Philips SP9851/70 ユーザーマニュアル

SP9851, SP9811

Premium Edition

22

21

23

25 26

24

6

3

1

2

4

5

7

8

9

10

19

20

27

11

12

14

13

15

16

17

18

28

29

30

empty page before TOC

English 6

简体中文

44

English

Introduction

Congratulations on your purchase and welcome to

Philips! To fully benefit from the support that

Philips offers, register your product at

www.philips.com/welcome.

Please read this user manual, as it contains

information about the features of this shaver as

well as some tips to make shaving easier and more

enjoyable.

General description (Fig. 1)

1 Protection cap for cleansing brush attachment

2 Click-on cleansing brush attachment

3 Click-on massage attachment

4 Click-on fresh eyes attachment (SP9851 only)

5 Attachment base

6 Click-on precision trimmer attachment

7 Click-on shaving unit

8 On/off button

9 Socket for small plug

10 Product stand

11 Exclamation mark

12 Replacement reminder

13 Travel lock symbol

14 Cleaning reminder

15 Charge symbol

16 Battery charge percentage

17 Personal comfort settings bar

18 + and - buttons for personal comfort settings

19 SmartClean system (SP9851 only)

20 Cap of SmartClean system

21 On/off button

22 Replacement symbol

23 Rinsing symbol

24 Drying symbol

25 Ready symbol

26 Charge symbol

6

English

27 Cleaning cartridge for SmartClean system

28 Supply unit

29 Small plug

30 Pouch

The accessories supplied may vary for different

products. The box shows the accessories that have

been supplied with your product.

Important safety information

Read this important information carefully before

you use the appliance and its accessories and save

it for future reference. The accessories supplied

may vary for different products.

Danger

- Keep the supply unit dry.

Warning

- To charge the battery, only use the detachable

supply unit (HQ8505) provided with the

appliance.

- The supply unit contains a transformer. Do not

cut off the supply unit to replace it with another

plug, as this causes a hazardous situation.

7

English

- This appliance can be used by children aged

from 8 years and above and persons with

reduced physical, sensory or mental capabilities

or lack of experience and knowledge if they

have been given supervision or instruction

concerning use of the appliance in a safe way

and understand the hazards involved. Children

shall not play with the appliance. Cleaning and

user maintenance shall not be made by

children without supervision.

- Always unplug the shaver before you clean it

under the tap.

- Always check the appliance and its attachments

before you use it. Do not use the appliance or

its attachments if it is damaged, as this may

cause injury. Always replace a damaged part

with one of the original type.

- Do not use the click-on fresh eyes attachment if

you have glaucoma, an eye injury, or have had

eye surgery within the last 12 months.

- Do not use the click-on fresh eyes attachment if

you have an allergy to aluminum.

Caution

- Never immerse the cleaning system or the

charging stand in water and do not rinse it

under the tap.

- Never use water hotter than 60°C to rinse the

shaver.

- Only use this appliance for its intended purpose

as shown in the user manual.

- For hygienic reasons, the appliance should only

be used by one person.

- Never use compressed air, scouring pads,

abrasive cleaning agents or aggressive liquids

such as petrol or acetone to clean the

appliance.

8

English

- Do not put the appliance or any part in the

dishwasher.

- If your shaver comes with a cleaning system,

always use the original Philips cleaning fluid

(cartridge or bottle, depending on the type of

cleaning system).

- Always place the cleaning system on a stable,

level and horizontal surface to prevent leakage.

- If your cleaning system uses a cleaning

cartridge, always make sure the cartridge

compartment is closed before you use the

cleaning system to clean or charge the shaver.

- When the cleaning system is ready for use, do

not move it to prevent leakage of cleaning fluid.

- Water may drip from the socket at the bottom

of the shaver when you rinse it. This is normal

and not dangerous because all electronics are

enclosed in a sealed power unit inside the

shaver.

- Do not use the supply unit in or near wall

sockets that contain an electric air freshener to

prevent irreparable damage to the supply unit.

- Do not open the appliance to replace the

rechargeable battery.

- Do not use the appliance on chapped skin,

open wounds, healing wounds, skin recovering

from surgery or if you suffer from a skin disease

or skin irritation, such as severe acne, sunburn,

skin infection, skin cancer, inflammation,

eczema, psoriasis, nylon allergy etc.

- Do not use the appliance if you are taking

steroid-based medication.

- If you wear piercings on your face, remove the

piercings before you use the click-on

attachments or make sure that you do not use

the appliance on or near the piercing.

9

English

- Do not use the click-on massage attachment

and click-on fresh eyes attachment with self-

made cleansers, creams, oils or cosmetic

products containing harsh chemicals or rough

particles.

- If you wear jewelry, contact lenses or glasses,

remove them before you use the click-on

attachments, or make sure that you do not use

the appliance on or near jewelry or glasses.

- Only use the click-on fresh eyes attachment at

the lowest personal comfort setting.

- Do not put the click-on fresh eyes attachment

in the freezer/fridge or sun, as this may cause a

hazardous situation for your skin.

- The click-on fresh eyes attachment is intended

for use on the bony area below the eye.

- Please make sure that no loose hair gets

trapped in the click-on massage attachment

during use by wearing a headband, tying your

hair or holding it back with your hands.

- The click-on massage attachment is intended

to massage the cheeks.

- Only use the click-on massage attachment at

the medium or lowest personal comfort setting.

- Do not use the click-on massage attachment

too close to the nostrils.

Electromagnetic fields (EMF)

This Philips appliance complies with all applicable

standards and regulations regarding exposure to

electromagnetic fields.

10

English

General

- This shaver is waterproof. It is suitable for use in

the bath or shower and for cleaning under the

tap. For safety reasons, the shaver can

therefore only be used without cord.

- The supply unit is suitable for mains voltages

ranging from 100 to 240 volts.

- The supply unit transforms 100-240 volts to a

safe low voltage of less than 24 volts.

The display

Note: Before you use the shaver for the first time,

remove the protective foil from the display.

Personal comfort settings

The appliance has a feature that allows you to

personalise your settings. You can choose

between three settings depending on your

personal shaving needs (from low to high):

comfort, dynamic or efficiency. When you press the

- or + button, the segment of the personal comfort

settings bar that lights up shows the currently

selected setting. You can press the + or - button to

select a different setting.

Charging

When the shaver is charging, the battery charge

percentage and the battery symbol flash white.

The battery charge is indicated by the battery

charge percentage shown on the display.

11

English

Quick charge: When the battery symbol starts to

flash quickly, the shaver contains enough charge

for one shave.

Battery fully charged

When the battery is fully charged, the battery

charge percentage lights up white continuously.

Note: This appliance can only be used without

cord. When you press the on/off button during or

after charging, you hear a sound to indicate that

the shaver is still connected to the wall socket.

Note: When the battery is full, the display switches

off automatically after 30 minutes.

Battery low

When the battery is almost empty, the battery

charge indicator flashes orange and the shaver

beeps.

Remaining battery charge

The remaining battery charge is indicated by the

battery charge percentage shown on the display.

Cleaning reminder

Clean the shaver after every shave for optimal

performance. When you switch off the appliance,

the cleaning reminder flashes to remind you to

clean the appliance.

Travel lock

You can lock the appliance when you are going to

travel. The travel lock prevents the appliance from

being switched on by accident.

12

English

Activating the travel lock

1 Press the on/off button for 3 seconds to enter

the travel lock mode.

While you activate the travel lock, the travel lock

symbol lights up white continuously. When the

travel lock is activated, the appliance produces

a sound and the travel lock symbol flashes.

Deactivating the travel lock

1 Press the on/off button for 3 seconds.

The travel lock symbol flashes and then lights

up continuously. The appliance is now ready for

use again.

Note: You can also deactivate the travel lock by

connecting the appliance to the wall socket.

Replacement reminder

For maximum shaving performance, we advise you

to replace the shaving heads every two years.

The appliance is equipped with a replacement

reminder which reminds you to replace the

shaving heads. The shaving unit symbol lights up

white continuously, the arrows flash white and the

appliance beeps to indicate that you have to

replace the shaving heads.

Note: After replacing the shaving heads, you can

reset the replacement reminder by pressing the

on/off button for 7 seconds. If you do not reset the

replacement reminder, the shaver resets

automatically after 9 shaves.

13

English

Exclamation mark

Overheating

If the appliance overheats during charging, the

exclamation mark flashes orange. When this

happens, the shaver switches off automatically.

Charging continues once the temperature of the

appliance has decreased to the normal level.

Blocked shaving heads

If the shaving heads are blocked, the exclamation

mark lights up orange continuously. The

replacement reminder and the cleaning reminder

flash white alternately and you hear a sound. In

this case, the motor cannot run because the

shaving heads are soiled or damaged.

If the shaving heads are soiled, you have to clean

them. If the shaving heads are damaged, you have

to replace them.

Charging

Charge the shaver before you use it for the first

time and when the display indicates that the

battery is almost empty. The battery charge is

indicated by the battery charge percentage shown

on the display.

When you connect the shaver to the wall socket,

you hear a sound.

Charging takes approx. 1 hour. A fully charged

shaver has a shaving time of up to 60 minutes.

Note: You cannot use the appliance while it is

charging.

Charging with the supply unit

1 Make sure the appliance is switched off.

14

English

1

2

2 Put the small plug in the appliance and put the

supply unit in the wall socket.

3 After charging, remove the supply unit from the

wall socket and pull the small plug out of the

appliance.

Charging in the SmartClean system (SP9851 only)

1 Put the small plug in the back of the

SmartClean system.

2 Put the supply unit in the wall socket.

3 Press the top cap to be able to place the shaver

in the holder ('click').

4 Hold the shaver upside down above the holder.

Make sure the front of the shaver points

towards the SmartClean system holder.

1

2

3

5 Place the shaver in the holder, tilt the shaver

backwards and press down the top cap to

connect the shaver (‘click’).

Note: The battery symbol starts to flash to indicate

that theappliance is charging. When the battery is

fully charged, the battery symbol lights up

continuously.

Using the appliance

Note: This appliance can only be used without

cord.

15

English

Switching the appliance on and off

- To switch on the appliance, press the on/off

button once.

The display lights up for a few seconds.

- To switch off the appliance, press the on/off

button once.

The display lights up for a few seconds and

shows the remaining battery charge.

Shaving

Skin adaptation period

Your first shaves may not bring you the result you

expect and your skin may even become slightly

irritated. This is normal. Your skin and beard need

time to adapt to any new shaving system. To allow

your skin to adapt to this new appliance, we advise

you to shave regularly (at least 3 times a week) and

exclusively with this appliance for a period of 3

weeks.

Shaving tips

- Selectyour personal comfort settings (see ‘The

display’).

- For the best results on skin comfort, pre-trim

your beard if you have not shaved for 3 days or

longer.

Dry shaving

1 Switch on the appliance.

The display lights up for a few seconds.

2 Move the shaving heads over your skin in

circular movements to catch all hairs growing in

different directions. Make sure each shaving

head is fully in contact with the skin. Exert

gentle pressure for a close, comfortable shave.

16

English

Note: Do not press too hard, this can cause skin

irritation.

3 Clean the appliance after use.

Wet shaving

For a more comfortable shave, you can also use

this appliance on a wet face with shaving foam or

shaving gel.

To shave with shaving foam or shaving gel, follow

the steps below:

1 Apply some water to your skin.

2 Apply shaving foam or shaving gel to your skin.

3 Rinse the shaving unit under the tap to ensure

that the shaving unit glides smoothly over your

skin.

4 Switch on the appliance.

5 Move the shaving heads over your skin in

circular movements to catch all hairs growing in

different directions. Make sure each shaving

head is fully in contact with the skin. Exert

gentle pressure for a close, comfortable shave.

Note: Rinse the shaving unit regularly to ensure

that it continues to glide smoothly over your

skin.

17

English

6 Dry your face.

7 Clean the appliance after use.

Note: Make sure you rinse all foam or shaving

gel off the appliance.

Using click-on attachments

Note: The accessories supplied may vary for

different products. The box shows the accessories

that have been supplied with your product.

It is recommended not to use the click-on

cleansing brush attachment, the massage

attachment or fresh eyes attachment directly after

shaving to prevent skin irritation.

Removing or attaching the click-on

attachments

Note: Attach the click-on massage attachment,

cleansing brush attachment and fresh eyes

attachment on the attachment base first, before

placing it on the appliance.

1 Pull the click-on attachment straight off the

attachment base.

2 Place the click-on attachment onto the

attachment base until it locks into position with

a click.

3 Make sure the appliance is switched off.

18

English

4 Pull the attachment straight off the appliance.

Note: Do not twist the attachment while you

pull it off the appliance.

5 Insert the lug of the attachment into the slot in

the top of the appliance. Then press down the

attachment to attach it to the appliance (‘click’).

Using the trimmer attachment

You can use the precision trimmer attachment to

touch up your beard, sideburns and moustache.

1 Attach the attachment to the appliance (‘click’).

2 Switch on the appliance.

The display lights up for a few seconds.

3 Hold the trimmer attachment perpendicular to

the skin and move the appliance downwards

while you exert gentle pressure.

4 Clean the attachment after use (see 'Cleaning

and maintenance').

Using the cleansing brush attachment

After approx. 20 seconds, move the appliance to

your forehead and start cleansing this part of your

face. Gently move the brush head from left to

right.Note: For better shaving results, use the click-

on cleansing brush attachment before shaving.

Use the rotating cleansing brush with your daily

cleansing cream. The cleansing brush removes oil

and dirt, contributing to a healthy and oil-free skin.

We advise you to use it no more than twice a day.

Start with the lowest personal comfort setting to

familiarize yourself with the attachment.

19

English

Do not use the appliance on damaged or irritated

skin or on wounds.

1 Place the attachment on the attachment holder

(see 'Removing or attaching the click-on

attachments').

2 Attach the attachment to the appliance (‘click’).

3 Moisten the attachment with water.

Note: Do not use the appliance with a dry

cleansing brush attachment, as this can irritate

the skin.

4 Moisten your face with water and apply a

cleanser to your face.

5 Place the attachment on your cheek.

6 Switch on the appliance.

20 sec.

7 Gently move the attachment across your skin

from the nose towards the ear. Do not push the

attachment too hard onto the skin to make sure

that the treatment remains comfortable.

Note: Do not cleanse the sensitive area around

your eyes.

20 sec.

8 After approx. 20 seconds, move the appliance

to your other cheek and start cleansing this part

of your face.

20

English

ページが読み込まれています...

Philips SP9851/70 ユーザーマニュアル

このマニュアルも適しています

Philips SP9851/70 ユーザーマニュアル

他の言語で

関連論文

その他のドキュメント