DZOFILM CINE Gnosis Macro Prime Lens ユーザーマニュアル
- タイプ
- ユーザーマニュアル
GNOSIS MACRO PRIME LENS
USER’S MANUAL
观系列微距定焦镜头使用说明书
www.dzofilm.com
电影镜头
CINE LENS
Introduction ...................................................................................1
Safety Notes..................................................................................1
Lens Parts ..................................................................................... 2
Lens Control.................................................................................. 3
Flange Back Adjustment............................................................ 5
1. Preparation........................................................................... 5
2. Flange Back Adjustment ................................................... 6
Specification................................................................................. 8
After-sales Service ...................................................................... 9
The Name and Content of Hazardous Substances............. 11
Contents
Click to go
Users can read the table of content(TOC) to have an overview of the
Gnosis Product Manual. Please clink on the title or link to jump to the TOC
Search keyword
The Search-keyword Function is available in PDF Document. For
example,
In WPS Office, Windows users can search keywords with the keyboard
shortcut <Ctrl+F> and Mac users can execute the same function with
shortcut <Command+F>
Note
1
Introduction
Safety Notes
Magnification RatioExposure Compensation Identification
Magnification Ratio:
the magnification ratio under ongoing focusing distance.
Exposure Compensation:
the difference between actual T value and the
directing T value on aperture ring. When the Exposure compensation
identification is 4.18, Actual T Value=T Value showing on the aperture ring+4.18.
4
Back to Contents
Magnification Ratio、
Exposure Compensation Identification
1:10
+0.1
1.Preparation
Every Gnosis lens will process flange back adjustment on standard.
But due to the tolerance of different cameras, to achieve the best
performance of this product and to match the cameras, please adjust
flange back of the product.
Take
Gnosis 32mm
as an example:
Step Two : Attach the lens to the camera and adjust the aperture to T4;
Step Three :
Make the pointer align with the 0.33m scale on focusing
ring, paste calibration tool on the ring with middle line of the tool
aligning
the 0.33m scale and the scale pointer (or choose 1’1 focusing scale).
Step One :
Ready your subject and calibration tool. You can use a "Star
Chart",
or other high-resolution black-and-white objects;download the "Back focus
Calibration Tool for Prime Lens"(short for “Calibration Tool”) on the
official website.
Note :
You can download and print the chart on DZOFILM website-Down-
load-Star Chart for Adjusting Back Flange（Click to jump to the website）
5
Flange Back Adjustment
Back to Contents
4
2.Flange Back Adjustment
Please adjust as the following steps:
Step Four :
Set the object 0.33m away from the camera sensor plane,
and adjust it to the center of the whole image.
Step One :
Rotate the focus ring until the image to its clearest. Take the
horizontal line in the middle of the calibration tool as the reference and
observe the position of the deviating scale pointer to get the number
of
horizontal lines.
Step Two :
According to the deviation value and the reference below,
add or subtract the corresponding shim to complete the flange back
adjustment.
Note: The direction of infinity indicates positive deviation value.
The direction of the closest focusing distance indicates negative
deviation value.
If there are more than three horizontal lines, add or subtract the
corresponding value.
Example:
I f the scale pointer points to 3 spaces in the direction of the closest
focusing distance, the deviation value is -3.
If the scale pointer points to 4 spaces in the direction of infinity, the deviation
value is +4. At this situation, the shim value of "+3" needs to be added to the
shim value of "+1".
Set the object 0.33m away from the camera sensor
plane, and adjust it to the center of the whole image.
T4 Aperture
6
0.33m
Φ
Back to Contents
7
Note: Shim adjustment: "+" means adding shims, and "-" decreasing shims.
Gnosis Adjustment Reference
0
0
0
0
Data Interface Usage
new system without calibration.
Specification
Specification
Name
Colour
Focal Length
Mount
Aperture
Image Circle
Construction
of Optics
Flange Distance
Close Focus
（from sensor plane )
（metric/imperial）
Max.Mag. Ratio
Iris Control
Focus Control Manual（max 300°）
Length
（metric/imperial） 112mm
Iris Blade 16
Filter Size M105
Gear Pitch 0.8M
Material Aluminium alloy
Weight 1447.5g1460g 1280.5g
∮114mm
Manual
（max 55°）
Manual
（max 67°）
Manual
（Manual, max 68°）
1.33X1.0X 1.5X
44mm(LPL)/52mm(PL)/44mm(EF)
11 Elements in
8 Groups
11 Elements in
9 Groups
11 Elements in
9 Groups
0.237m/9.36in 0.258m/10.2in0.167m/6.6in
LPL/PL/EF
∮46.5mm(VV/FF）
65mm 90mm32mm
Black
T2.8-T22
Front Dia.
(metric/imperial)
Gnosis
How to Obtain After-Sales Service
Warranty Service
Service Outside the Warranty Period
Service Turn Around Time
Aer-sales Service
10
What This After-Sales Policy Does NOT Cover
Privacy
×
×
×
×
×
×
Hazardous Substances
×:
Cd
○:
×
o
11
The Name and Content of Hazardous Substances
s
简介 ..................................................................................................1
安全注意事项....................................................................................1
镜头部件 .......................................................................................... 2
镜头控制 .......................................................................................... 3
后焦调节 .......................................................................................... 5
1.准备工作 ................................................................................... 5
2.调节后焦 .................................................................................. 6
技术规格 .......................................................................................... 7
售后服务 .......................................................................................... 8
产品中有害物质的名称及含量 ......................................................... 9
阅读小贴士
目录
1
简介
安全注意事项
1.准备工作
观（Gnosis）系列镜头在出厂前会按照标准调整后焦，但不同摄影机的法兰
距在出厂时可能会有一点不同，为了方便与不同的摄影机匹配，达到最佳成像效
果，需要进行后焦调节操作。
准备好拍摄对象和校准工具。可使用“星状测试图”，或使用其它黑白
相间的、对比度较高的拍摄对象。在官网下载“定焦镜头后焦校准工具”
以下操作以观（Gnosis）系列32mm镜头为例
步骤二 将镜头安装到相机或摄影机上并调整光圈为T4；
将拍摄对象放置在距离相机成像面约0.33m处，并调整其位置在画
面中心。
将“定焦镜头后焦校准工具”贴在0.33m对焦刻度处（或选择1’1的对
焦刻度线），刻度指针与“定焦镜头后焦校准工具”中间横线平齐；
步骤三
步骤四：
步骤一：
：
：
提 示 可前往 “DZOFILM官网-资料下载-后焦调整星图”处下载：（点击此处跳转）
（点击此处跳转）
5
后焦调节
回到目录
4
2.调节后焦
根据刻度偏移值，参考下表调整相应的垫片，即可完成后焦调整。
调节过程，请执行以下步骤。
步骤一 旋转对焦环直至画面达到清晰状态，以“定焦镜头后焦校准工具 ”中间
的横线为基准，观察此刻刻度指针的位置，并观察刻度指针偏移的横
线条数；
：
：
步骤二
注 意 若偏向无穷远方向，则代表刻度偏移值为正数；
若偏向最近对焦距离方向，则代表刻度偏移值为负数；
若超过三格横线，则用对应数值加减即可。
：
举 例 若刻度指针指向的刻度线朝最近对焦距离方向偏移3格，则刻度偏移
值为-3；
若刻度指针指向的刻度线朝无限远距离方向偏移4格，则刻度偏移值
为+4，此时需把“+3”的垫片值加上“+1”的垫片值即可。
：
提 示 后焦垫片调整值，“+”代表要增加垫片厚度，“-”代表减少垫片厚度。
：
0.33m
将拍摄对象在距离相机成像画面“Φ”标记处约0.33m放置，
将拍摄对象位于画面中心。
T4光圈
Φ
观（GNOSIS）系列后焦调整表
后焦垫片调整
参考值(mm)
刻度偏移值刻度基准值
0.33m/1’1
0.32m/12.6“
0.291m/1’
偏移方向 最近对焦距离方向偏移 无限远方向偏移
焦段
32mm
65mm
90mm
-0.68 -0.52 -0.25 0+0.22 +0.41 +0.65
-3 -2 -1 0+1 +2 +3
-1.7 -1.16 -0.55 0+0.56 +1.1 +1.7
-2.14 -1.4 -0.88 0+0.72 +1.48 +2.32
6
回到目录
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
