ページを読み込んでいます...
FCC Compliance Statement:
This equipment has been tested and found to
comply with limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable
protection against harmful interference in
residential installations. This equipment
generates, uses, and can radiate radio
frequency energy, and if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause interference to radio or
television equipment reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna
-Move the equipment away from the receiver
-Plug the equipment into an outlet on a circuit different from that to which
the receiver is connected
-Consult the dealer or an experienced radio/television technician for
additional suggestions
You are cautioned that any change or modifications to the equipment not
expressly approve by the party responsible for compliance could void Your
authority to operate such equipment.
This device complies with Part 15 of the FCC Rules. Operation is subjected to
the following two conditions 1) this device may not cause harmful interference
and 2) this device must accept any interference received, including interference
that may cause undesired operation.
DECLARATION OF CONFORMITY
Per FCC Part 2 Section 2. 1077(a)
Responsible Party Name: G.B.T. INC.
Address: 18305 Valley Blvd., Suite#A
LA Puent, CA 91744
Phone/Fax No: (818) 854-9338/ (818) 854-9339
hereby declares that the product
Product Name:
Model Number:
Mother Board
Conforms to the following specifications:
FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a),
Class B Digital Device
Supplementary Information:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful
and (2) this device must accept any inference received, including
that may cause undesired operation.
Representative Person's Name: ERIC LU
Signature:
Date: Sep. 26, 2001
Eric Lu
GA-7VTX-P
Declaration of Conformity
We, Manufacturer/Importer
(full address)
G.B.T. Technology Träding GMbH
Ausschlager Weg 41, 1F, 20537 Hamburg, Germany
declare that the product
( description of the apparatus, system, installation to which it refers)
Mother Board
GA-7VTX-P
is in conformity with
(reference to the specification under which conformity is declared)
in accordance with 89/336 EEC-EMC Directive
EN 55011 Limits and methods of measurement EN 61000-3-2* Disturbances in supply systems caused
of radio disturbance characteristics of EN60555-2 by household appliances and similar
industrial, scientific and medical (ISM electrical equipment “Harmonics”
high frequency equipment
EN55013 Limits and methods of measurement EN61000-3-3* Disturbances in supply systems caused
of radio disturbance characteristics of EN60555-3 by household appliances and similar
broadcast receivers and associated electrical equipment “Voltage fluctuations”
equipment
EN 55014 Limits and methods of measurement EN 50081-1 Generic emission standard Part 1:
of radio disturbance characteristics of Residual, commercial and light industry
household electrical appliances,
portable tools and similar electrical EN 50082-1 Generic immunity standard Part 1:
apparatus Residual, commercial and light industry
EN 55015 Limits and methods of measurement EN 55081-2 Generic emission standard Part 2:
of radio disturbance characteristics of Industrial environment
fluorescent lamps and luminaries
EN 55020 Immunity from radio interference of EN 55082-2 Generic immunity standard Part 2:
broadcast receivers and associated Industrial environment
equipment
EN 55022 Limits and methods of measurement ENV 55104 Immunity requirements for household
of radio disturbance characteristics of appliances tools and similar apparatus
information technology equipment
DIN VDE 0855 Cabled distribution systems; Equipment EN 50091- 2 EMC requirements for uninterruptible
part 10 for receiving and/or distribution from power systems (UPS)
part 12 sound and television signals
CE marking (EC conformity marking)
The manufacturer also declares the conformity of above mentioned product
with the actual required safety standards in accordance with LVD 73/23 EEC
EN 60065 Safety requirements for mains operated EN 60950 Safety for information technology equipment
electronic and related apparatus for including electrical business equipment
household and similar general use
EN 60335 Safety of household and similar EN 50091-1 General and Safety requirements for
electrical appliances uninterruptible power systems (UPS)
Manufacturer/Importer
Signature : Rex Lin
(Stamp) Date : Sep. 26, 2001 Name : Rex Lin
7VTX-P
AMD AthlonTM/DuronTM Socket A
AMD AthlonTM/DuronTM Socket A
REV. 1.0 First Edition
12MC-7VTXP-1001
1)
2)
3)
4)
5)
6) Suspend to RAM STR
7) Four Speaker SPDIF Four Speaker SPDIF
8) @BIOSTM EasyTuneIIITM @BIOSTM EasyTuneIIITM
9) BIOS BIOS
10)
11)
P.1
P.2
P.3
7VTX-P P.5
P.6
P.14
P.38
Suspend to RAM P.39
BIOS(Dual BIOS) P.45
Four Speaker SPDIF P.52
@BIOSTM P.58
EasyTuneIIITM P.59
BIOS P.60
/ P.87
P.88
7VTX-P
1
1.0 7VTX-P Sep. 2001
, .
2001 924
2
þ 7VTX-P
þ
þ
þ 7VTX-P
7VTX-P
3
Ÿ ATX 31.1 x 25.3
CPU Ÿ AMD AthlonTM/DuronTM (K7) Socket A
Ÿ 128K 256K/ 64K
CPU
Ÿ 500MHz ~ 1.2G
7VTX-P
Ÿ VIA KT266A Memory/PCI/AGP
Ÿ VT8233
Ÿ W255/W312/SOP48
Ÿ 105/110/115/133 MHz system bus speeds
Ÿ 100~170 MHz
Ÿ 200/266 MHz FSB
Ÿ 3 184-pin DDR DIMM
Ÿ PC200/266 DDR SDRAM
Ÿ 3 GB DRAM
Ÿ 2.5V DDR SDRAM
I/O Ÿ IT8705
Ÿ 1AGP 4AGP 2.0
Ÿ 5 32-bit PCI Bus
( 33MHz PCI 2.2 )
Ÿ 1AMR (Audio Modem Riser)
IDE Ÿ 2 IDE bus master (ATA 66/ATA 100) IDE
4 ATAPI
Ÿ PIO mode 3 4UDMA 33/ATA 66 IDE ATAPI
CD-ROM
Ÿ 1
(360K 720K 1.2M 1.44M 2.88M bytes)
Ÿ 1 SPP/EPP/ECP
Ÿ 2 (COM A COM B)
Ÿ 6USB
Ÿ 1(IR ) …
4
Ÿ CPU/
Ÿ CPU/
Ÿ
Ÿ Creative CT5880
Ÿ Line In / Line Out / Mic In / AUX In / CD In / TEL /
Game Port / Four Speaker
PS/2 Ÿ PS/2 PS/2
BIOS Ÿ AMI BIOS 2M bit
Ÿ BIOS (Dual BIOS)
Ÿ
Ÿ /
Ÿ USB /STR
Ÿ 3
Ÿ
Ÿ STR (Suspend-To-RAM)
7VTX-P
5
7VTX-P
LED1
7VTX-P
PCI 1
PCI 2
VT8233
KT266A
COM B
COMA
LPT
PS/2
Main
BIOS
PWR
FAN
AUX_IN
TELE
BAT1
SYS
FAN
FDD
IDE2
IDE1
CLK SW
F PANEL
RAM
_LED
WOL
SMB
KBMS_
ON
USB1
AMR
PCI 3
USB2
GUARDIAN
ATX POWER
NB FAN
CPU_FAN
F Audio
AMR_EN1
USB3
FUSB
_ON
STR
_EN
AGP_OV
GAME & AUDIO
BZ1
PCI 4
PCI 5
DDR 1
DDR 2
DDR 3
AGP PRO
RUSB_ON
CD_IN
FMIC_EN
CT5880
RAM_OV
WOR
Backup
BIOS
AGP_USB1
AMR_USB1
AMR_USB2
AGP_USB2
CI
BIOS
WP
CLR CMOS
BUZ EN
IR SCR
CK_RATIO Socket A
CPU
SIGMATE
9708
AMR_EN2
APG_12V
IT8705
S_IRQ
6
!
1.
2.
3. (CPU RAM)
4.
5. ATX
…
PCB
7VTX-P
7
1 – Jumper
2 – (CPU)
3 –
4 –
5 –
6 – BIOS
7 –
STEP 1
STEP 1
STEP 2 STEP 3
STEP 5
STEP 4
STEP 5
STEP 5
8
CPU
DIP switch CLK_SW 100MHz ~170MHz
(CPU )
Clock Frequency Table
CLK_SW O:ON / X:OFF
CPU AGP PCI 1 2 3 4 5
133.3 66.6 33.3 X X X X X
100 66.6 33.3 O X X X O
166.6 66.6 33.3 X O X X X
110 73.3 33.3 O X O X O
120 60 30 X O O X O
140 70 35 O O O X X
150 75 37.5 X X X O X
170 68 34 O X X O X
ON
100 MHz
5 4 3 2 1
ON
133 MHz
5 4 3 2 1
ÚCPU
CK_RATIO: Frequency Override
Ratio 1 2 3 4 5
Auto X X X X O
5X O O X O X
5.5X X O X O X
6X O X X O X
6.5X X X X O X
7X O O O X X
7.5X X O O X X
8X O X O X X
8.5X X X O X X
9X O O X X X
9.5X X O X X X
10X O X X X X
10.5X X X X X X
11X O O O O X
11.5X X O O O X
12X O X O O X
>=12.5X X X O O X
ON
1 2 3 4 5
O:ON, X:OFF
ÚAuto
7VTX-P
9
(CPU)
1.
2. .
10
CPU :
, ,
3.
4. AMD .
5. .
6. CPU CPU .
( )
7VTX-P
11
DDR:
3(DIMM) BIOS
DIMM
Registered DDR DIMM
Devices used on
DIMM 1 DIMM
x64/x72 2 DIMMs
x64/x72 3 DIMMs
64 Mbit
(4Mx4x4 banks) 256 MBytes 512 MBytes 768 MBytes
64 Mbit
(2Mx8x4 banks) 128 MBytes 256 MBytes 384 MBytes
64 Mbit
(1Mx16x4 banks) 64 MBytes 128 MBytes 192 MBytes
128 Mbit
(8Mx4x4 banks) 512 MBytes 1 GBytes 1.5 GBytes
128 Mbit
(4Mx8x4 banks) 256 MBytes 512 MBytes 768 MBytes
128 Mbit
(2Mx16x4 banks) 128 MBytes 256 MBytes 384 MBytes
256 Mbit
(16Mx4x4 banks) 1 GBytes 2 GBytes 3 GBytes
256 Mbit
(8Mx8x4 banks) 512 MBytes 1 GBytes 1.5 GBytes
256 Mbit
(4Mx16x4 banks) 256 MBytes 512 MBytes 768 MBytes
512 Mbit
(16Mx8x4 banks) 1 GBytes 2 GBytes 3 GBytes
512 Mbit
(8Mx16x4 banks) 512 MBytes 1 GBytes 1.5 GBytes
12
Unbuffered DDR DIMM
Devices used on
DIMM 1 DIMM
x64/x72 2 DIMMs
x64/x72 3 DIMMs
64 Mbit
(2Mx8x4 banks) 128 MBytes 256 MBytes 384 MBytes
64 Mbit
(1Mx16x4 banks) 64 MBytes 128 MBytes 192 MBytes
128 Mbit
(4Mx8x4 banks) 256 MBytes 512 MBytes 768 MBytes
128 Mbit
(2Mx16x4 banks) 128 MBytes 256 MBytes 384 MBytes
256 Mbit
(8Mx8x4 banks) 512 MBytes 1 GBytes 1.5 GBytes
256 Mbit
(4Mx16x4 banks) 256 MBytes 512 MBytes 768 MBytes
512 Mbit
(16Mx8x4 banks) 1 GBytes 2 GBytes 3 GBytes
512 Mbit
(8Mx16x4 banks) 512 MBytes 1 GBytes 1.5 GBytes
7VTX-P
13
DDR
1.
2. DIMM DIMM
3.
DIMM
DIMM
DDR
DDR (Double Data Rate) PC SDRAM SDRAM DDR
OEM
DDR SDRAM
SDRAM DDR SDRAM
DDR 2.1GB/s DDR
DRAM
PC SDRAM 3.3 volts
DDR 2.5 volts DDR
/