Disassembly of the blades & front guard
1. Use a screwdriver to loosen and then take out a screw on the right side of the
back guard.
2. Hold the ring guard and turn the front guard anti-clockwise to the left and remove it.
3. Hold the blade and rotate the knob clockwise direction.
4. You can clean inside after removing the fan blade and front guard. The front guard
(inner lids of aroma box must be removed), fan blade and back cover can be cleaned.
Please be sure to store in a dry environment after cleaning.
③ ④
① ②
fan blade
Match
fan blade
groove motor
shaft pin