M-10MX 40679045 1MP
Note when operating on batteries
If the M-10MX is being operated on batteries and the batteries are running low,
you may experience problems such as distortion or noise in the audio output.
In particular, if you’ve raised the volume of the device (amp, monitor speaker,
etc.) connected to the DIGITAL OUTPUT connector/jack, high-volume noise
may occur.
If this occurs, you should immediately stop using the unit, and install fresh
batteries.
* If you use the M-10MX with an AC adaptor, you will be able to enjoy extended
operation without having to worry about the battery life.
Copyright © 2006 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the written
permission of ROLAND CORPORATION.
©
-
1
