Philips 17S1SB/93 ユーザーマニュアル

Philips LCD 



安全措施及维修



常见问题



故障检修



有关规定

安全和故障检修

安全措施与维修

警告：使用本文件规定以外的控制、调整或程序，可能导致遭受电击、触电以及/

或者机械危险。

连接和使用电脑显示器时，请阅读并遵循以下说明：

❍

重要: 显示器无人看管时务必启动移动的屏幕保护程序。如果您的显示器将显示不变的

静态内容，务必启动定时屏幕刷新应用程序。长时间不间断显示静止或静态图像可能会

在屏幕上造成“烙印”，也称“残像”或“余像”。“烙印”、“残像”或“余像”是

液晶屏技术的一个常见现象。多数情况下，关掉电源一定时间后，“烙印”、“残

像”或“余像”会逐渐消失。

返回页首



LCD



1

“Cannot display this video mode”

Philips 17" 1280x1024 @60Hz

PC

Windows“”“/” “”

“” “”“” “”

“” 1280x1024 (17")

“” 60Hz“”

2 3 PC

1280x1024@60Hz (17")

Philips LCD

PC

2 LCD

LCD 60Hz

75Hz

3 .inf .icm .inf .icm

.inf .icm

4

/

Windows® “”

5

“”“”

6 LCD

7 LCD

8

OSD

1. “” OSD

2. “”“”“” 3

a. 6 5000K6500K7500K8200K9300K

11500K 5000K “warm”

11500K “cool”

b. sRGB

c.

*

2004K 9300K

6504K

9 Philips LCD

Philips LCD VESA

Philips VESA

Philips

10

LCD PC Mac

Philips LCD PCMac

Mac

Philips

11 Philips LCD

Windows® 95982000XPVista Linux

LCD

12

MVA PVA IPS TN

IPS

13

LCD

14

LCD 1280x1024@60Hz



Philips

LED

OFF

ON

LED

“” VGA

VGA

OSD DVI

“”

OSD “”“/”

PC

“”

OSD “”“/”

“”

OSD “”“/”

OSD

LCD

PC

“”

OSD “”“ LED”“

”

Philips


TCO'03 Information

TCO'06 Information

Recycling Information for Customers

Waste Electrical and Electronic 
Equipment-WEEE

CE Declaration of Conformity

Energy Star Declaration

Federal Communications 
Commission (FCC) Notice (U.S. 
Only)

FCC Declaration of Conformity
c Commission Federale de la 
Communication (FCC Declaration)

EN 55022 Compliance (Czech 
Republic Only)

Polish Center for Testing and 
Certification Notice

North Europe (Nordic Countries) 
Information

BSMI Notice (Taiwan Only)

Ergonomie Hinweis (nur 
Deutschland)
. Philips End-of-Life Disposal

China RoHS

Lead-free Product

Troubleshooting

Other Related Information

Frequently Asked Questions (FAQs)
Regulatory Information
Product name: 17S1
Model No: MNS1170I
TCO'03 Information
Congratulations! 
The display you have just purchased carries the TCO'03 Displays label. This means 
that your display is designed, manufactured and tested according to some of the 
strictest quality and environmental requirements in the world. This makes for a high 
performance product, designed with the user in focus that also minimizes the impact 
on our natural environment.
*available for selective models
Some of the features of the TCO'03 Display requirements. 
Ergonomics
Good visual ergonomics and image quality in order to improve the working environment for the user and 
to reduce sight and strain problems. Important parameters are luminance, contrast, resoluction, 
reflectance, colour rendition and image stability.
Energy
Energy-saving mode after a certain time-beneficial both for the user and the environment
Electrical safety
Emissions
Electromagnetic fields
Noise emissions
Ecology
The product must be prepared for recycling and the manufacturer must have a certified environmental 
management system such as EMAS or ISO 14 000
Restrictions on
❍ chlorinated and brominated flame retardants and polymers 
❍ heavy metals such as cadmium, mercury and lead.

TCO'06 Information

Congratulations!

The product you have just purchased carries the TCO’06 Media Displays label. This

means that your display is designed and manufactured according to some of the

strictest performance and environmental criteria in the world. The manufacturer of

this display has selected it to be certified to TCO’06 Media Displays as a sign of

usability, high performance and reduced impact on the natural environment.

*available for selective models

Products certified to TCO´06 Media Displays are specifically designed for high quality reproduction of moving

images. Features such as luminance, color rendition and response time are important when watching TV or

working with media, graphics, web design and other applications that demand outstanding moving images. *

Other features of TCO’06 Media Displays:

Ergonomics

Good visual ergonomics and image quality in order to reduce vision and strain problems. Criteria for

luminance, contrast, resolution, reflectance, color rendition and response time.

Energy

Energy saving mode – beneficial both for the user and the environment

Electrical safety

Emissions

Low electromagnetic fields surrounding the display

Ecology

Product is designed for recycling. Manufacturer must have a certified environmental management system

such as EMAS or ISO 14 001

Restrictions on

❍ Chlorinated and brominated flame retardants and polymers.

❍ Hazardous heavy metals such as cadmium, mercury, hexavalent chromium and lead.

The requirements included in this label have been developed by TCO Development in co-operation with

scientists, experts, users as well as manufacturers all over the world. Since the end of the 1980s TCO has been

involved in influencing the development of IT equipment in a more user-friendly direction. Our labelling system

started with displays in 1992 and is now requested by users and IT-manufacturers all over the world.

For more information, please visit

www.tcodevelopment.com

RETURN TO TOP OF THE PAGE

Recycling Information for Customers

Philips establishes technically and economically viable objectives to optimize the environmental performance of

the organization's product, service and activities.

From the planning, design and production stages, Philips emphasizes the important of making products that can

easily be recycled. At Philips, end-of-life management primarily entails participation in national take-back

initiatives and recycling programs whenever possible, preferably in cooperation with competitors.

There is currently a system of recycling up and running in the European countries, such as The Netherlands,

Belgium, Norway, Sweden and Denmark.

In U.S.A., Philips Consumer Electronics North America has contributed funds for the Electronic Industries

Alliance (EIA) Electronics Recycling Project and state recycling initiatives for end-of-life electronics products from

household sources. In addition, the Northeast Recycling Council (NERC) - a multi-state non-profit organization

focused on promoting recycling market development - plans to implement a recycling program.

In Asia Pacific, Taiwan, the products can be taken back by Environment Protection Administration (EPA) to

follow the IT product recycling management process, detail can be found in web site www.epa.gov.tw

The monitor contains parts that could cause damage to the nature environment. Therefore, it is vital that the monitor is

recycled at the end of its life cycle.

For help and service, please contact Consumers Information Center or F1rst Choice Contact Information Center

in each country.

RETURN TO TOP OF THE PAGE

Waste Electrical and Electronic Equipment-WEEE

Attention users in European Union private households

This marking on the product or on its packaging illustrates that, under European Directive 2002/96/

EC governing used electrical and electronic appliances, this product may not be disposed of with normal

household waste. You are responsible for disposal of this equipment through a designated waste electrical and

electronic equipment collection. To determine the locations for dropping off such waste electrical and electronic,

contact your local government office, the waste disposal organization that serves your household or the store at

which you purchased the product.

Attention users in United States:

Like all LCD products, this set contains a lamp with Mercury. Please dispose of according to all Local, State and

Federal laws. For the disposal or recyciing information, contact www.mygreenelectronics.com or www.eiae.org.

RETURN TO TOP OF THE PAGE

EPEAT

“The EPEAT (Electronic Product Environmental Assessment Tool) program evaluates computer desktops,

laptops, and monitors based on 51 environmental criteria developed through an extensive stakeholder

consensus process supported by US EPA.

EPEAT system helps purchasers in the public and private sectors evaluate, compare and select desktop

computers, notebooks and monitors based on their environmental attributes. EPEAT also provides a clear and

consistent set of performance criteria for the design of products, and provides an opportunity for manufacturers

to secure market recognition for efforts to reduce the environmental impact of its products.”

Benefits of EPEAT

Reduce use of primary materials

Reduce use of toxic materials

Avoid the disposal of hazardous waste

EPEAT’S requirement that all registered products meet ENERGY STAR’s energy efficiency specifications,

means that these products will consume less energy throughout their life.

RETURN TO TOP OF THE PAGE

ROHS is a European Directive aiming to control the use of certain hazardous substances in the production of

new electrical and electronic equipment. Philips has completely eliminated four of six RoHS-banned substances

form its products by 1998-eight full years before compliance was required and has lowered usage of the

remaining substances significantly below the mandated levels.

RETURN TO TOP OF THE PAGE

CE Declaration of Conformity

Philips Consumer Electronics declare under our responsibility that the product is in conformity with the following

standards

- EN60950-1:2001 (Safety requirement of Information Technology Equipment)

- EN55022:2006 (Radio Disturbance requirement of Information Technology Equipment)

- EN55024:1998+A1:2001+A2:2003 (Immunity requirement of Information Technology Equipment)

- EN61000-3-2:2000 or EN61000-3-2:2006(Limits for Harmonic Current Emission)

- EN61000-3-3:1995+A1:2001+A2:2005 (Limitation of Voltage Fluctuation and Flicker)

following provisions of directives applicable

- 73/23/EEC (Low Voltage Directive)

- 2004/108/EC(EMC Directive)

- 2006/95/EC (Low Voltage Directive)

and is produced by a manufacturing organization on ISO9000 level.

The product also comply with the following standards

- ISO13406-2 (Ergonomic requirement for Flat Panel Display)

- GS EK1-2000 (GS specification)

- prEN50279:1998 (Low Frequency Electric and Magnetic fields for Visual Display)

- MPR-II (MPR:1990:8/1990:10 Low Frequency Electric and Magnetic fields)

- TCO'03 (Requirement for Environment Labelling of Ergonomics, Energy, Ecology and Emission, TCO: Swedish

Confederation of Professional Employees) for TCO versions

RETURN TO TOP OF THE PAGE

Energy Star Declaration

This monitor is equipped with a function for saving energy which supports the VESA DPM

standard. This means that the monitor must be connected to a computer which supports VESA

DPM. Time settings are adjusted from the system unit by software.

VESA State LED Indicator Power Consumption

Normal operation ON (Active) White < 15.3 W (typ.)

Power Saving

Alternative 2

One step

Sleep White (blinking) < 0.8 W (typ.)

Switch Off Off < 0.5 W (typ.)

As an ENERGY STAR

®

Partner, PHILIPS has determined that this product meets

the

ENERGY STAR

®

guidelines for energy efficiency.

We recommend you switch off the monitor when it is not in use for a long time.

RETURN TO TOP OF THE PAGE

Federal Communications Commission (FCC) Notice (U.S. Only)

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment.

Use only RF shielded cable that was supplied with the monitor when connecting this monitor to a computer

device.

To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or excessive

moisture.

THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE-

CAUSING EQUIPMENT REGULATIONS.

RETURN TO TOP OF THE PAGE

FCC Declaration of Conformity

Trade Name: Philips

Responsible Party:

Philips Consumer Electronics North America

P.O. Box 671539

Marietta , GA 30006-0026

1-888-PHILIPS (744-5477)

Declaration of Conformity for Products Marked with FCC Logo,

United States Only

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause

harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired

operation.

RETURN TO TOP OF THE PAGE

Commission Federale de la Communication (FCC Declaration)

Cet équipement a été testé et déclaré conforme auxlimites des appareils numériques de

class B,aux termes de l'article 15 Des règles de la FCC. Ces limites sont conçues de façon

à fourir une protection raisonnable contre les interférences nuisibles dans le cadre d'une

installation résidentielle. CET appareil produit, utilise et peut émettre des hyperfréquences

qui, si l'appareil n'est pas installé et utilisé selon les consignes données, peuvent causer

des interférences nuisibles aux communications radio. Cependant, rien ne peut garantir

l'absence d'interférences dans le cadre d'une installation particulière. Si cet appareil est la

cause d'interférences nuisibles pour la réception des signaux de radio ou de télévision, ce

qui peut être décelé en fermant l'équipement, puis en le remettant en fonction, l'utilisateur

pourrait essayer de corriger la situation en prenant les mesures suivantes:

Réorienter ou déplacer l'antenne de réception.

Augmenter la distance entre l'équipement et le récepteur.

Brancher l'équipement sur un autre circuit que celui utilisé par le récepteur.

Demander l'aide du marchand ou d'un technicien chevronné en radio/télévision.

Toutes modifications n'ayant pas reçu l'approbation des services compétents en matière de

conformité est susceptible d'interdire à l'utilisateur l'usage du présent équipement.

N'utiliser que des câbles RF armés pour les connections avec des ordinateurs ou périphériques.

CET APPAREIL NUMERIQUE DE LA CLASSE B RESPECTE TOUTES LES EXIGENCES DU REGLEMENT

SUR LE MATERIEL BROUILLEUR DU CANADA.

RETURN TO TOP OF THE PAGE

EN 55022 Compliance (Czech Republic Only)

RETURN TO TOP OF THE PAGE

Polish Center for Testing and Certification Notice

The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All

equipment that works together (computer, monitor, printer, and so on) should have the same power supply

source.

The phasing conductor of the room's electrical installation should have a reserve short-circuit protection device in

the form of a fuse with a nominal value no larger than 16 amperes (A).

To completely switch off the equipment, the power supply cable must be removed from the power supply socket,

which should be located near the equipment and easily accessible.

A protection mark "B" confirms that the equipment is in compliance with the protection usage requirements of

standards PN-93/T-42107 and PN-89/E-06251.

RETURN TO TOP OF THE PAGE

North Europe (Nordic Countries) Information

Placering/Ventilation

VARNING:

FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR

DU STÄLLER DIN UTRUSTNING PÅPLATS.

Placering/Ventilation

ADVARSEL:

SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT

ER NEMT TILGÆNGELIGE.

Paikka/Ilmankierto

VAROITUS:

SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI

IRROTTAA PISTORASIASTA.

Plassering/Ventilasjon

ADVARSEL:

NÅR DETTE UTSTYRET PLASSERES, MÅ DU PASSE PÅ AT KONTAKTENE FOR

STØMTILFØRSEL ER LETTE Å NÅ.

RETURN TO TOP OF THE PAGE

BSMI Notice (Taiwan Only)

RETURN TO TOP OF THE PAGE

Ergonomie Hinweis (nur Deutschland)

Der von uns gelieferte Farbmonitor entspricht den in der "Verordnung über den Schutz vor Schäden durch

Röntgenstrahlen" festgelegten Vorschriften.

Auf der Rückwand des Gerätes befindet sich ein Aufkleber, der auf die Unbedenklichkeit der Inbetriebnahme

hinweist, da die Vorschriften über die Bauart von Störstrahlern nach Anlage III ¤ 5 Abs. 4 der

Röntgenverordnung erfüllt sind.

Damit Ihr Monitor immer den in der Zulassung geforderten Werten entspricht, ist darauf zu achten, daß

Reparaturen nur durch Fachpersonal durchgeführt werden.

nur original-Ersatzteile verwendet werden.

bei Ersatz der Bildröhre nur eine bauartgleiche eingebaut wird.

Aus ergonomischen Gründen wird empfohlen, die Grundfarben Blau und Rot nicht auf dunklem

Untergrund zu verwenden (schlechte Lesbarkeit und erhöhte Augenbelastung bei zu geringem

Zeichenkontrast wären die Folge).

Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 beträgt 70dB (A) oder weniger.

ACHTUNG: BEIM AUFSTELLEN DIESES GERÄTES DARAUF ACHTEN, DAß

NETZSTECKER UND NETZKABELANSCHLUß LEICHT ZUGÄNGLICH SIND.

RETURN TO TOP OF THE PAGE

End-of-Life Disposal

Your new monitor contains materials that can be recycled and reused. Specialized companies can recycle your

product to increase the amount of reusable materials and to minimize the amount to be disposed of.

Please find out about the local regulations on how to dispose of your old monitor from your sales representative.

(For customers in Canada and U.S.A.)

This product may contain lead and/or mercury. Dispose of in accordance to local-state and federal regulations.

For additional information on recycling contact www.eia.org (Consumer Education Initiative)

RETURN TO TOP OF THE PAGE

China RoHS

The People's Republic of China released a regulation called "Management Methods for Controlling Pollution by

Electronic Information Products" or commonly referred to as China RoHS. All products including CRT and LCD

monitor which are produced and sold for China market have to meet China RoHS request.

ページが読み込まれています...

Philips 17S1SB/93 ユーザーマニュアル

Philips 17S1SB/93 ユーザーマニュアル

関連論文