Philips 240S1SB/69 ユーザーマニュアル

Philips LCD 



❍



LCD



1

Philips 24" 1920 × 1200 @60Hz

Windows/

1920 × 1200 (24")

60H

2 3 1920 × 1200@60Hz

(24")

Philips LCD

2 LCD

LCD 60Hz

75Hz

3 .inf .icm (.inf .icm)

(.inf .icm files)

( )

(.inf .icm files)

4

/

Windows®

5

OK() Reset()

6 LCD

7 LCD

8

OSD

1. OK() OSD ()

2. Down Arrow() Color() OK()

a.Color Temperature() 5000K6500K7500K8200K

9300K 11500K 5000K

11500K

b. sRGB (

)

c.User Define()

* () 2004K

9300K 6504K

9 Philips LCD

Philips LCD

VESA Philips VESA

Philips

10

LCD Mac

Philips LCD PCMacs

Mac Philips

11 Philips LCD (Plug-and-Play)

Windows® 95982000XPVista Linux

LCD

12

MVA PVA IPS TN

IPS

13

LCD

14

1920 × 1200@60Hz LCD



Philips

( LED )

OFF()

ON()

( LED )

Energy Saving()

(

)

AUTO () VGA

VGA-Analog(VGA-)

OSD

DVI-Digital(DVI-) Auto Function(

)

Auto()

OSD Main Controls(OSD ) Phase/

Clock of Setup(/)

Auto()

OSD Main Controls(OSD ) Phase/

Clock of Setup(/)

Auto()

OSD Main Controls(OSD ) Phase/

Clock of Setup(/)

On-Screen Display()

LCD

OSD main Controls() Setup(

) Power LED( LED)

Philips


TCO Displays 5.0 Information

Recycling Information for Customers

Waste Electrical and Electronic 
Equipment-WEEE

CE Declaration of Conformity

Federal Communications 
Commission (FCC) Notice (U.S. 
Only)

FCC Declaration of Conformity

Commission Federale de la 
Communication (FCC Declaration)

EN 55022 Compliance (Czech 
Republic Only)

Polish Center for Testing and 
Certification Notice

North Europe (Nordic Countries) 
Information

BSMI Notice (Taiwan Only)

Ergonomie Hinweis (nur 
Deutschland)

Philips End-of-Life Disposal

China RoHS

Lead-free Product

Troubleshooting

Other Related Information

Frequently Asked Questions (FAQs)
Regulatory Information
Available for selective models
TCO Displays 5.0 Information
Congratulations,  
Your display is designed for both you and the planet!
This display carries the TCO Certified label. This ensures that the display is designed for minimal 
impact on the climate and natural environment, while offering all the performance expected from top 
of the line electronic products. TCO Certified is a third party verified program, where every product 
model is tested by an accredited independent test laboratory. TCO Certified represents one of the 
toughest certifications for displays worldwide.
Some of the Usability features of the TCO Displays 5.0 requirements:
Visual Ergonomics
Good visual ergonomics in order to improve the working environment for the user and to reduce sight and strain problems. 
Important parameters are:
●     Light levels without color tint, Uniform color and luminance, Wide color gamut
●     Calibrated color temperature and gamma curve
●     Wide luminance level, Dark black levels, Low motion blur
Electrical Safety
●     Product fulfills rigorous safety standards
Emissions
●     Low alternating electric and magnetic fields emissions
●     Low acoustic noise emissions
Some of the Environmental features of the TCO Displays 5.0 requirements: 
●     The brand owner demonstrates corporate social responsibility and has a certified environmental management system (EMAS or 
ISO 14001)
●     Very low energy consumption both in on- and standby mode
●     Restrictions on chlorinated and brominated flame retardants, plasticizer and polymers
●     Restrictions on heavy metals such as cadmium, mercury and lead (RoHS compliance)
●     Both product and product packaging is prepared for recycling
●     The brand owner offers take-back options
The requirements included in this label have been developed by TCO Development in co-operation with scientists, experts, users 
as well as manufacturers all over the world. Since the end of the 1980s TCO has been involved in influencing the development of 
IT equipment in a more user-friendly direction. Our labeling system started with displays in 1992 and is now requested by users and 
IT-manufacturers all over the world. 
For more information, please visit www.tcodevelopment.com

RETURN TO TOP OF THE PAGE

Recycling Information for Customers

There is currently a system of recycling up and running in the European countries, such as The Netherlands,

Belgium, Norway, Sweden and Denmark.

In Asia Pacific, Taiwan, the products can be taken back by Environment Protection Administration (EPA) to follow the

IT product recycling management process, detail can be found in web site www.epa.gov.tw

The monitor contains parts that could cause damage to the nature environment. Therefore, it is vital that the monitor is recycled at

the end of its life cycle.

For help and service, please contact Consumers Information Center or F1rst Choice Contact Information Center in

each country.

RETURN TO TOP OF THE PAGE

Waste Electrical and Electronic Equipment-WEEE

Attention users in European Union private households

This marking on the product or on its packaging illustrates that, under European Directive 2002/96/

EC governing used electrical and electronic appliances, this product may not be disposed of with normal household

waste. You are responsible for disposal of this equipment through a designated waste electrical and electronic

equipment collection. To determine the locations for dropping off such waste electrical and electronic, contact your

local government office, the waste disposal organization that serves your household or the store at which you purchased

the product.

Attention users in United States:

Like all LCD products, this set contains a lamp with Mercury. Please dispose of according to all Local, State and

Federal laws. For the disposal or recyciing information, contact www.mygreenelectronics.com or www.eiae.org.

RETURN TO TOP OF THE PAGE

EPEAT

“The EPEAT (Electronic Product Environmental Assessment Tool) program evaluates computer desktops, laptops,

and monitors based on 51 environmental criteria developed through an extensive stakeholder consensus process

supported by US EPA.

EPEAT system helps purchasers in the public and private sectors evaluate, compare and select desktop

computers, notebooks and monitors based on their environmental attributes. EPEAT also provides a clear and consistent

set of performance criteria for the design of products, and provides an opportunity for manufacturers to secure

market recognition for efforts to reduce the environmental impact of its products.”

Benefits of EPEAT

Reduce use of primary materials

Reduce use of toxic materials

Avoid the disposal of hazardous waste

RETURN TO TOP OF THE PAGE

ROHS is a European Directive aiming to control the use of certain hazardous substances in the production of new

electrical and electronic equipment. Philips has completely eliminated four of six RoHS-banned substances form its

products by 1998-eight full years before compliance was required and has lowered usage of the remaining

substances significantly below the mandated levels.

RETURN TO TOP OF THE PAGE

CE Declaration of Conformity

This product is in conformity with the following standards

- EN60950-1:2001 (Safety requirement of Information Technology Equipment)

- EN55022:2006 (Radio Disturbance requirement of Information Technology Equipment)

- EN55024:1998 (Immunity requirement of Information Technology Equipment)

- EN61000-3-2:2006 (Limits for Harmonic Current Emission)

- EN61000-3-3:1995 (Limitation of Voltage Fluctuation and Flicker)

following provisions of directives applicable

- 2006/95/EC (Low Voltage Directive)

- 2004/108/EC (EMC Directive)

and is produced by a manufacturing organization on ISO9000 level.

The product also comply with the following standards

- ISO13406-2 (Ergonomic requirement for Flat Panel Display)

- GS EK1-2000 (GS specification)

- prEN50279:1998 (Low Frequency Electric and Magnetic fields for Visual Display)

- MPR-II (MPR:1990:8/1990:10 Low Frequency Electric and Magnetic fields)

- TCO'03, TCO Displays 5.0 (Requirement for Environment Labelling of Ergonomics, Energy, Ecology and Emission,

TCO: Swedish Confederation of Professional Employees) for TCO versions

RETURN TO TOP OF THE PAGE

Federal Communications Commission (FCC) Notice (U.S. Only)

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment.

Use only RF shielded cable that was supplied with the monitor when connecting this monitor to a computer device.

To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or excessive moisture.

THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE-

CAUSING EQUIPMENT REGULATIONS.

RETURN TO TOP OF THE PAGE

FCC Declaration of Conformity

Declaration of Conformity for Products Marked with FCC Logo,

United States Only

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause

harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RETURN TO TOP OF THE PAGE

Commission Federale de la Communication (FCC Declaration)

Cet équipement a été testé et déclaré conforme auxlimites des appareils numériques de

class B,aux termes de l'article 15 Des règles de la FCC. Ces limites sont conçues de façon

à fourir une protection raisonnable contre les interférences nuisibles dans le cadre d'une

installation résidentielle. CET appareil produit, utilise et peut émettre des hyperfréquences

qui, si l'appareil n'est pas installé et utilisé selon les consignes données, peuvent causer

des interférences nuisibles aux communications radio. Cependant, rien ne peut garantir

l'absence d'interférences dans le cadre d'une installation particulière. Si cet appareil est la

cause d'interférences nuisibles pour la réception des signaux de radio ou de télévision, ce

qui peut être décelé en fermant l'équipement, puis en le remettant en fonction, l'utilisateur

pourrait essayer de corriger la situation en prenant les mesures suivantes:

Réorienter ou déplacer l'antenne de réception.

Augmenter la distance entre l'équipement et le récepteur.

Brancher l'équipement sur un autre circuit que celui utilisé par le récepteur.

Demander l'aide du marchand ou d'un technicien chevronné en radio/télévision.

Toutes modifications n'ayant pas reçu l'approbation des services compétents en matière de

conformité est susceptible d'interdire à l'utilisateur l'usage du présent équipement.

N'utiliser que des câbles RF armés pour les connections avec des ordinateurs ou périphériques.

CET APPAREIL NUMERIQUE DE LA CLASSE B RESPECTE TOUTES LES EXIGENCES DU REGLEMENT SUR

LE MATERIEL BROUILLEUR DU CANADA.

RETURN TO TOP OF THE PAGE

EN 55022 Compliance (Czech Republic Only)

RETURN TO TOP OF THE PAGE

Polish Center for Testing and Certification Notice

The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment

that works together (computer, monitor, printer, and so on) should have the same power supply source.

The phasing conductor of the room's electrical installation should have a reserve short-circuit protection device in the form

of a fuse with a nominal value no larger than 16 amperes (A).

To completely switch off the equipment, the power supply cable must be removed from the power supply socket,

which should be located near the equipment and easily accessible.

A protection mark "B" confirms that the equipment is in compliance with the protection usage requirements of standards

PN-93/T-42107 and PN-89/E-06251.

RETURN TO TOP OF THE PAGE

North Europe (Nordic Countries) Information

Placering/Ventilation

VARNING:

FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR

DU STÄLLER DIN UTRUSTNING PÅPLATS.

Placering/Ventilation

ADVARSEL:

SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT

ER NEMT TILGÆNGELIGE.

Paikka/Ilmankierto

VAROITUS:

SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI

IRROTTAA PISTORASIASTA.

Plassering/Ventilasjon

ADVARSEL:

NÅR DETTE UTSTYRET PLASSERES, MÅ DU PASSE PÅ AT KONTAKTENE FOR

STØMTILFØRSEL ER LETTE Å NÅ.

RETURN TO TOP OF THE PAGE

BSMI Notice (Taiwan Only)

RETURN TO TOP OF THE PAGE

Ergonomie Hinweis (nur Deutschland)

Der von uns gelieferte Farbmonitor entspricht den in der "Verordnung über den Schutz vor Schäden durch

Röntgenstrahlen" festgelegten Vorschriften.

Auf der Rückwand des Gerätes befindet sich ein Aufkleber, der auf die Unbedenklichkeit der Inbetriebnahme hinweist, da

die Vorschriften über die Bauart von Störstrahlern nach Anlage III ¤ 5 Abs. 4 der Röntgenverordnung erfüllt sind.

Damit Ihr Monitor immer den in der Zulassung geforderten Werten entspricht, ist darauf zu achten, daß

Reparaturen nur durch Fachpersonal durchgeführt werden.

nur original-Ersatzteile verwendet werden.

bei Ersatz der Bildröhre nur eine bauartgleiche eingebaut wird.

Aus ergonomischen Gründen wird empfohlen, die Grundfarben Blau und Rot nicht auf dunklem

Untergrund zu verwenden (schlechte Lesbarkeit und erhöhte Augenbelastung bei zu geringem

Zeichenkontrast wären die Folge).

Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 beträgt 70dB (A) oder weniger.

ACHTUNG: BEIM AUFSTELLEN DIESES GERÄTES DARAUF ACHTEN, DAß

NETZSTECKER UND NETZKABELANSCHLUß LEICHT ZUGÄNGLICH SIND.

RETURN TO TOP OF THE PAGE

End-of-Life Disposal

Your new monitor contains materials that can be recycled and reused. Specialized companies can recycle your product

to increase the amount of reusable materials and to minimize the amount to be disposed of.

Please find out about the local regulations on how to dispose of your old monitor from your sales representative.

(For customers in Canada and U.S.A.)

This product may contain lead and/or mercury. Dispose of in accordance to local-state and federal regulations.

For additional information on recycling contact www.eia.org (Consumer Education Initiative)

RETURN TO TOP OF THE PAGE

China RoHS

The People's Republic of China released a regulation called "Management Methods for Controlling Pollution by

Electronic Information Products" or commonly referred to as China RoHS. All products including CRT and LCD monitor

which are produced and sold for China market have to meet China RoHS request.

RETURN TO TOP OF THE PAGE

Lead-free Product

Philips eliminated toxic substances like lead from its displays. Lead-free display helps protect your health and

promotes environmentally sound recovery and disposal of waste from electrical and electronic equipment.

PHILIPS Brand designs and produces display products in compliance with strict Restriction of Hazardous

Substances (RoHS) european legislation that restrict lead and other toxic.

RETURN TO TOP OF THE PAGE

 
 

ページが読み込まれています...

Philips 240S1SB/69 ユーザーマニュアル

このマニュアルも適しています

Philips 240S1SB/69 ユーザーマニュアル

関連論文