慧型手機。
有關應用程式的詳情，請參閱 App Store 或
Google Play 上的應用程式說明。
註
•若要使用應用程式來控制條形音箱，請在您的智慧型手機上如下配
置設定：
-啟用 Bluetooth 功能。
-對於使用 Android 11 OS 或更舊版本的裝置，請配置設定以允許
取得位置資訊。
Sound Bar Remote 應用程式僅將 Android 裝置中的位置資訊用於
檢測條形音箱。取得的位置資訊不會用於任何其他目的。
-對於使用 Android 12 OS 或更新版本的裝置，請配置設定以允許使
用附近的裝置。
•此條形音箱僅與 Sound Bar Remote 應用程式相容。無法使用其他
應用程式 （例如 Sound Bar Controller）來控制條形音箱。
收聽來自
Bluetooth
®
裝置的音訊
Bluetooth 裝置
使用智慧型手機應用程式控制條
形音箱
19
VGM6570
V
10-1 Nakazawa-cho, Naka-ku, Hamamatsu, 430-8650 Japan10-1 Nakazawa-cho, Naka-ku, Hamamatsu, 430-8650 Japan
Yamaha Global Site
https://www.yamaha.com/
Yamaha Downloads
https://download.yamaha.com/
© 2023 Yamaha Corporation
Published 06/2023
KSOD-A0
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
