13
2. Cleaning and Storage
1. Before cleaning the main body, turn the control knob to
[OFF] position. Always remove the plug from the power
socket, lift the body from power base and let it cool down.
2. Main body cleaning: Do not rinse the appliance with water.
Use a damp cloth to clean the appliance enclosure. If it is too
dirty, wipe it with a damp cloth with a little mild detergent,
then wipe with damp cloth.
3. Main body cleaning: Clean it with soft brush or sponge
moisten with mild detergent. Never use cleaning powder
or harsh cleaning tools (e.g. metal-wired brush).
4. After use, some color spots and discolor (e.g. red, milky,
black, etc.) may appear in the pot and on the heating base.
It is because water contains impurities or scale. The harder
the water, the faster the scale will build up. Scale may occur
in different colors, but it is normal phenomenon.
5. Scale is harmless, but too much scale will affect the
performance of the appliance. To avoid, descales regularly.
6. Descaling by the following method:
6.1 Put halved sliced lemon in the pot (Or follow the ratio to
add 20g citric acid per 1L water);
6.2 Fill cold water to the maximum water level “最大水位”;
6.3 Switch on the appliance and let the water boil once. After
boiled, switch off the appliance and let it cool down for
15 minutes. Switch on the operation again and repeat
the boiling process for 3 times;
6.4 Empty the water and clean the pot with a sponge or soft
brush, then rinse with clean water; Repeat the procedure
if some scale remains in the appliance.
Attention! Add water to boil again and then empty the
appliance to clear the smell.
7. Never use poisonous or corrosive detergent for cleaning.
8. After cleaning, let the appliance cool down completely
before storage. Put it in a box and store in a dry place.
When store, wind the power cord at the bottom of power
base. Never wrap it tightly around the power base or put
pressure on it to avoid the power cord damage.
